Add `IntoIterator` for `Box<[T]>` + edition 2024-specific lints
* Adds a similar method probe opt-out mechanism to the `[T;N]: IntoIterator` implementation for edition 2021.
* Adjusts the relevant lints (shadowed `.into_iter()` calls, new source of method ambiguity).
* Adds some tests.
* Took the liberty to rework the logic in the `ARRAY_INTO_ITER` lint, since it was kind of confusing.
Based mostly off of #116607.
ACP: rust-lang/libs-team#263
References #59878
Tracking for Rust 2024: https://github.com/rust-lang/rust/issues/123759
Crater run was done here: https://github.com/rust-lang/rust/pull/116607#issuecomment-1770293013
Consensus afaict was that there is too much breakage, so let's do this in an edition-dependent way much like `[T; N]: IntoIterator`.
refactor: add rustc-perf submodule to src/tools
Currently, it's very challenging to perform a sandboxed `opt-dist`
bootstrap because the tool requires `rustc-perf` to be present, but
there is no proper management/tracking of it. Instead, a specific commit
is hardcoded where it is needed, and a non-checksummed zip is fetched
ad-hoc. This happens in two places:
`src/ci/docker/host-x86_64/dist-x86_64-linux/Dockerfile`:
```dockerfile
ENV PERF_COMMIT 4f313add609f43e928e98132358e8426ed3969ae
RUN curl -LS -o perf.zip https://ci-mirrors.rust-lang.org/rustc/rustc-perf-$PERF_COMMIT.zip && \
unzip perf.zip && \
mv rustc-perf-$PERF_COMMIT rustc-perf && \
rm perf.zip
```
`src/tools/opt-dist/src/main.rs`
```rust
// FIXME: add some mechanism for synchronization of this commit SHA with
// Linux (which builds rustc-perf in a Dockerfile)
// rustc-perf version from 2023-10-22
const PERF_COMMIT: &str = "4f313add609f43e928e98132358e8426ed3969ae";
let url = format!("https://ci-mirrors.rust-lang.org/rustc/rustc-perf-{PERF_COMMIT}.zip");
let client = reqwest::blocking::Client::builder()
.timeout(Duration::from_secs(60 * 2))
.connect_timeout(Duration::from_secs(60 * 2))
.build()?;
let response = retry_action(
|| Ok(client.get(&url).send()?.error_for_status()?.bytes()?.to_vec()),
"Download rustc-perf archive",
5,
)?;
```
This causes a few issues:
1. Maintainers need to be careful to bump PERF_COMMIT in both places
every time
2. In order to run `opt-dist` in a sandbox, you need to provide your own
`rustc-perf` (https://github.com/rust-lang/rust/pull/125125), but to
figure out which commit to provide you need to grep the Dockerfile
3. Even if you manage to provide the correct `rustc-perf`, its
dependencies are not included in the `vendor/` dir created during
`dist`, so it will fail to build from the published source tarballs
4. It is hard to provide any level of automation around updating the
`rustc-perf` in use, leading to staleness
Fundamentally, this means `rustc-src` tarballs no longer contain
everything you need to bootstrap Rust, and packagers hoping to leverage
`opt-dist` need to go out of their way to keep track of this "hidden"
dependency on `rustc-perf`.
This change adds rustc-perf as a git submodule, pinned to the current
`PERF_COMMIT` 4f313add609f43e928e98132358e8426ed3969ae. Subsequent
commits ensure the submodule is initialized when necessary, and make use
of it in `opt-dist`.
This replaces the hardcoded rustc-perf commit and ad-hoc downloading and
unpacking of its zipped source with defaulting to use the new rustc-perf
submodule.
While it would be nice to make `opt-dist` able to initialize the
submodule automatically when pointing to a Rust checkout _other_ than
the one opt-dist was built in, that would require a bigger refactor that
moved `update_submodule`, from bootstrap, into build_helper.
Regardless, I imagine it must be quite rare to use `opt-dist` with a
checkout that is neither from a rust-src tarball (which will contain the
submodule), nor the checkout opt-dist itself was built (bootstrap will
update the submodule when opt-dist is built).
