remove FIXME(#13101) since `assert_receiver_is_total_eq` stays.
remove FIXME(#19649) now that stability markers render.
remove FIXME(#13642) now the benchmarks were moved.
remove FIXME(#6220) now that floating points can be formatted.
remove FIXME(#18248) and write tests for `Rc<str>` and `Rc<[u8]>`
remove reference to irelevent issues in FIXME(#1697, #2178...)
update FIXME(#5516) to point to getopts issue 7
update FIXME(#7771) to point to RFC 628
update FIXME(#19839) to point to issue 26925
First step toward implementing impl Trait in argument position
First step implementing #44721.
Add a flag to hir and ty TypeParameterDef and raise an error when using
explicit type parameters when calling a function using impl Trait in
argument position.
I don't know if there is a procedure to add an error code so I just took an available code. Is that ok ?
r? @nikomatsakis
rustc: Default 32 codegen units at O0
This commit changes the default of rustc to use 32 codegen units when compiling
in debug mode, typically an opt-level=0 compilation. Since their inception
codegen units have matured quite a bit, gaining features such as:
* Parallel translation and codegen enabling codegen units to get worked on even
more quickly.
* Deterministic and reliable partitioning through the same infrastructure as
incremental compilation.
* Global rate limiting through the `jobserver` crate to avoid overloading the
system.
The largest benefit of codegen units has forever been faster compilation through
parallel processing of modules on the LLVM side of things, using all the cores
available on build machines that typically have many available. Some downsides
have been fixed through the features above, but the major downside remaining is
that using codegen units reduces opportunities for inlining and optimization.
This, however, doesn't matter much during debug builds!
In this commit the default number of codegen units for debug builds has been
raised from 1 to 32. This should enable most `cargo build` compiles that are
bottlenecked on translation and/or code generation to immediately see speedups
through parallelization on available cores.
Work is being done to *always* enable multiple codegen units (and therefore
parallel codegen) but it requires #44841 at least to be landed and stabilized,
but stay tuned if you're interested in that aspect!
Point at signature on unused lint
```
warning: struct is never used: `Struct`
--> $DIR/unused-warning-point-at-signature.rs:22:1
|
22 | struct Struct {
| ^^^^^^^^^^^^^
```
Fix#33961.
Point at parameter type on E0301
On "the parameter type `T` may not live long enough" error, point to the
parameter type suggesting lifetime bindings:
```
error[E0310]: the parameter type `T` may not live long enough
--> $DIR/lifetime-doesnt-live-long-enough.rs:28:5
|
27 | struct Foo<T> {
| - help: consider adding an explicit lifetime bound `T: 'static`...
28 | foo: &'static T
| ^^^^^^^^^^^^^^^
|
note: ...so that the reference type `&'static T` does not outlive the data it points at
--> $DIR/lifetime-doesnt-live-long-enough.rs:28:5
|
28 | foo: &'static T
| ^^^^^^^^^^^^^^^
```
Fix#36700.
Initial support for `..=` syntax
#28237
This PR adds `..=` as a synonym for `...` in patterns and expressions.
Since `...` in expressions was never stable, we now issue a warning.
cc @durka
r? @aturon
Allow unused extern crate again
This is a partial revert of #42588. There is a usability concern reported in #44294 that was not considered in the discussion of the PR, so I would like to back this out of 1.21. As is, I think users would have a worse and more confusing experience with this lint enabled by default. We can re-enabled once there are better diagnostics or the case in #44294 does not trigger the lint.
use param_env on the trait_cache key
We bailed from making trans_fulfill_obligation return `Option` or `Result`, just made it less prone to crashing outside trans
r? @nikomatsakis
Add a flag to hir and ty TypeParameterDef and raise an error when using
explicit type parameters when calling a function using impl Trait in
argument position.
This commit changes the default of rustc to use 32 codegen units when compiling
in debug mode, typically an opt-level=0 compilation. Since their inception
codegen units have matured quite a bit, gaining features such as:
* Parallel translation and codegen enabling codegen units to get worked on even
more quickly.
* Deterministic and reliable partitioning through the same infrastructure as
incremental compilation.
* Global rate limiting through the `jobserver` crate to avoid overloading the
system.
The largest benefit of codegen units has forever been faster compilation through
parallel processing of modules on the LLVM side of things, using all the cores
available on build machines that typically have many available. Some downsides
have been fixed through the features above, but the major downside remaining is
that using codegen units reduces opportunities for inlining and optimization.
This, however, doesn't matter much during debug builds!
In this commit the default number of codegen units for debug builds has been
raised from 1 to 32. This should enable most `cargo build` compiles that are
bottlenecked on translation and/or code generation to immediately see speedups
through parallelization on available cores.
