stabilize union with 'ManuallyDrop' fields and 'impl Drop for Union'
As [discussed by @SimonSapin and @withoutboats](https://github.com/rust-lang/rust/issues/55149#issuecomment-634692020), this PR proposes to stabilize parts of the `untagged_union` feature gate:
* It will be possible to have a union with field type `ManuallyDrop<T>` for any `T`.
* While at it I propose we also stabilize `impl Drop for Union`; to my knowledge, there are no open concerns around this feature.
In the RFC discussion, we also talked about allowing `&mut T` as another non-`Copy` non-dropping type, but that felt to me like an overly specific exception so I figured we'd wait if there is actually any use for such a special case.
Some things remain unstable and still require the `untagged_union` feature gate:
* Union with fields that do not drop, are not `Copy`, and are not `ManuallyDrop<_>`. The reason to not stabilize this is to avoid semver concerns around libraries adding `Drop` implementations later. (This is already not fully semver compatible as, to my knowledge, the borrow checker will exploit the non-dropping nature of any type, but it seems prudent to avoid further increasing the amount of trouble adding an `impl Drop` can cause.)
Due to this, quite a few tests still need the `untagged_union` feature, but I think the ones where I could remove the feature flag provide good test coverage for the stable part.
Cc @rust-lang/lang
Stabilize move_ref_pattern
# Implementation
- Initially the rule was added in the run-up to 1.0. The AST-based borrow checker was having difficulty correctly enforcing match expressions that combined ref and move bindings, and so it was decided to simplify forbid the combination out right.
- The move to MIR-based borrow checking made it possible to enforce the rules in a finer-grained level, but we kept the rule in place in an effort to be conservative in our changes.
- In #68376, @Centril lifted the restriction but required a feature-gate.
- This PR removes the feature-gate.
Tracking issue: #68354.
# Description
This PR is to stabilize the feature `move_ref_pattern`, which allows patterns
containing both `by-ref` and `by-move` bindings at the same time.
For example: `Foo(ref x, y)`, where `x` is `by-ref`,
and `y` is `by-move`.
The rules of moving a variable also apply here when moving *part* of a variable,
such as it can't be referenced or moved before.
If this pattern is used, it would result in *partial move*, which means that
part of the variable is moved. The variable that was partially moved from
cannot be used as a whole in this case, only the parts that are still
not moved can be used.
## Documentation
- The reference (rust-lang/reference#881)
- Rust by example (rust-lang/rust-by-example#1377)
## Tests
There are many tests, but I think one of the comperhensive ones:
- [borrowck-move-ref-pattern-pass.rs](85fbf49ce0/src/test/ui/pattern/move-ref-patterns/borrowck-move-ref-pattern-pass.rs)
- [borrowck-move-ref-pattern.rs](85fbf49ce0/src/test/ui/pattern/move-ref-patterns/borrowck-move-ref-pattern.rs)
# Examples
```rust
#[derive(PartialEq, Eq)]
struct Finished {}
#[derive(PartialEq, Eq)]
struct Processing {
status: ProcessStatus,
}
#[derive(PartialEq, Eq)]
enum ProcessStatus {
One,
Two,
Three,
}
#[derive(PartialEq, Eq)]
enum Status {
Finished(Finished),
Processing(Processing),
}
fn check_result(_url: &str) -> Status {
// fetch status from some server
Status::Processing(Processing {
status: ProcessStatus::One,
})
}
fn wait_for_result(url: &str) -> Finished {
let mut previous_status = None;
loop {
match check_result(url) {
Status::Finished(f) => return f,
Status::Processing(p) => {
match (&mut previous_status, p.status) {
(None, status) => previous_status = Some(status), // first status
(Some(previous), status) if *previous == status => {} // no change, ignore
(Some(previous), status) => { // Now it can be used
// new status
*previous = status;
}
}
}
}
}
}
```
Before, we would have used:
```rust
match (&previous_status, p.status) {
(Some(previous), status) if *previous == status => {} // no change, ignore
(_, status) => {
// new status
previous_status = Some(status);
}
}
```
Demonstrating *partial move*
```rust
fn main() {
#[derive(Debug)]
struct Person {
name: String,
age: u8,
}
let person = Person {
name: String::from("Alice"),
age: 20,
};
// `name` is moved out of person, but `age` is referenced
let Person { name, ref age } = person;
println!("The person's age is {}", age);
println!("The person's name is {}", name);
// Error! borrow of partially moved value: `person` partial move occurs
//println!("The person struct is {:?}", person);
// `person` cannot be used but `person.age` can be used as it is not moved
println!("The person's age from person struct is {}", person.age);
}
```
Refactor io/buffered.rs into submodules
This pull request splits `BufWriter`, `BufReader`, `LineWriter`, and `LineWriterShim` (along with their associated tests) into separate submodules. It contains no functional changes. This change is being made in anticipation of adding another type of buffered writer which can be switched between line- and block-buffering mode.
