mention lint group in default level lint note
### Summary
This PR updates lint diagnostics so that default-level notes now mention the lint group they belong to, if any.
Fixes: rust-lang/rust#65464.
### Example
```rust
fn main() {
let x = 5;
}
```
Before:
```
= note: `#[warn(unused_variables)]` on by default
```
After:
```
= note: `#[warn(unused_variables)]` (part of `#[warn(unused)]`) on by default
```
### Unchanged Cases
Messages remain the same when the lint level is explicitly set, e.g.:
* Attribute on the lint `#[warn(unused_variables)]`:
```
note: the lint level is defined here
LL | #[warn(unused_variables)]
| ^^^^^^^^^^^^^^^^
```
* Attribute on the group `#[warn(unused)]:`:
```
= note: `#[warn(unused_variables)]` implied by `#[warn(unused)]`
```
* CLI option `-W unused`:
```
= note: `-W unused-variables` implied by `-W unused`
= help: to override `-W unused` add `#[allow(unused_variables)]`
```
* CLI option `-W unused-variables`:
```
= note: requested on the command line with `-W unused-variables`
```
ignore head usages from ignored candidates
Fixes https://github.com/rust-lang/trait-system-refactor-initiative/issues/210. The test now takes 0.8s to compile, which seems good enough to me. We are actually still walking the entire graph here, we're just avoiding unnecessary reruns.
The basic idea is that if we've only accessed a cycle head inside of a candidate which didn't impact the final result of our goal, we don't need to rerun that cycle head even if is the used provisional result differs from the final result.
We also use this information when rebasing goals over their cycle heads. If a goal doesn't actually depend on the result of that cycle head, rebasing always succeeds. However, we still need to make sure we track the fact that we relied on the cycle head at all to avoid query instability.
It is implemented by tracking the number of `HeadUsages` for every head while evaluating goals. We then also track the head usages while evaluating a single candidate, which the search graph returns as `CandidateHeadUsages`. If there is now an always applicable candidate candidate we know that all other candidates with that source did not matter. We then call `fn ignore_candidate_head_usages` to remove the usages while evaluating this single candidate from the total. If the final `HeadUsages` end up empty, we know that the result of this cycle head did not matter when evaluating its nested goals.
`tests/ui/issues/`: The Issues Strike Back [4/N]
Some `tests/ui/issues/` housekeeping, to trim down number of tests directly under `tests/ui/issues/`. Part of https://github.com/rust-lang/rust/issues/133895.
r? ````````@jieyouxu````````
Account for bare tuples and `Pin` methods in field searching logic
When looking for the field names and types of a given type, account for tuples. This allows suggestions for incorrectly nested field accesses and field name typos to trigger as intended. Previously these suggestions only worked on `ty::Adt`, including tuple structs which are no different to tuples, so they should behave the same in suggestions.
When suggesting field access which would encounter a method not found, do not suggest pinning when those methods are on `impl Pin` itself.
```
error[E0599]: no method named `get_ref` found for tuple `(BufReader<File>,)` in the current scope
--> $DIR/missing-field-access.rs:11:15
|
LL | let x = f.get_ref();
| ^^^^^^^ method not found in `(BufReader<File>,)`
|
help: one of the expressions' fields has a method of the same name
|
LL | let x = f.0.get_ref();
| ++
```
instead of
```
error[E0599]: no method named `get_ref` found for tuple `(BufReader<File>,)` in the current scope
--> $DIR/missing-field-access.rs:11:15
|
LL | let x = f.get_ref();
| ^^^^^^^ method not found in `(BufReader<File>,)`
|
help: consider pinning the expression
|
LL ~ let mut pinned = std::pin::pin!(f);
LL ~ let x = pinned.as_ref().get_ref();
|
```
Fixrust-lang/rust#144602.
Use `tcx.short_string()` in more diagnostics
`TyCtxt::short_string` ensures that user visible type paths aren't overwhelming on the terminal output, and properly saves the long name to disk as a side-channel. We already use these throughout the compiler and have been using them as needed when users find cases where the output is verbose. This is a proactive search of some cases to use `short_string`.
We add support for shortening the path of "trait path only".
Every manual use of `short_string` is a bright marker that that error should be using structured diagnostics instead (as they have proper handling of long types without the maintainer having to think abou tthem).
