Fixes#80336
Due to macro expansion, we may end up with spans with an invalid
location and non-root `SyntaxContext`. This commits preserves the
`SyntaxContext` of such spans in the incremental cache, and ensures
that we always hash the `SyntaxContext` when computing the `Fingerprint`
of a `Span`
Previously, we would discard the `SyntaxContext` during serialization to
the incremental cache, causing the span's `Fingerprint` to change across
compilation sessions.
Fixes#79890
Previously, we just copied a `RawDefId` from the 'old' map to the 'new'
map. However, the `RawDefId` for a given `DefPathHash` may be different
in the current compilation session. Using `def_path_hash_to_def_id`
ensures that the `RawDefId` we use is valid in the current session.
On the nopt builders, we disable optimization by default for all tests
which causes the new behavior to take effect and causes the tests to
fail when they should not. By passing the `-O` flag explicitly, we will
always run these tests with optimizations enabled.
Fixes#79661
In incremental compilation mode, we update a `DefPathHash -> DefId`
mapping every time we create a `DepNode` for a foreign `DefId`.
This mapping is written out to the on-disk incremental cache, and is
read by the next compilation session to allow us to lazily decode
`DefId`s.
When we decode a `DepNode` from the current incremental cache, we need
to ensure that any previously-recorded `DefPathHash -> DefId` mapping
gets recorded in the new mapping that we write out. However, PR #74967
didn't do this in all cases, leading to us being unable to decode a
`DefPathHash` in certain circumstances.
This PR refactors some of the code around `DepNode` deserialization to
prevent this kind of mistake from happening again.
Update affected ui & incremental tests to use a user declared variable
bindings instead of temporaries. The former are preserved because of
debuginfo, the latter are not.
Use llvm::computeLTOCacheKey to determine post-ThinLTO CGU reuse
During incremental ThinLTO compilation, we attempt to re-use the
optimized (post-ThinLTO) bitcode file for a module if it is 'safe' to do
so.
Up until now, 'safe' has meant that the set of modules that our current
modules imports from/exports to is unchanged from the previous
compilation session. See PR #67020 and PR #71131 for more details.
However, this turns out be insufficient to guarantee that it's safe
to reuse the post-LTO module (i.e. that optimizing the pre-LTO module
would produce the same result). When LLVM optimizes a module during
ThinLTO, it may look at other information from the 'module index', such
as whether a (non-imported!) global variable is used. If this
information changes between compilation runs, we may end up re-using an
optimized module that (for example) had dead-code elimination run on a
function that is now used by another module.
Fortunately, LLVM implements its own ThinLTO module cache, which is used
when ThinLTO is performed by a linker plugin (e.g. when clang is used to
compile a C proect). Using this cache directly would require extensive
refactoring of our code - but fortunately for us, LLVM provides a
function that does exactly what we need.
The function `llvm::computeLTOCacheKey` is used to compute a SHA-1 hash
from all data that might influence the result of ThinLTO on a module.
In addition to the module imports/exports that we manually track, it
also hashes information about global variables (e.g. their liveness)
which might be used during optimization. By using this function, we
shouldn't have to worry about new LLVM passes breaking our module re-use
behavior.
In LLVM, the output of this function forms part of the filename used to
store the post-ThinLTO module. To keep our current filename structure
intact, this PR just writes out the mapping 'CGU name -> Hash' to a
file. To determine if a post-LTO module should be reused, we compare
hashes from the previous session.
This should unblock PR #75199 - by sheer chance, it seems to have hit
this issue due to the particular CGU partitioning and optimization
decisions that end up getting made.
During incremental ThinLTO compilation, we attempt to re-use the
optimized (post-ThinLTO) bitcode file for a module if it is 'safe' to do
so.
Up until now, 'safe' has meant that the set of modules that our current
modules imports from/exports to is unchanged from the previous
compilation session. See PR #67020 and PR #71131 for more details.
