These tend to have special handling in a bunch of places anyway, so the variant helps remember that. And I think it's easier to grok than non-Scalar Aggregates sometimes being `Immediates` (like I got wrong and caused 109992). As a minor bonus, it means we don't need to generate poison LLVM values for them to pass around in `OperandValue::Immediate`s.
offset_of: don't require type to be `Sized`
Fixes#112051
~~The RFC [explicitly forbids](https://rust-lang.github.io/rfcs/3308-offset_of.html#limitations) non-`Sized` types, but it looks like only the fields being recursed into were checked. The sized check also seemed to have been completely missing for tuples~~
change `BorrowKind::Unique` to be a mutating `PlaceContext`
fixes#112056
I believe that `BorrowKind::Unique` is a footgun in general, so I added a FIXME and opened https://github.com/rust-lang/rust/issues/112072. This is a bit too involved for this PR though.
Optimize scalar and scalar pair representations loaded from ByRef in llvm
in https://github.com/rust-lang/rust/pull/105653 I noticed that we were generating suboptimal LLVM IR if we had a `ConstValue::ByRef` that could be represented by a `ScalarPair`. Before https://github.com/rust-lang/rust/pull/105653 this is probably rare, but after it, every slice will go down this suboptimal code path that requires LLVM to untangle a bunch of indirections and translate static allocations that are only used once to read a scalar pair from.
Use `Option::is_some_and` and `Result::is_ok_and` in the compiler
`.is_some_and(..)`/`.is_ok_and(..)` replace `.map_or(false, ..)` and `.map(..).unwrap_or(false)`, making the code more readable.
This PR is a sibling of https://github.com/rust-lang/rust/pull/111873#issuecomment-1561316515
Allow MIR debuginfo to point to a variable's address
MIR optimizations currently do not to operate on borrowed locals.
When enabling #106285, many borrows will be left as-is because they are used in debuginfo. This pass allows to replace this pattern directly in MIR debuginfo:
```rust
a => _1
_1 = &raw? mut? _2
```
becomes
```rust
a => &_2
// No statement to borrow _2.
```
This pass is implemented as a drive-by in ReferencePropagation MIR pass.
This transformation allows following following MIR opts to treat _2 as an unborrowed local, and optimize it as such, even in builds with debuginfo.
In codegen, when encountering `a => &..&_2`, we create a list of allocas:
```llvm
store ptr %_2.dbg.spill, ptr %a.ref0.dbg.spill
store ptr %a.ref0.dbg.spill, ptr %a.ref1.dbg.spill
...
call void `@llvm.dbg.declare(metadata` ptr %a.ref{n}.dbg.spill, /* ... */)
```
Caveat: this transformation looses the exact type, we do not differentiate `a` as a immutable, mutable reference or a raw pointer. Everything is declared to `*mut` to codegen. I'm not convinced this is a blocker.
Align unsized locals
Allocate an extra space for unsized locals and manually align the storage, since alloca doesn't support dynamic alignment.
Fixes#71416.
Fixes#71695.
Make `(try_)subst_and_normalize_erasing_regions` take `EarlyBinder`
Changes `subst_and_normalize_erasing_regions` and `try_subst_and_normalize_erasing_regions` to take `EarlyBinder<T>` instead of `T`.
(related to #105779)
This was suggested by `@BoxyUwU` in https://github.com/rust-lang/rust/pull/107753#discussion_r1105828139. After changing `type_of` to return `EarlyBinder`, there were several places where the binder was immediately skipped to call `tcx.subst_and_normalize_erasing_regions`, only for the binder to be reconstructed inside of that method.
r? `@BoxyUwU`
Add cross-language LLVM CFI support to the Rust compiler
This PR adds cross-language LLVM Control Flow Integrity (CFI) support to the Rust compiler by adding the `-Zsanitizer-cfi-normalize-integers` option to be used with Clang `-fsanitize-cfi-icall-normalize-integers` for normalizing integer types (see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space). For more information about LLVM CFI and cross-language LLVM CFI support for the Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and -Zsanitizer-cfi-normalize-integers, and requires proper (i.e., non-rustc) LTO (i.e., -Clinker-plugin-lto).
Thank you again, ``@bjorn3,`` ``@nikic,`` ``@samitolvanen,`` and the Rust community for all the help!