`tests/ui/issues/`: The Issues Strike Back [3/N]
Some `tests/ui/issues/` housekeeping, to trim down number of tests directly under `tests/ui/issues/`. Part of https://github.com/rust-lang/rust/issues/133895.
r? ```@jieyouxu```
When looking for the field names and types of a given type, account for tuples. This allows suggestions for incorrectly nested field accesses and field name typos to trigger as intended. Previously these suggestions only worked on `ty::Adt`, including tuple structs which are no different to tuples, so they should behave the same in suggestions.
```
error[E0599]: no method named `get_ref` found for tuple `(BufReader<File>,)` in the current scope
--> $DIR/missing-field-access.rs:11:15
|
LL | let x = f.get_ref();
| ^^^^^^^ method not found in `(BufReader<File>,)`
|
help: one of the expressions' fields has a method of the same name
|
LL | let x = f.0.get_ref();
| ++
```
`TyCtxt::short_string` ensures that user visible type paths aren't overwhelming on the terminal output, and properly saves the long name to disk as a side-channel. We already use these throughout the compiler and have been using them as needed when users find cases where the output is verbose. This is a proactive search of some cases to use `short_string`.
We add support for shortening the path of "trait path only".
Every manual use of `short_string` is a bright marker that that error should be using structured diagnostics instead (as they have proper handling of long types without the maintainer having to think abou tthem).
When we don't actually print out a shortened type we don't need the "use `--verbose`" note.
On E0599 show type identity to avoid expanding the receiver's generic parameters.
Unify wording on `long_ty_path` everywhere.
Tweak auto trait errors
Make suggestions to remove params and super traits verbose and make spans more accurate.
```
error[E0567]: auto traits cannot have generic parameters
--> $DIR/auto-trait-validation.rs:6:19
|
LL | auto trait Generic<T> {}
| -------^^^
| |
| auto trait cannot have generic parameters
error[E0568]: auto traits cannot have super traits or lifetime bounds
--> $DIR/auto-trait-validation.rs:8:20
|
LL | auto trait Bound : Copy {}
| ----- ^^^^
| |
| auto traits cannot have super traits or lifetime bounds
```
```
error[E0380]: auto traits cannot have associated items
--> $DIR/issue-23080.rs:5:8
|
LL | unsafe auto trait Trait {
| ----- auto traits cannot have associated items
LL | fn method(&self) {
| ^^^^^^
```
Rehome 33 `tests/ui/issues/` tests to other subdirectories under `tests/ui/`
rust-lang/rust#143902 divided into smaller, easier to review chunks.
Part of rust-lang/rust#133895
Methodology:
1. Refer to the previously written `tests/ui/SUMMARY.md`
2. Find an appropriate category for the test, using the original issue thread and the test contents.
3. Add the issue URL at the bottom (not at the top, as that would mess up stderr line numbers)
4. Rename the tests to make their purpose clearer
Inspired by the methodology that ``@Kivooeo`` was using.
r? ``@jieyouxu``
fix: Error on illegal `[const]`s inside blocks within legal positions
Fixesrust-lang/rust#132067
I initially considered moving `[const]` validations to `rustc_ast_lowering`, but that approach would require adding constness information to `AssocCtxt`, which introduces significant changes - especially within `rustc_expand` - just to support a single use case here:
3fb1b53a9d/compiler/rustc_ast_passes/src/ast_validation.rs (L1596-L1610)
Instead, I believe it's sufficient to simply "reset" `[const]` allowness whenever we enter a new block.
Make suggestions to remove params and super traits tool-only, and make
the suggestion span more accurate.
```
error[E0567]: auto traits cannot have generic parameters
--> $DIR/auto-trait-validation.rs:6:19
|
LL | auto trait Generic<T> {}
| -------^^^
| |
| auto trait cannot have generic parameters
error[E0568]: auto traits cannot have super traits or lifetime bounds
--> $DIR/auto-trait-validation.rs:8:20
|
LL | auto trait Bound : Copy {}
| ----- ^^^^
| |
| auto traits cannot have super traits or lifetime bounds
```
```
error[E0380]: auto traits cannot have associated items
--> $DIR/issue-23080.rs:5:8
|
LL | unsafe auto trait Trait {
| ----- auto traits cannot have associated items
LL | fn method(&self) {
| ^^^^^^
```
`tests/ui/issues/`: The Issues Strike Back [2/N]
Some `tests/ui/issues/` housekeeping, to trim down number of tests directly under `tests/ui/issues/`. Part of https://github.com/rust-lang/rust/issues/133895.
r? ``@jieyouxu``
uniquify root goals during HIR typeck
We need to rely on region identity to deal with hangs such as https://github.com/rust-lang/trait-system-refactor-initiative/issues/210 and to keep the current behavior of `fn try_merge_responses`.