However, this turns out be insufficient to guarantee that it's safe
to reuse the post-LTO module (i.e. that optimizing the pre-LTO module
would produce the same result). When LLVM optimizes a module during
ThinLTO, it may look at other information from the 'module index', such
as whether a (non-imported!) global variable is used. If this
information changes between compilation runs, we may end up re-using an
optimized module that (for example) had dead-code elimination run on a
function that is now used by another module.
Fortunately, LLVM implements its own ThinLTO module cache, which is used
when ThinLTO is performed by a linker plugin (e.g. when clang is used to
compile a C proect). Using this cache directly would require extensive
refactoring of our code - but fortunately for us, LLVM provides a
function that does exactly what we need.
The function `llvm::computeLTOCacheKey` is used to compute a SHA-1 hash
from all data that might influence the result of ThinLTO on a module.
In addition to the module imports/exports that we manually track, it
also hashes information about global variables (e.g. their liveness)
which might be used during optimization. By using this function, we
shouldn't have to worry about new LLVM passes breaking our module re-use
behavior.
In LLVM, the output of this function forms part of the filename used to
store the post-ThinLTO module. To keep our current filename structure
intact, this PR just writes out the mapping 'CGU name -> Hash' to a
file. To determine if a post-LTO module should be reused, we compare
hashes from the previous session.
This should unblock PR #75199 - by sheer chance, it seems to have hit
this issue due to the particular CGU partitioning and optimization
decisions that end up getting made.
If a symbol name can only be imported from one place for a type, and
as long as it was not glob-imported anywhere in the current crate, we
can trim its printed path and print only the name.
This has wide implications on error messages with types, for example,
shortening `std::vec::Vec` to just `Vec`, as long as there is no other
`Vec` importable anywhere.
This adds a new '-Z trim-diagnostic-paths=false' option to control this
feature.
On the good path, with no diagnosis printed, we should try to avoid
issuing this query, so we need to prevent trimmed_def_paths query on
several cases.
This change also relies on a previous commit that differentiates
between `Debug` and `Display` on various rustc types, where the latter
is trimmed and presented to the user and the former is not.
Incomplete features can also be unsound
Some incomplete features do not just ICE, they are also currently unsound (e.g. https://github.com/rust-lang/rust/pull/72029, and also `specialization` -- which is not yet marked incomplete but [should be](https://github.com/rust-lang/rust/pull/71420)). This makes the message reflect that.
While at it I also added a link to the tracking issue, which hopefully should explain what is incomplete/unsound about the feature.
This commit fixes an issue where the codegen backend's selection of LTO
disagreed with what the codegen later thought was being done. Discovered
in #72006 we have a longstanding issue where if `-Clinker-plugin-lto` in
optimized mode is compiled incrementally it will always panic on the
second compilation. The underlying issue turned out to be that the
production of the original artifact determined that LTO should not be
done (because it's being postponed to the linker) but the CGU reuse
selection thought that LTO was done so it was trying to load pre-LTO
artifacts which were never generated.
The fix here is to ensure that the logic when generating code which
determines what kind of LTO is being done is shared amongst the CGU
reuse decision and the backend actually doing LTO. This means that
they'll both be in agreement about whether the previous compilation did
indeed produce incremental pre-LTO artifacts.
Closes#72006
Expansion-driven outline module parsing
After this PR, the parser will not do any conditional compilation or loading of external module files when `mod foo;` is encountered. Instead, the parser only leaves `mod foo;` in place in the AST, with no items filled in. Expansion later kicks in and will load the actual files and do the parsing. This entails that the following is now valid:
```rust
#[cfg(FALSE)]
mod foo {
mod bar {
mod baz; // `foo/bar/baz.rs` doesn't exist, but no error!
}
}
```
Fixes https://github.com/rust-lang/rust/issues/64197.
r? @petrochenkov
Canonicalize inputs to const eval where needed
Canonicalize inputs to const eval, so that they can contain inference variables. Which enables invoking const eval queries even if the current param env has inference variable within it, which can occur during trait selection.
This is a reattempt of #67717, in a far less invasive way.
Fixes#68477
r? @nikomatsakis
cc @eddyb