Currently, it's very challenging to perform a sandboxed `opt-dist`
bootstrap because the tool requires `rustc-perf` to be present, but
there is no proper management/tracking of it. Instead, a specific commit
is hardcoded where it is needed, and a non-checksummed zip is fetched
ad-hoc. This happens in two places:
`src/ci/docker/host-x86_64/dist-x86_64-linux/Dockerfile`:
```dockerfile
ENV PERF_COMMIT 4f313add609f43e928e98132358e8426ed3969ae
RUN curl -LS -o perf.zip https://ci-mirrors.rust-lang.org/rustc/rustc-perf-$PERF_COMMIT.zip && \
unzip perf.zip && \
mv rustc-perf-$PERF_COMMIT rustc-perf && \
rm perf.zip
```
`src/tools/opt-dist/src/main.rs`
```rust
// FIXME: add some mechanism for synchronization of this commit SHA with
// Linux (which builds rustc-perf in a Dockerfile)
// rustc-perf version from 2023-10-22
const PERF_COMMIT: &str = "4f313add609f43e928e98132358e8426ed3969ae";
let url = format!("https://ci-mirrors.rust-lang.org/rustc/rustc-perf-{PERF_COMMIT}.zip");
let client = reqwest::blocking::Client::builder()
.timeout(Duration::from_secs(60 * 2))
.connect_timeout(Duration::from_secs(60 * 2))
.build()?;
let response = retry_action(
|| Ok(client.get(&url).send()?.error_for_status()?.bytes()?.to_vec()),
"Download rustc-perf archive",
5,
)?;
```
This causes a few issues:
1. Maintainers need to be careful to bump PERF_COMMIT in both places
every time
2. In order to run `opt-dist` in a sandbox, you need to provide your own
`rustc-perf` (https://github.com/rust-lang/rust/pull/125125), but to
figure out which commit to provide you need to grep the Dockerfile
3. Even if you manage to provide the correct `rustc-perf`, its
dependencies are not included in the `vendor/` dir created during
`dist`, so it will fail to build from the published source tarballs
4. It is hard to provide any level of automation around updating the
`rustc-perf` in use, leading to staleness
Fundamentally, this means `rustc-src` tarballs no longer contain
everything you need to bootstrap Rust, and packagers hoping to leverage
`opt-dist` need to go out of their way to keep track of this "hidden"
dependency on `rustc-perf`.
This change adds rustc-perf as a git submodule, pinned to the current
`PERF_COMMIT` 4f313add609f43e928e98132358e8426ed3969ae. Subsequent
commits ensure the submodule is initialized when necessary, and make use
of it in `opt-dist`.
chore: Remove repeated words (extension of #124924)
When I saw #124924 I thought "Hey, I'm sure that there are far more than just two typos of this nature in the codebase". So here's some more typo-fixing.
Some found with regex, some found with a spellchecker. Every single one manually reviewed by me (along with hundreds of false negatives by the tools)
Directly implement native exception raise methods in miri
This implements the `_Unwind_RaiseException` function used on pretty much every unix system for starting unwinding. This allows removing the miri special case from libpanic_unwind for unix.
Windows still needs `miri_start_unwind` as SEH unwinding isn't supported by miri. Unlike DWARF unwinding, SEH preserves all stack frames until right after the do_catch function has executed. Because of this panic_unwind stack allocates the exception object. Miri can't currently model unwinding without destroying stack frames and as such will report a use-after-free of the exception object.
Windows still needs the old custom ABI as SEH unwinding isn't supported
by miri. Unlike DWARF unwinding it preserves all stack frames until
right after the do_catch function has executed. Because of this
panic_unwind stack allocates the exception object. Miri can't currently
model unwinding without destroying stack frames and as such will report
a use-after-free of the exception object.
CI: fix toolstate publishing
Toolstate publishing after something broke was not working (discovered [here](https://github.com/rust-lang/rust/pull/124050#issuecomment-2111292015)). The toolstate env. vars should only be needed for the publishing step, so I moved them there.
The toolstate script is also being checked in `mingw-check` on PR and auto CI, but it doesn't really seem to do anything, and it shouldn't require the token.
Add tests for `-Zunpretty=expanded` ported from stringify's tests
This PR adds a new set of tests for the AST pretty-printer.
Previously, pretty-printer edge cases were tested by way of `stringify!` in [tests/ui/macros/stringify.rs](https://github.com/rust-lang/rust/blob/1.78.0/tests/ui/macros/stringify.rs), such as the tests added by 419b26931b and 527e2eac17.
Those tests will no longer provide effective coverage of the AST pretty-printer after #124141. `Nonterminal` and `TokenKind::Interpolated` are being removed, and a consequence is that `stringify!` will perform token stream pretty printing, instead of AST pretty printing, in all of the `stringify!` cases including $:expr and all other interpolations.
This PR adds 2 new ui tests with `compile-flags: -Zunpretty=expanded`:
- **tests/ui/unpretty/expanded-exhaustive.rs** — this test aims for exhaustive coverage of all the variants of `ExprKind`, `ItemKind`, `PatKind`, `StmtKind`, `TyKind`, and `VisibilityKind`. Some parts could use being fleshed out further, but the current state is roughly on par with what exists in the old stringify-based tests.
- **tests/ui/unpretty/expanded-interpolation.rs** — this test covers tricky macro metavariable edge cases that require the AST pretty printer to synthesize parentheses in order for the printed code to be valid Rust syntax.
r? `@nnethercote`
Rename Unsafe to Safety
Alternative to #124455, which is to just have one Safety enum to use everywhere, this opens the posibility of adding `ast::Safety::Safe` that's useful for unsafe extern blocks.
This leaves us today with:
```rust
enum ast::Safety {
Unsafe(Span),
Default,
// Safe (going to be added for unsafe extern blocks)
}
enum hir::Safety {
Unsafe,
Safe,
}
```
We would convert from `ast::Safety::Default` into the right Safety level according the context.
