Add `AliasKind::Weak` for type aliases.
`type Foo<T: Debug> = Bar<T>;` does not check `T: Debug` at use sites of `Foo<NotDebug>`, because in contrast to a
```rust
trait Identity {
type Identity;
}
impl<T: Debug> Identity for T {
type Identity = T;
}
<NotDebug as Identity>::Identity
```
type aliases do not exist in the type system, but are expanded to their aliased type immediately when going from HIR to the type layer.
Similarly:
* a private type alias for a public type is a completely fine thing, even though it makes it a bit hard to write out complex times sometimes
* rustdoc expands the type alias, even though often times users use them for documentation purposes
* diagnostics show the expanded type, which is confusing if the user wrote a type alias and the diagnostic talks about another type that they don't know about.
For type alias impl trait, these issues do not actually apply in most cases, but sometimes you have a type alias impl trait like `type Foo<T: Debug> = (impl Debug, Bar<T>);`, which only really checks it for `impl Debug`, but by accident prevents `Bar<T>` from only being instantiated after proving `T: Debug`. This PR makes sure that we always check these bounds explicitly and don't rely on an implementation accident.
To not break all the type aliases out there, we only use it when the type alias contains an opaque type. We can decide to do this for all type aliases over an edition.
Or we can later extend this to more types if we figure out the back-compat concerns with suddenly checking such bounds.
As a side effect, easily allows fixing https://github.com/rust-lang/rust/issues/108617, which I did.
fixes https://github.com/rust-lang/rust/issues/108617
Ignore the always part of #[inline(always)] in MIR inlining
`#[inline(always)]` is used in two cases: for functions that are so trivial it is always profitable to inline them, but also for functions which LLVM thinks are a bad inlining candidate, but which actually turn out to be profitable to inline. That second justification doesn't apply to the MIR inliner, so ignoring our cost estimation for these functions is not necessarily the right right thing to do.
This is basically a wash on non-check runs and a perf benefit in check runs. There are some notable regressions, and I think we might be able to claw those back by turning `#[inline(always)]` into a stronger hint. But I think this PR stands decently on its own as a tidy simplification.
rustdoc: Add search result item types after their name
Here what it looks like:
The idea is to improve accessibility by providing this information directly in the text and not only in the text color. Currently we already use it for doc aliases and for primitive types, so I extended it to all types.
r? `@notriddle`
Rollup of 8 pull requests
Successful merges:
- #112403 (Prevent `.eh_frame` from being emitted for `-C panic=abort`)
- #112517 (`suspicious_double_ref_op`: don't lint on `.borrow()`)
- #112529 (Extend `unused_must_use` to cover block exprs)
- #112614 (tweak suggestion for argument-position `impl ?Sized`)
- #112654 (normalize closure output in equate_inputs_and_outputs)
- #112660 (Migrate GUI colors test to original CSS color format)
- #112664 (Add support for test tmpdir to fuchsia test runner)
- #112669 (Fix comment for ptr alignment checks in codegen)
r? `@ghost`
`@rustbot` modify labels: rollup
Add support for test tmpdir to fuchsia test runner
Also format the script to keep the code nice.
This fixes the `tests/ui/std/switch-stdout.rs` test on Fuchsia.
r? `@tmandry`
Extend `unused_must_use` to cover block exprs
Given code like
```rust
#[must_use]
fn foo() -> i32 {
42
}
fn warns() {
{
foo();
}
}
fn does_not_warn() {
{
foo()
};
}
fn main() {
warns();
does_not_warn();
}
```
### Before This PR
```
warning: unused return value of `foo` that must be used
--> test.rs:8:9
|
8 | foo();
| ^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
help: use `let _ = ...` to ignore the resulting value
|
8 | let _ = foo();
| +++++++
warning: 1 warning emitted
```
### After This PR
```
warning: unused return value of `foo` that must be used
--> test.rs:8:9
|
8 | foo();
| ^^^^^
|
= note: `#[warn(unused_must_use)]` on by default
help: use `let _ = ...` to ignore the resulting value
|
8 | let _ = foo();
| +++++++
warning: unused return value of `foo` that must be used
--> test.rs:14:9
|
14 | foo()
| ^^^^^
|
help: use `let _ = ...` to ignore the resulting value
|
14 | let _ = foo();
| +++++++ +
warning: 2 warnings emitted
```
Fixes#104253.
