Add crate build test for `thumb*` targets. [IRR-2018-embedded]
## Summary
This PR adds `run-make` test that compiles `cortex-m` crate for all supported `thumb*-none-*` targets using `cargo` and stage2 `rustc`.
- Supported `thumb*-none-*` targets:
- thumbv6m-none-eabi (Bare Cortex-M0, M0+, M1)
- thumbv7em-none-eabi (Bare Cortex-M4, M7)
- thumbv7em-none-eabihf (Bare Cortex-M4F, M7F, FPU, hardfloat)
- thumbv7m-none-eabi (Bare Cortex-M3)
## How to run & Example output
I tested locally and all targets succeeded like below:
```
./x.py clean
./x.py test --target thumbv6m-none-eabi,thumbv7em-none-eabi,thumbv7em-none-eabihf,thumbv7m-none-eabi src/test/run-make
```
```
Check compiletest suite=run-make mode=run-make (x86_64-unknown-linux-gnu -> thumbv6m-none-eabi)
running 5 tests
.....
test result: ok. 5 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out
```
## How to re-run
Remove `stamp` file for the test run.
```
rm build/x86_64-unknown-linux-gnu/test/run-make/thumb-none-cortex-m/stamp
```
Then run `test`
```
./x.py test --target thumbv6m-none-eabi,thumbv7em-none-eabi,thumbv7em-none-eabihf,thumbv7m-none-eabi src/test/run-make
(snip)
running 5 tests
iiii.
test result: ok. 1 passed; 0 failed; 4 ignored; 0 measured; 0 filtered out
```
## Artifacts
You can examine the artifacts under the directory below:
```
sekineh@sekineh-VirtualBox:~/rustme10$ ls -l build/x86_64-unknown-linux-gnu/test/run-make/thumb-none-cortex-m/thumb-none-cortex-m/
total 4
drwxrwxr-x 7 sekineh sekineh 4096 8月 14 22:40 cortex-m
```
where `build/x86_64-unknown-linux-gnu/test/run-make/thumb-none-cortex-m/thumb-none-cortex-m/` is came from TMPDIR variable.
## Other notes
For `test.rs` modification, I used the same logic as:
- https://github.com/rust-lang/rust/blame/d8b3c830fbcdd14d085209a8dcc3399151f3286a/src/bootstrap/dist.rs#L652-L657
```
if builder.no_std(target) == Some(true) {
// the `test` doesn't compile for no-std targets
builder.ensure(compile::Std { compiler, target });
} else {
builder.ensure(compile::Test { compiler, target });
}
```
It is a useful snippet when adding `no_std` support to `src/bootstrap` code.
CC @kennytm @jamesmunns @nerdyvaishali
This optionally adds lldb (and clang, which it needs) to the build.
Because rust uses LLVM 7, and because clang 7 is not yet released, a
recent git master version of clang is used.
The lldb that is used includes the Rust plugin.
lldb is only built when asked for, or when doing a nightly build on
macOS. Only macOS is done for now due to difficulties with the Python
dependency.
This allows clearing it out and building it separately from the
compiler. Since it's essentially a different and separate crate this
makes sense to do, each cargo invocation should generally happen in its
own directory.
rustbuild: fix local_rebuild
If we detect a local rebuild (e.g. bootstrap compiler is the same version as target compiler), we set stage to 1.
When trying to build e.g. UnstableBook, we use Mode::ToolBootstrap and stage is 1.
Just allow Mode::ToolBootstrap and stagge != 0 if we are in a local_rebuild
This fixes building current master using current beta (as master hasn't yet been bumped to 1.30).
This should be backported to beta too, as currently we cannot build beta using itself because of that.
r? @alexcrichton
If we detect a local rebuild (e.g. bootstrap compiler is the same version as target compiler), we set stage to 1.
When trying to build e.g. UnstableBook, we use Mode::ToolBootstrap and stage is 1.
Just allow Mode::ToolBootstrap and stagge != 0 if we are in a local_rebuild
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Add timeout to use of `curl` in bootstrap.py.
