Some tests fail on cross-compiled targets due to various linker problems
on cross-compiled target, and having test coverage for these against
cross-compiled targets is nice but not necessary.
This was implemented incorrectly during the porting process, where we
relied on std consts. However, `run-make-support` is a host-only
library, which meant that these artifact names were for the *host* and
not the *target*.
Polymorphize `array::IntoIter`'s iterator impl
Today we emit all the iterator methods for every different array width. That's wasteful since the actual array length never even comes into it -- the indices used are from the separate `alive: IndexRange` field, not even the `N` const param.
This PR switches things so that an `array::IntoIter<T, N>` stores a `PolymorphicIter<[MaybeUninit<T>; N]>`, which we *unsize* to `PolymorphicIter<[MaybeUninit<T>]>` and call methods on that non-`Sized` type for all the iterator methods.
That also necessarily makes the layout consistent between the different lengths of arrays, because of the unsizing. Compare that to today <https://rust.godbolt.org/z/Prb4xMPrb>, where different widths can't even be deduped because the offset to the indices is different for different array widths.
Rollup of 7 pull requests
Successful merges:
- #137835 (Use `BinOp::Cmp` for `iNN::signum`)
- #139584 (Avoid a reverse map that is only used in diagnostics paths)
- #139638 (Cleanup the `InstSimplify` MIR transformation)
- #139653 (Handle a negated literal in `eat_token_lit`.)
- #139662 (Tweak `DefPathData`)
- #139664 (Reuse address-space computation from global alloc)
- #139687 (Add spastorino to users_on_vacation)
r? `@ghost`
`@rustbot` modify labels: rollup
Avoid a reverse map that is only used in diagnostics paths
r? `@petrochenkov`
iterating a map until a value matches and returning the key is bad obviously, but it happens very rarely and only on diagnostics paths. It would also be a lot cheaper with https://github.com/rust-lang/rust/pull/138995. Which is actually why I'm trying this out, that PR adds a new entry in `create_def`, which makes `create_def` show up in cachegrind. So I'm trying out if removing adding an entry in `create_def` is a perf improvement
Use LTO to optimize Rust tools (cargo, miri, rustfmt, clippy, Rust Analyzer)
Trying if LTO/PGO can help RA's performance, and by how much. As `@Noratrieb` suggested, we could actually LTO optimize all the important tools.
CC `@Veykril` I realized that we don't even do LTO for Rust Analyzer, that could be a very low hanging fruit to improve its performance 😅
try-job: dist-x86_64-linux
LLVM_PROFILER_RT_LIB may be set to an absolute path (e.g., in Fedora builds),
but `-l` expects a library name, not a path. After #138273, this caused builds
to fail with a "could not find native static library" error.
This patch updates the build script to split the path into directory and
filename, using `cargo::rustc-link-search` for the directory and
`cargo::rustc-link-lib=+verbatim` for the file. This allows profiler_builtins to
correctly link the static library even when an absolute path is provided.
It is not enough to check if an expression type implements `Drop` to
determine whether it can have a significant side-effect.
Also, add tests for unchecked cases which were explicitly handled in the
code, such as checking for side effect in a `struct`'s fields, or in its
base expression.
Prepend temp files with per-invocation random string to avoid temp filename conflicts
https://github.com/rust-lang/rust/issues/139407 uncovered a very subtle unsoundness with incremental codegen, failing compilation sessions (due to assembler errors), and the "prefer hard linking over copying files" strategy we use in the compiler for file management.
Specifically, imagine we're building a single file 3 times, all with `-Csave-temps -Cincremental=...`. Let's call the object file we're building for the codegen unit for `main` "`XXX.o`" just for clarity since it's probably some gigantic hash name:
```
#[inline(never)]
#[cfg(any(rpass1, rpass3))]
fn a() -> i32 {
0
}
#[cfg(any(cfail2))]
fn a() -> i32 {
1
}
fn main() {
evil::evil();
assert_eq!(a(), 0);
}
mod evil {
#[cfg(any(rpass1, rpass3))]
pub fn evil() {
unsafe {
std::arch::asm!("/* */");
}
}
#[cfg(any(cfail2))]
pub fn evil() {
unsafe {
std::arch::asm!("missing");
}
}
}
```
Session 1 (`rpass1`):
* Type-check, borrow-check, etc.
* Serialize the dep graph to the incremental working directory `.../s-...-working/`.
* Codegen object file to a temp file `XXX.rcgu.o` which is spit out in the cwd.
* Hard-link[^1] `XXX.rcgu.o` to the incremental working directory `.../s-...-working/XXX.o`.
* Save-temps option means we don't delete `XXX.rgcu.o`.
* Link the binary and stuff.
* Finalize[^2] the working incremental session by renaming `.../s-...-working` to ` s-...-asjkdhsjakd` (some other finalized incr comp session dir name).
Session 2 (`cfail2`):
* Load artifacts from the previous *finalized* incremental session, namely the dep graph.
* Type-check, borrow-check, etc. since the file has changed, so most dep graph nodes are red.
* Serialize the dep graph to the incremental working directory `.../s-...-working/`.
* Codegen object file to a temp file `XXX.rcgu.o`. **HERE IS THE PROBLEM**: The hard-link is still set up to point to the inode from `XXX.o` from the first session, so this also modifies the `XXX.o` in the previous finalized session directory.
* Codegen emits an error b/c `missing` is not an instruction, so we abort before finalizing the incremental session. Specifically, this means that the *previous* session is the last finalized session.