Sync rustc_codegen_cranelift
The main highlights this time are a cranelift update, some x86 vendor intrinsic implementations and preparations for testing cg_clif in CI here.
r? `@ghost`
`@rustbot` label +A-codegen +A-cranelift +T-compiler
Rollup of 6 pull requests
Successful merges:
- #111212 (Add casting suggestion when assigning negative 2's complement bin or hex literal to a size compatible signed integer)
- #112304 (Add chapter in rustdoc book for re-exports and add a regression test for `#[doc(hidden)]` behaviour)
- #112486 (Fix suggestion for E0404 not dealing with multiple generics)
- #112562 (rustdoc-gui: allow running on Windows)
- #112621 (Mention `env!` in `option_env!`'s docs)
- #112634 (add InlineConst check)
r? `@ghost`
`@rustbot` modify labels: rollup
rustdoc-gui: allow running on Windows
This adds few fixes to allow running `python x.py test rustdoc-gui` on Windows.
* path to npm required to be `npm.cmd` on Windows (otherwise don't work for me)
* properly parse node module version on Windows
* properly provide path to browser-ui-test runner (fixed in #112613)
r? `@GuillaumeGomez`
CI: merge `msvc` test CI jobs
Merges `msvc` jobs together to save CI time. Currently, both runners take about 1h 15 minutes, but nowadays it should be possible to just run everything in a single job.
CI run: https://github.com/rust-lang/rust/actions/runs/5272144087/jobs/9534015536?pr=112633 (both finish under ~1h 35 minutes)
After this change, we no longer test both `x.py` and `x.ps1`, but I don't suppose that it's worth it to spend 1.5 hours of additional CI time just for that. I suggest to run all tests using e.g. `x.py` and then run just `x.ps1 test --stage 2 --force-rerun tests/<single-quick-test>`.
Also I'm not sure if it's worth it to keep using the Makefile for this.
Update cargo
11 commits in 49b6d9e179a91cf7645142541c9563443f64bf2b..0c14026aa84ee2ec4c67460c0a18abc8519ca6b2
2023-06-09 17:21:19 +0000 to 2023-06-14 18:43:05 +0000
- fix(embedded): Don't append hash to bin names (rust-lang/cargo#12269)
- Fix version requirement example in Dependency Resolution, SemVer compatibility section (rust-lang/cargo#12267)
- Update triagebot links. (rust-lang/cargo#12265)
- Show a better error when container tests fail. (rust-lang/cargo#12264)
- chore: update dependencies (rust-lang/cargo#12261)
- refactor(embedded) (rust-lang/cargo#12262)
- docs: clarify the use of `default` branch instead of `main` by default (rust-lang/cargo#12251)
- docs: update changelog for 1.71 backport and 1.72 (rust-lang/cargo#12256)
- feat: Initial support for single-file packages (rust-lang/cargo#12245)
- test(z-flags): Verify `-Z` flags list is sorted (rust-lang/cargo#12224)
- refactor: registry data kinds cleanup (rust-lang/cargo#12248)
---
This commit also update LICENSE exceptions, as Cargo introduced a newer version of `dunce` and `blake3` as dependencies.
r? `@ghost`
rustdoc-search: clean up type unification and "unboxing"
This PR redesigns parameter matching, return matching, and generics matching to use a single function that compares two lists of types.
It also makes the algorithms more consistent, so the "unboxing" behavior where `Vec<i32>` is considered a match for `i32` works inside generics, and not just at the top level.
Fix rustdoc-gui tests on Windows
The browser-ui-test update contains fixes needed for backslash handling (they were not correctly escaped).
Since we have a mix of slash and backslash in some tests, I replaced `DOC_FOLDER` variable backslashes with slashes.
And finally it seemed like the unicode escaped wasn't much appreciated on Windows for some reason so I used the character directly.
cc `@klensy`
r? `@notriddle`
Add support for targets without unwinding in `mir-opt`, and improve `--bless` for it
The main goal of this PR is to add support for targets without unwinding support in the `mir-opt` test suite, by adding the `EMIT_MIR_FOR_EACH_PANIC_STRATEGY` comment. Similarly to 32bit vs 64bit, when that comment is present, blessed output files will have the `.panic-unwind` or `.panic-abort` suffix, and the right one will be chosen depending on the target's panic strategy.
The `EMIT_MIR_FOR_EACH_PANIC_STRATEGY` comment replaced all the `ignore-wasm32` comments in the `mir-opt` test suite, as those comments were added due to `wasm32` being a target without unwinding support. The comment was also added on other tests that were only executed on x86 but were still panic strategy dependent.
The `mir-opt` suite was then blessed, which caused a ton of churn as most of the existing output files had to be renamed and (mostly) duplicated with the abort strategy.