Part of a series of pull requests resolving #60673.
mangling: mangle impl params w/ v0 scheme
This PR modifies v0 symbol mangling to include all generic parameters from impl blocks (not just those used in the self type) - an alternative fix to #75326.
```
original:
_RNCNvXCs4fqI2P2rA04_19impl_param_manglingINtB4_3FooppENtNtNtNtCsfnEnqCNU58Z_4core4iter6traits8iterator8Iterator4next0B4_
// |------------ B4_ ----------------|
// _R (N C (N v (X (C ((s 4fqI2p2rA04_) 19impl_param_mangling)) (I (N t B4_ 3Foo) pp E) (N t (N t (N t (N t (C ((s fnEnqCNU58Z_) 4core)) 4iter) 6traits) 8iterator) 8Iterator)) 4next) 0) B4_
modified:
_RNvXINICs4fqI2P2rA04_11issue_753260pppEINtB5_3FooppENtNtNtNtCsfnEnqCNU58Z_4core4iter6traits8iterator8Iterator4nextB5_
// _R (N v (X (I (N I (C ((s 4fqI2P2rA04_) 11issue_75326)) 0) ppp E) (I (N t B5_ 3Foo) pp E) (N t (N t (N t (N t (C ((s fnEnqCNU58Z_) 4core)) 4iter) 6traits) 8iterator) 8Iterator)) 4next) B5_
// | ^ |
// | | |
// | new impl namespace |
```
~~Submitted as a draft as after some discussion w/ @eddyb, I'm going to do some investigation into (yet more alternative) changes to polymorphization that might remove the necessity for this.~~
r? @eddyb
This commit modifies v0 symbol mangling to include all generic
parameters from impl blocks (not just those used in the self type).
Signed-off-by: David Wood <david@davidtw.co>
Replace tuple of infer vars for upvar_tys with single infer var
This commit allows us to decide the number of captures required after
completing capture ananysis, which is required as part of implementing
RFC-2229.
closes https://github.com/rust-lang/project-rfc-2229/issues/4
r? `@nikomatsakis`
Refactor AST pretty-printing to allow skipping insertion of extra parens
Fixes#75734
Makes progress towards #43081
Unblocks PR #76130
When pretty-printing an AST node, we may insert additional parenthesis
to ensure that precedence is properly preserved in code we output.
However, the proc macro implementation relies on comparing a
pretty-printed AST node to the captured `TokenStream`. Inserting extra
parenthesis changes the structure of the reparsed `TokenStream`, making
the comparison fail.
This PR refactors the AST pretty-printing code to allow skipping the
insertion of additional parenthesis. Several freestanding methods are
moved to trait methods on `PrintState`, which keep track of an internal
`insert_extra_parens` flag. This flag is normally `true`, but we expose
a public method which allows pretty-printing a nonterminal with
`insert_extra_parens = false`.
To avoid changing the public interface of `rustc_ast_pretty`, the
freestanding `_to_string` methods are changed to delegate to a
newly-crated `State`. The main pretty-printing code is moved to a new
`state` module to ensure that it does not accidentally call any of these
public helper functions (instead, the internal functions with the same
name should be used).
Fixes#74616
Makes progress towards #43081
Unblocks PR #76130
When pretty-printing an AST node, we may insert additional parenthesis
to ensure that precedence is properly preserved in code we output.
However, the proc macro implementation relies on comparing a
pretty-printed AST node to the captured `TokenStream`. Inserting extra
parenthesis changes the structure of the reparsed `TokenStream`, making
the comparison fail.
This PR refactors the AST pretty-printing code to allow skipping the
insertion of additional parenthesis. Several freestanding methods are
moved to trait methods on `PrintState`, which keep track of an internal
`insert_extra_parens` flag. This flag is normally `true`, but we expose
a public method which allows pretty-printing a nonterminal with
`insert_extra_parens = false`.
To avoid changing the public interface of `rustc_ast_pretty`, the
freestanding `_to_string` methods are changed to delegate to a
newly-crated `State`. The main pretty-printing code is moved to a new
`state` module to ensure that it does not accidentally call any of these
public helper functions (instead, the internal functions with the same
name should be used).
Depending on if upvar_tys inferred or not, we were returning either an
inference variable which later resolves to a tuple or else the upvar tys
themselves
Co-authored-by: Roxane Fruytier <roxane.fruytier@hotmail.com>
This commit allows us to decide the number of captures required after
completing capture ananysis, which is required as part of implementing
RFC-2229.
Co-authored-by: Aman Arora <me@aman-arora.com>
Co-authored-by: Jenny Wills <wills.jenniferg@gmail.com>