This commit adds cross-language LLVM Control Flow Integrity (CFI)
support to the Rust compiler by adding the
`-Zsanitizer-cfi-normalize-integers` option to be used with Clang
`-fsanitize-cfi-icall-normalize-integers` for normalizing integer types
(see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust
-compiled code "mixed binaries" (i.e., for when C or C++ and Rust
-compiled code share the same virtual address space). For more
information about LLVM CFI and cross-language LLVM CFI support for the
Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and
-Zsanitizer-cfi-normalize-integers, and requires proper (i.e.,
non-rustc) LTO (i.e., -Clinker-plugin-lto).
Use MIR's `Offset` for pointer `add` too
~~Status: draft while waiting for #110822 to land, since this is built atop that.~~
~~r? `@ghost~~`
Canonical Rust code has mostly moved to `add`/`sub` on pointers, which take `usize`, instead of `offset` which takes `isize`. (And, relatedly, when `sub_ptr` was added it turned out it replaced every single in-tree use of `offset_from`, because `usize` is just so much more useful than `isize` in Rust.)
Unfortunately, `intrinsics::offset` could only accept `*const` and `isize`, so there's a *huge* amount of type conversions back and forth being done. They're identity conversions in the backend, but still end up producing quite a lot of unhelpful MIR.
This PR changes `intrinsics::offset` to accept `*const` *and* `*mut` along with `isize` *and* `usize`. Conveniently, the backends and CTFE already handle this, since MIR's `BinOp::Offset` [already supports all four combinations](adaac6b166/compiler/rustc_const_eval/src/transform/validate.rs (L523-L528)).
To demonstrate the difference, I added some `mir-opt/pre-codegen/` tests around slice indexing. Here's the difference to `[T]::get_mut`, since it uses `<*mut _>::add` internally:
```diff
`@@` -79,30 +70,21 `@@` fn slice_get_mut_usize(_1: &mut [u32], _2: usize) -> Option<&mut u32> {
StorageLive(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageLive(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
_9 = _8 as *mut u32 (PtrToPtr); // scope 11 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _13 = _2 as isize (IntToInt); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageLive(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _15 = _9 as *const u32 (Pointer(MutToConstPointer)); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _14 = Offset(move _15, _13); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_15); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- _7 = move _14 as *mut u32 (PtrToPtr); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_14); // scope 15 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
- StorageDead(_13); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
+ _7 = Offset(_9, _2); // scope 13 at $SRC_DIR/core/src/ptr/mut_ptr.rs:LL:COL
StorageDead(_9); // scope 6 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_12); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
StorageDead(_11); // scope 3 at $SRC_DIR/core/src/slice/index.rs:LL:COL
```
https://github.com/rust-lang/rust/pull/110837/commits/1c1c8e442add0f46905a57a25a6cba52b8b0c54d#diff-a841b6a4538657add3f39bc895744331453d0625e7aace128b1f604f0b63c8fdR80
Nicer ICE for #67981
Provides a slightly nicer ICE for #67981, documenting the problem. A proper fix will be necessary before `#![feature(unsized_fn_params)]` can be stabilized.
The problem is that the design of the `"rust-call"` ABI is fundamentally not compatible with `unsized_fn_params`. `"rust-call"` functions need to collect their arguments into a tuple, but if the arguments are not `Sized`, said tuple is potentially not even a valid type—and if it is, it requires `alloca` to create.
``@rustbot`` label +A-abi +A-codegen +F-unboxed_closures +F-unsized_fn_params
They're semantically the same, so this means the backends don't need to handle the intrinsic and means fewer MIR basic blocks in pointer arithmetic code.
Preserve argument indexes when inlining MIR
We store argument indexes on VarDebugInfo. Unlike the previous method of relying on the variable index to know whether a variable is an argument, this survives MIR inlining.
We also no longer check if var.source_info.scope is the outermost scope. When a function gets inlined, the arguments to the inner function will no longer be in the outermost scope. What we care about though is whether they were in the outermost scope prior to inlining, which we know by whether we assigned an argument index.
Fixes#83217
I considered using `Option<NonZeroU16>` instead of `Option<u16>` to store the index. I didn't because `TypeFoldable` isn't implemented for `NonZeroU16` and because it looks like due to padding, it currently wouldn't make any difference. But I indexed from 1 anyway because (a) it'll make it easier if later it becomes worthwhile to use a `NonZeroU16` and because the arguments were previously indexed from 1, so it made for a smaller change.
This is my first PR on rust-lang/rust, so apologies if I've gotten anything not quite right.