---
After [asking on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/mir-opt.20tests.20and.20panic.3Dabort), the main concern about this change is it'd make blessing the `mir-opt` suite even harder, as you'd need to both bless it with an unwinding target and an aborting target. This exacerbated the current situation, where you'd need to bless it with a 32bit and a 64bit target already.
Because of that, this PR also makes significant enhancements to `--bless` for the `mir-opt` suite, where it will automatically bless the suite four times with different targets, while requiring minimal cross-compilation.
To handle the 32bit vs 64bit blessing, there is now an hardcoded list of target mapping between 32bit and 64bit. The goal of the list is to find a related target that will *probably* work without requiring additional cross-compilation toolchains on the system. If a mapping is found, bootstrap will bless the suite with both targets, otherwise just with the current target.
To handle the panic strategy blessing (abort vs unwind), I had to resort to what I call "synthetic targets". For each of the target we're blessing (so either the current one, or a 32bit and a 64bit depending on the previous paragraph), bootstrap will extract the JSON spec of the target and change it to include `"panic-strategy": "abort"`. It will then build the standard library with this synthetic target, and bless the `mir-opt` suite with it.
As a result of these changes, blessing the `mir-opt` suite will actually bless it two or four times with different targets, ensuring all possible variants are actually blessed.
---
This PR is best reviewed commit-by-commit.
r? `@jyn514`
cc `@saethlin` `@oli-obk`
Rollup of 5 pull requests
Successful merges:
- #112197 (Erase regions even if normalization fails in writeback (in new solver))
- #112495 (fix(resolve): update shadowed_glob more precision)
- #112520 (Fix the overflow issue for transmute_generic_consts)
- #112571 (rustdoc-search: search never type with `!`)
- #112581 ([rustdoc] Fix URL encoding of % sign)
r? `@ghost`
`@rustbot` modify labels: rollup
rustdoc-search: search never type with `!`
This feature extends rustdoc to support the syntax that most users will naturally attempt to use to search for diverging functions. Part of #60485
It's already possible to do this search with `primitive:never`, but that's not what the Rust language itself uses, so nobody will try it if they aren't told or helped along.
Because tiny CGUs make compilation less efficient *and* result in worse
generated code.
We don't do this when the number of CGUs is explicitly given, because
there are times when the requested number is very important, as
described in some comments within the commit. So the commit also
introduces a `CodegenUnits` type that distinguishes between default
values and user-specified values.
This change has a roughly neutral effect on walltimes across the
rustc-perf benchmarks; there are some speedups and some slowdowns. But
it has significant wins for most other metrics on numerous benchmarks,
including instruction counts, cycles, binary size, and max-rss. It also
reduces parallelism, which is good for reducing jobserver competition
when multiple rustc processes are running at the same time. It's smaller
benchmarks that benefit the most; larger benchmarks already have CGUs
that are all larger than the minimum size.
Here are some example before/after CGU sizes for opt builds.
- html5ever
- CGUs: 16, mean size: 1196.1, sizes: [3908, 2992, 1706, 1652, 1572,
1136, 1045, 948, 946, 938, 579, 471, 443, 327, 286, 189]
- CGUs: 4, mean size: 4396.0, sizes: [6706, 3908, 3490, 3480]
- libc
- CGUs: 12, mean size: 35.3, sizes: [163, 93, 58, 53, 37, 8, 2 (x6)]
- CGUs: 1, mean size: 424.0, sizes: [424]
- tt-muncher
- CGUs: 5, mean size: 1819.4, sizes: [8508, 350, 198, 34, 7]
- CGUs: 1, mean size: 9075.0, sizes: [9075]
Note that CGUs of size 100,000+ aren't unusual in larger programs.
This feature extends rustdoc to support the syntax that most users will
naturally attempt to use to search for diverging functions.
Part of #60485
It's already possible to do this search with `primitive:never`, but
that's not what the Rust language itself uses, so nobody will try it if
they aren't told or helped along.
Rollup of 4 pull requests
Successful merges:
- #112302 (Suggest using `ptr::null_mut` when user provided `ptr::null` to a function expecting `ptr::null_mut`)
- #112416 (Fix debug ICE for extern type with where clauses)
- #112527 (Add windows_sys type definitions for ARM32 manually)
- #112546 (new solver: extend assert to other aliases)
r? `@ghost`
`@rustbot` modify labels: rollup
implement stdout streaming in `render_tests::Renderer`
This way, we can show the test dot characters on the console immediately, without having to wait for the entire line to finish.
cc `@GuillaumeGomez`