This is a problem as borrowck starts by replacing each *occurrence* of a region with a unique inference variable. This frequently splits a single region during HIR typeck into multiple distinct regions. As we assume goals to always succeed during borrowck, relying on two occurances of a region being identical during HIR typeck causes ICE. See the now fixed examples in https://github.com/rust-lang/trait-system-refactor-initiative/issues/27 and rust-lang/rust#139409.
We've previously tried to avoid this issue by always *uniquifying* regions when canonicalizing goals. This prevents caching subtrees during canonicalization which resulted in hangs for very large types. People rely on such types in practice, which caused us to revert our attempt to reinstate `#[type_length_limit]` in https://github.com/rust-lang/rust/pull/127670. The complete list of changes here:
- rust-lang/rust#107981
- rust-lang/rust#110180
- rust-lang/rust#114117
- rust-lang/rust#130821
After more consideration, all occurrences of such large types need to happen outside of typeck/borrowck. We know this as we already walk over all types in the MIR body when replacing their regions with nll vars.
This PR therefore enables us to rely on region identity inside of the trait solver by exclusively **uniquifying root goals during HIR typeck**. These are the only goals we assume to hold during borrowck. This is insufficient as type inference variables may "hide" regions we later uniquify. Because of this, we now stash proven goals which depend on inference variables in HIR typeck and reprove them after writeback. This closes https://github.com/rust-lang/trait-system-refactor-initiative/issues/127.
This was originally part of rust-lang/rust#144258 but I've moved it into a separate PR. While I believe we need to rely on region identity to fix the performance issues in some way, I don't know whether rust-lang/rust#144258 is the best approach to actually do so. Regardless of how we deal with the hangs however, this change is necessary and desirable regardless.
r? `@compiler-errors` or `@BoxyUwU`
Adds the equivalent `nonpoison` types to the `poison::mutex` module.
These types and implementations are gated under the `nonpoison_mutex`
feature gate.
Also blesses the ui tests that now have a name conflicts (because these
types no longer have unique names). The full path distinguishes the
different types.
Co-authored-by: Aandreba <aandreba@gmail.com>
Co-authored-by: Trevor Gross <tmgross@umich.edu>
`tests/ui/issues/`: The Issues Strike Back [1/N]
I believe I’ve finally brought [my program](https://github.com/Kivooeo/test-manager) to life -- it now handles multiple test moves in one go: plain moves first, then a gentle touch on each file depends on given options. The process should be much smoother now.
Of course, I won’t rush through everything in a few days -- that would be unkind to `@Oneirical.` I’ll pace myself. And also I can't have more than one such PR because `issues.txt` will conflict with previous parts after merging them which is not fun as well.
This PR is just that: first commit - moves; second - regression comments and the occasional .stderr reblesses, also issue.txt and tidy changes. Nothing special, but progress nonetheless. This is for the purpose of preserving test file history during restructuring
Part of https://github.com/rust-lang/rust/issues/133895.
r? `@jieyouxu`
Stop compilation early if macro expansion failed
Fixesrust-lang/rust#116180.
So there isn't really a type that is central for macro expansion and some errors are actually emitted (because the resolution happens after the expansion I suppose) after the expansion pass (like "not found macro"). Sometimes, errors are only emitted on the second "try" (to improve error output). So I couldn't reach a similar solution than what was done in https://github.com/rust-lang/rust/pull/133937 and suggested by ````@estebank```` in https://github.com/rust-lang/rust/issues/116180#issuecomment-3109468922. But maybe I missed something?
So in the end, I realized that there is method called every time (except one, described below) a macro error is actually emitted: `ExtCtxt::trace_macros_diag`. Considering I updated what it did, I renamed it into `macro_error_and_trace_macros_diag` to better reflect it.
There is only one call of `trace_macros_diag` which isn't reporting an error but just used for `macro_trace` feature, so I kept it as is.
r? ````@oli-obk````
