Reexport tests without polluting namespaces
This should fix issue #52557.
Basically now we gensym a new name for the test function and reexport that.
That way the test function's reexport name can't conflict because it was impossible for the test author to write it down.
We then use a `use` statement to expose the original name using the original visibility.
Andrew Chin recently pointed out (rust-lang/cargo#5846) that it's
surprising that `cargo fix` (now shipping with Cargo itself!) doesn't
fix very common lint warnings, which is as good of a reminder as any
that we should finish #50723.
rustc_resolve: record single-segment extern crate import resolutions.
Fixes#52489 by recording special-cased single-segment imports for later (e.g. stability) checks.
cc @alexcrichton @Mark-Simulacrum @petrochenkov
Does this need to be backported?
rustc: Trim down the `rust_2018_idioms` lint group
These migration lints aren't all up to par in terms of a good migration
experience. Some, like `unreachable_pub`, hit bugs like #52665 and unprepared
macros to be handled enough of the time. Others like linting against
`#[macro_use]` are swimming upstream in an ecosystem that's not quite ready (and
slightly buggy pending a few current PRs).
The general idea is that we will continue to recommend the `rust_2018_idioms`
lint group as part of the transition guide (as an optional step) but we'll be
much more selective about which lints make it into this group. Only those with a
strong track record of not causing too much churn will make the cut.
cc #52679
[NLL] Allow conflicting borrows of promoted length zero arrays
This is currently overkill as there's no way to create two conflicting borrows of any promoted.
It is possible that the following code might not fail due to const eval in the future (@oli-obk?). In which case either the array marked needs to not be promoted, or to be checked for conflicts
```rust
static mut A: () = {
let mut y = None;
let z;
let mut done_y = false;
loop {
let x = &mut [1]; // < this array
if done_y {
z = x;
break;
}
y = Some(x);
done_y = true;
}
some_const_fn(y, z); // some_const_fn expects that y to not alias z.
};
```
r? @pnkfelix @nikomatsakis
closes#52671
cc #51823
After talking about the PR with eddyb, I decided it was best to try to
have some test cases that simplify the problem down to its core, so
that people trying to understand what the issue is here will see those
core examples first.
(Presumably the place that borrow_check ends up reporting for the
error about is no longer the root `Local` itself, and thus the note
diagnostic here stops firing.)
These migration lints aren't all up to par in terms of a good migration
experience. Some, like `unreachable_pub`, hit bugs like #52665 and unprepared
macros to be handled enough of the time. Others like linting against
`#[macro_use]` are swimming upstream in an ecosystem that's not quite ready (and
slightly buggy pending a few current PRs).
The general idea is that we will continue to recommend the `rust_2018_idioms`
lint group as part of the transition guide (as an optional step) but we'll be
much more selective about which lints make it into this group. Only those with a
strong track record of not causing too much churn will make the cut.
cc #52679
rustc: Handle linker diagnostics from LLVM
Previously linker diagnostic were being hidden when two modules were linked
together but failed to link. This commit fixes the situation by ensuring that we
have a diagnostic handler installed and also adds support for handling linker
diagnostics.
Rollup of 30 pull requests
Successful merges:
- #52340 (Document From trait implementations for OsStr, OsString, CString, and CStr)
- #52628 (Cleanup some rustdoc code)
- #52732 (Remove unstable and deprecated APIs)
- #52745 (Update clippy to latest master)
- #52771 (Clarify thread::park semantics)
- #52778 (Improve readability of serialize.rs)
- #52810 ([NLL] Don't make "fake" match variables mutable)
- #52821 (pretty print for std::collections::vecdeque)
- #52822 (Fix From<LocalWaker>)
- #52824 (Fix -Wpessimizing-move warnings in rustllvm/PassWrapper)
- #52825 (Make sure #47772 does not regress)
- #52831 (remove references to AUTHORS.txt file)
- #52842 (update comment)
- #52846 (Add timeout to use of `curl` in bootstrap.py.)
- #52851 (Make the tool_lints actually usable)
- #52853 (Improve bootstrap help on stages)
- #52859 (Use Vec::extend in SmallVec::extend when applicable)
- #52861 (Add targets for HermitCore (https://hermitcore.org) to the Rust compiler and port libstd to it.)