Session 3 (`rpass3`):
* Load artifacts from the previous *finalized* incremental session, namely the dep graph. NOTE that this is from session 1.
* All the dep graph nodes are green since we are basically replaying session 1.
* codegen object file `XXX.o`, which is detected as *reused* from session 1 since dep nodes were green. That means we **reuse** `XXX.o` which had been dirtied from session 2.
* Link the binary and stuff.
This results in a binary which reuses some of the build artifacts from session 2, but thinks it's from session 1.
At this point, I hope it's clear to see that the incremental results from session 1 were dirtied from session 2, but we reuse them as if session 1 was the previous (finalized) incremental session we ran. This is at best really buggy, and at worst **unsound**.
This isn't limited to `-C save-temps`, since there are other combinations of flags that may keep around temporary files (hard linked) in the working directory (like `-C debuginfo=1 -C split-debuginfo=unpacked` on darwin, for example).
---
This PR implements a fix which is to prepend temp filenames with a random string that is generated per invocation of rustc. This string is not *deterministic*, but temporary files are transient anyways, so I don't believe this is a problem.
That means that temp files are now something like... `{crate-name}.{cgu}.{invocation_temp}.rcgu.o`, where `{invocation_temp}` is the new temporary string we generate per invocation of rustc.
Fixes https://github.com/rust-lang/rust/issues/139407
[^1]: 175dcc7773/compiler/rustc_fs_util/src/lib.rs (L60)
[^2]: 175dcc7773/compiler/rustc_incremental/src/persist/fs.rs (L1-L40)
Prepend temp files with per-invocation random string to avoid temp filename conflicts
https://github.com/rust-lang/rust/issues/139407 uncovered a very subtle unsoundness with incremental codegen, failing compilation sessions (due to assembler errors), and the "prefer hard linking over copying files" strategy we use in the compiler for file management.
Specifically, imagine we're building a single file 3 times, all with `-Csave-temps -Cincremental=...`. Let's call the object file we're building for the codegen unit for `main` "`XXX.o`" just for clarity since it's probably some gigantic hash name:
```
#[inline(never)]
#[cfg(any(rpass1, rpass3))]
fn a() -> i32 {
0
}
#[cfg(any(cfail2))]
fn a() -> i32 {
1
}
fn main() {
evil::evil();
assert_eq!(a(), 0);
}
mod evil {
#[cfg(any(rpass1, rpass3))]
pub fn evil() {
unsafe {
std::arch::asm!("/* */");
}
}
#[cfg(any(cfail2))]
pub fn evil() {
unsafe {
std::arch::asm!("missing");
}
}
}
```
Session 1 (`rpass1`):
* Type-check, borrow-check, etc.
* Serialize the dep graph to the incremental working directory `.../s-...-working/`.
* Codegen object file to a temp file `XXX.rcgu.o` which is spit out in the cwd.
* Hard-link[^1] `XXX.rcgu.o` to the incremental working directory `.../s-...-working/XXX.o`.
* Save-temps option means we don't delete `XXX.rgcu.o`.
* Link the binary and stuff.
* Finalize[^2] the working incremental session by renaming `.../s-...-working` to ` s-...-asjkdhsjakd` (some other finalized incr comp session dir name).
Session 2 (`cfail2`):
* Load artifacts from the previous *finalized* incremental session, namely the dep graph.
* Type-check, borrow-check, etc. since the file has changed, so most dep graph nodes are red.
* Serialize the dep graph to the incremental working directory `.../s-...-working/`.
* Codegen object file to a temp file `XXX.rcgu.o`. **HERE IS THE PROBLEM**: The hard-link is still set up to point to the inode from `XXX.o` from the first session, so this also modifies the `XXX.o` in the previous finalized session directory.
* Codegen emits an error b/c `missing` is not an instruction, so we abort before finalizing the incremental session. Specifically, this means that the *previous* session is the last finalized session.
Session 3 (`rpass3`):
* Load artifacts from the previous *finalized* incremental session, namely the dep graph. NOTE that this is from session 1.
* All the dep graph nodes are green since we are basically replaying session 1.
* codegen object file `XXX.o`, which is detected as *reused* from session 1 since dep nodes were green. That means we **reuse** `XXX.o` which had been dirtied from session 2.
* Link the binary and stuff.
This results in a binary which reuses some of the build artifacts from session 2, but thinks it's from session 1.
At this point, I hope it's clear to see that the incremental results from session 1 were dirtied from session 2, but we reuse them as if session 1 was the previous (finalized) incremental session we ran. This is at best really buggy, and at worst **unsound**.
This isn't limited to `-C save-temps`, since there are other combinations of flags that may keep around temporary files (hard linked) in the working directory (like `-C debuginfo=1 -C split-debuginfo=unpacked` on darwin, for example).
---
This PR implements a fix which is to prepend temp filenames with a random string that is generated per invocation of rustc. This string is not *deterministic*, but temporary files are transient anyways, so I don't believe this is a problem.
That means that temp files are now something like... `{crate-name}.{cgu}.{invocation_temp}.rcgu.o`, where `{invocation_temp}` is the new temporary string we generate per invocation of rustc.
Fixes https://github.com/rust-lang/rust/issues/139407
[^1]: 175dcc7773/compiler/rustc_fs_util/src/lib.rs (L60)
[^2]: 175dcc7773/compiler/rustc_incremental/src/persist/fs.rs (L1-L40)