Work is being done to *always* enable multiple codegen units (and therefore
parallel codegen) but it requires #44841 at least to be landed and stabilized,
but stay tuned if you're interested in that aspect!
Require rlibs for dependent crates when linking static executables
This handles the case for `CrateTypeExecutable` and `+crt_static`. I reworked the match block to avoid duplicating the `attempt_static` and error checking code again (this case would have been a copy of the `CrateTypeCdylib`/`CrateTypeStaticlib` case).
On `linux-musl` targets where `std` was built with `crt_static = false` in `config.toml`, this change brings the test suite from entirely failing to mostly passing.
This change should not affect behavior for other crate types, or for targets which do not respect `+crt_static`.
encode region::Scope using fewer bytes
Now that region::Scope is no longer interned, its size is more important. This PR encodes region::Scope in 8 bytes instead of 12, which should speed up region inference somewhat (perf testing needed) and should improve the margins on #36799 by 64MB (that's not a lot, I did this PR mostly to speed up region inference).
This is a perf-sensitive PR. Please don't roll me up.
r? @eddyb
This is based on #44743 so I could get more accurate measurements on #36799.
This is a partial revert of #42588. There is a usability concern
reported in #44294 that was not considered in the discussion of the PR,
so I would like to back this out of 1.21. As is, I think users would
have a worse and more confusing experience with this lint enabled by
default. We can re-enabled once there are better diagnostics or the case
in #44294 does not trigger the lint.
Move effect-checking to MIR
This allows emitting lints from MIR and moves the effect-checking pass to work on it.
I'll make `repr(packed)` misuse unsafe in a separate PR.
r? @eddyb
put empty generic lists behind a pointer
This reduces the size of hir::Expr from 128 to 88 bytes (!) and shaves
200MB out of #36799.
This is a performance-sensitive PR so please don't roll it up.
r? @eddyb
On "the parameter type `T` may not live long enough" error, point to the
parameter type suggesting lifetime bindings:
```
error[E0310]: the parameter type `T` may not live long enough
--> $DIR/lifetime-doesnt-live-long-enough.rs:28:5
|
27 | struct Foo<T> {
| - help: consider adding an explicit lifetime bound `T: 'static`...
28 | foo: &'static T
| ^^^^^^^^^^^^^^^
|
note: ...so that the reference type `&'static T` does not outlive the data it points at
--> $DIR/lifetime-doesnt-live-long-enough.rs:28:5
|
28 | foo: &'static T
| ^^^^^^^^^^^^^^^
```
Now that region::Scope is no longer interned, its size is more
important. This PR encodes region::Scope in 8 bytes instead of 12, which
should speed up region inference somewhat (perf testing needed) and
should improve the margins on #36799 by 64MB (that's not a lot, I did
this PR mostly to speed up region inference).
Record semantic types for all syntactic types in bodies
... and use recorded types in type privacy checking (types are recorded after inference, so there are no `_`s left).
Also use `hir_ty_to_ty` for types in signatures in type privacy checking.
This could also be potentially useful for save-analysis and diagnostics.
Fixes https://github.com/rust-lang/rust/pull/42125#issuecomment-305987755
r? @eddyb
rustc: Don't use DelimToken::None if possible
This commit fixes a regression from #44601 where lowering attribute to HIR now
involves expanding interpolated tokens to their actual tokens. In that commit
all interpolated tokens were surrounded with a `DelimToken::None` group of
tokens, but this ended up causing regressions like #44730 where the various
attribute parsers in `syntax/attr.rs` weren't ready to cope with
`DelimToken::None`. Instead of fixing the parser in `attr.rs` this commit
instead opts to just avoid the `DelimToken::None` in the first place, ensuring
that the token stream should look the same as it did before where possible.
Closes#44730
Make `-Z borrowck-mir` imply that `EndRegion`'s should be emitted.
Before this change, the `-Z borrowck-mir` flag is useless if you do not also pass `-Z emit-end-regions`.
So, in the same spirit as f2892ad281, make `-Z borrowck-mir` also emit `EndRegion` statements. (This will hopefully avoid some initial speed bumps for new-comers helping out with NLL.)
Add ..= to the parser
Add ..= to libproc_macro
Add ..= to ICH
Highlight ..= in rustdoc
Update impl Debug for RangeInclusive to ..=
Replace `...` to `..=` in range docs
Make the dotdoteq warning point to the ...
Add warning for ... in expressions
Updated more tests to the ..= syntax
Updated even more tests to the ..= syntax
Updated the inclusive_range entry in unstable book