- #52867 (releases.md: fix 2 typos)
- #52870 (Implement Unpin for FutureObj and LocalFutureObj)
- #52876 (run-pass/const-endianness: negate before to_le())
- #52878 (Fix wrong issue number in the test name)
- #52883 (Include lifetime in mutability suggestion in NLL messages)
- #52888 (Use suggestions for shell format arguments)
- #52904 (NLL: sort diagnostics by span)
- #52905 (Fix a typo in unsize.rs)
- #52907 (NLL: On "cannot move out of type" error, print original before rewrite)
- #52914 (Only run the sparc-abi test on sparc)
- #52918 (Backport 1.27.2 release notes)
- #52929 (Update compatibility note for 1.28.0 to be correct)
Failed merges:
r? @ghost
Only run the sparc-abi test on sparc
It is not required for LLVM to have SPARC target support, so it is
necessary to only run this test when LLVM does support SPARC. Sadly, it
isn’t possible to specify exactly this constraint. Instead, we specify
that this test should run on SPARC host only (it surely is sane
assumption to make that compiler running on a SPARC can generate
SPARC, right?)
Since you cannot specify multiple `only-*` to have it run on both 32-bit
and 64-bit SPARC we pick 64-bit SPARC, because it is exactly what is
being tested by this test.
Fixes#52881
NLL: On "cannot move out of type" error, print original before rewrite
NLL: On "cannot move out of type" error, print original source before rewrite.
* Arguably this change is sometimes injecting noise into the output (namely in the cases where the suggested rewrite is inline with the suggestion and we end up highlighting the original source code). I would not be opposed to something more aggressive/dynamic, like revising the suggestion code to automatically print the original source when necessary (e.g. when the error does not have a span that includes the span of the suggestion).
* Also, as another note on this change: The doc comment for `Diagnostic::span_suggestion` says:
```rust
/// The message
///
/// * should not end in any punctuation (a `:` is added automatically)
/// * should not be a question
/// * should not contain any parts like "the following", "as shown"
```
* but the `:` is *not* added when the emitted line appears out-of-line relative to the suggestion. I find that to be an unfortunate UI experience.
----
As a drive-by fix, also changed code to combine multiple suggestions for a pattern into a single multipart suggestion (which vastly improves user experience IMO).
----
Includes the updates to expected NLL diagnostics.
Fix#52877
NLL: sort diagnostics by span
Sorting the output diagnostics by span is a long planned revision to the NLL diagnostics that we hope will yield a less surprising user experience in some case.
Once we got them buffered, it was trivial to implement. (The hard part is skimming the resulting changes to the diagnostics to make sure nothing broke... Note that I largely rubber-stamped the `#[rustc_regions]` output change.)
Fix#51167
Fix wrong issue number in the test name
I made a mistake in previous PR #52620, second issue number was wrong, changing from #52133 to #52113
r? @kennytm
run-pass/const-endianness: negate before to_le()
`const LE_I128` needs parentheses to negate the value *before* calling
`to_le()`, otherwise it doesn't match the operations performed in the
black-boxed part of the test. This only makes a tangible difference on
big-endian targets.
Make the tool_lints actually usable
cc #44690
Necessary for rust-lang-nursery/rust-clippy#2955 and rust-lang-nursery/rust-clippy#2977
This PR makes it possible for lint tools (at the moment only for Clippy) to implement the `tool_lints`, like it was documented in #52018.
Because the `declare_lint` macro is pretty cluttered right now, there was not really a good way to add the `tool_name` as an additional argument of the macro. That's why I chose to introduce the new `declare_tool_lint` macro.
The switch from `&str` to `String` in the `lint_groups` `FxHashMap` is because I got weird error messages in the `check_lint_name` method. And the `by_name` field of the `LintStore` also uses `String`.
### What comes with this PR:
If this PR lands and Clippy switches to the `tool_lints`, the currently used methods
```rust
#[cfg_attr(feature = "cargo-clippy", allow(clippy_lint))]
#[allow(unknown_lints, clippy_lint)]
```
to `allow`/`warn`/`deny`/`forbid` Clippy lints, won't have any effects anymore, but also won't produce a warning. That is because the name of `clippy_lint` will then be `clippy::clippy_lint`. (Maybe we can add a clippy lint to search for `cfg_attr` appearances with the `cargo-clippy` feature?)
r? @oli-obk
[NLL] Don't make "fake" match variables mutable
These variables can't be mutated by the user, but since they have names the unused-mut lint thinks that it should check them.
rustc: Disallow machine applicability in foreign macros
Recent changes to lints disallowed lints from being emitted against code located
in foreign macros, except for future-incompatible lints. For a future
incompatible lint, however, the automatic suggestions may not be applicable!
This commit updates this code path to force all applicability suggestions made
to foreign macros to never be `MachineApplicable`. This should avoid rustfix
actually attempting fixing these suggestions, causing non-compiling code to be
produced.
Closesrust-lang/cargo#5799