Recently we've seen a lot of "30 minutes no output" spurious errors while downloading the bootstrap compiler. This added several timeout options so if the "30 minutes no output" errors were caused by connection or transfer issue, we could fail quicker for curl to retry.
Don't format!() string literals
Prefer `to_string()` to `format!()` take 2, this time targetting string literals. In some cases (`&format!("...")` -> `"..."`) also removes allocations. Occurences of `format!("")` are changed to `String::new()`.
Replace push loops with extend() where possible
Or set the vector capacity where I couldn't do it.
According to my [simple benchmark](https://gist.github.com/ljedrz/568e97621b749849684c1da71c27dceb) `extend`ing a vector can be over **10 times** faster than `push`ing to it in a loop:
10 elements (6.1 times faster):
```
test bench_extension ... bench: 75 ns/iter (+/- 23)
test bench_push_loop ... bench: 458 ns/iter (+/- 142)
```
100 elements (11.12 times faster):
```
test bench_extension ... bench: 87 ns/iter (+/- 26)
test bench_push_loop ... bench: 968 ns/iter (+/- 3,528)
```
1000 elements (11.04 times faster):
```
test bench_extension ... bench: 311 ns/iter (+/- 9)
test bench_push_loop ... bench: 3,436 ns/iter (+/- 233)
```
Seems like a good idea to use `extend` as much as possible.
Run the error index tool against the sysroot libdir
Previously when building the error index tool in stage 0 we would
attempt to use stage 0 libraries, but because it depends on rustdoc,
those don't exist: rustdoc is built against stage 1 libraries.
This patch aligns those two and passes the stage 1 libdir to the error
index.
@GuillaumeGomez discovered that this hasn't worked (presumably for a long time now, but not sure).
r? @alexcrichton
Add CI test harness for `thumb*` targets. [IRR-2018-embedded]
This pull request will do the following (rather trivial) changes:
- Fix#52163. In other words, we enabled `./x.py test src/test/run-make` for `no_std` targets.
- Modify `dist-various-1` Dockerfile.
- CI now performs `run-make` test run on the targets below:
- `thumbv6m-none-eabi`
- `thumbv7m-none-eabi`
- `thumbv7em-none-eabi`
- `thumbv7em-none-eabihf`.
- ~~Add `thumb-none` Dockerfile.~~
- ~~Initially, `thumbv7m-none-eabi`, `thumbv7em-none-eabi` and `thumbv7em-none-eabihf` are included as the tested target. `thumbv6m-none-eabi` is disabled for now because LLVM support is not certain.~~
- ~~Add `thumb-none` to .travis.yml~~
Note:
- `run-make` tests are not implemented yet. This PR is test harness only.
The amount of change is very small, but I'd like to open the pull request while the change is trivial.
Because I'm not very used to pull request process, I want to make a small progress first. This PR will be a foundation for later additions.
CC @kennytm @jamesmunns @nerdyvaishali
Previously when building the error index tool in stage 0 we would
attempt to use stage 0 libraries, but because it depends on rustdoc,
those don't exist: rustdoc is built against stage 1 libraries.
This patch aligns those two and passes the stage 1 libdir to the error
index.
Allow clippy to be installed with make install
After #51122 clippy is available as a component but doesn't install when building from source.
This PR allows to install clippy with extended tools.
Enable incremental independent of stage
Previously we'd only do so for stage 0 but with keep-stage
improvements it seems likely that we'll see more developers working in
the stage 1, so we should allow enabling incremental for them.
Previously we'd only do so for stage 0 but with keep-stage
improvements it seems likely that we'll see more developers working in
the stage 1, so we should allow enabling incremental for them.
Ideally, the check we probably want is to only enable incremental for
the last compiler build scheduled, but there's no good way to do so
today. Just enabling incremental in all stages should be sufficient;
we may be doing extra work that's needles -- compiling incrementally
something that will never be recompiled in-place -- but that should be
sufficiently unlikely (i.e., users either don't care or won't be
compiling the compiler twice).
