Replace RPITIT current impl with new strategy that lowers as a GAT
This PR replaces the current implementation of RPITITs with the new implementation that we had under -Zlower-impl-trait-in-trait-to-assoc-ty flag that lowers the RPIT as a GAT on the trait and on the impls that implement that trait.
Opening this PR as a draft because this goes after #112682, ~#112981~ and ~#112983~.
As soon as those are merged, I can rebase and we should run perf, crater and test a lot.
r? `@compiler-errors`
move pal cfgs in f32 and f64 to sys
I'd like to push forward on `sys` being a separate crate. To start with, most of these PAL exception cases are very simple little bits of code like this, so I thought I would try tidying them up.
Copy stage0 `rustc` binaries to `stage0-sysroot`
This is basically a revival of https://github.com/rust-lang/rust/pull/101711 and https://github.com/rust-lang/rust/pull/107956, with an added check that the full sysroot will only be created if the original rustc comes from `stage0/bin`.
What is/should be tested:
- [x] `rustup toolchain link stage0` (new libstd is used correctly)
- [x] `python3 x.py fmt dist --stage 0`
- [x] Custom rustc/cargo in `config.toml` (in this case this logic is ignored)
- [x] Perfbot (try perf run has succeeded)
- [x] Real use case (https://github.com/rust-lang/backtrace-rs/pull/542)
(Hopefully) fixes: https://github.com/rust-lang/rust/issues/101691
This is not the "end all, be all" solution to this problem, but as long as it resolves the basic use-case, and doesn't break perfbot, I say ship it. This code will probably be nuked anyway Soon™ because of the stage redesign.
Add Tests for native wasm exceptions
### Motivation
In PR #111322, I added support for native WASM exceptions. I was asked by ``@davidtwco`` to add some tests for it in a follow up PR, which seems like a very good idea.
This PR adds three tests for this feature:
* codegen: ensure the correct LLVM instructions are used
* assembly: ensure the correct WASM instructions are used
* run-make: ensure the exception handling works; the WASM code is run using a small nodejs script which demonstrates the exception handling
### Complications
There are a few changes beside adding the tests, which were necessary
* Tests for the wasm32-unknown-unknown target are (as far as I know) only run on `test-various`. Its docker image uses nodejs-15, which is very old. Experimental support for wasm-exceptions was added in nodejs16. In nodejs 18.12 (LTS), they are stable.
- --> increase nodejs to 18.12 in `test-various`
* codegen/assembly tests are not performed for the wasm32-unknown-unknown target yet
- --> add those to `test-various` as well
Due to the last point, some tests are run which have not run before (assembly+codegen tests for wasm32-unknown-unknown). I added `// ignore wasm32-bare` for those which failed
### Local testing
I run all tests locally using both `test-various` and `wasm32`. As far as I know, none of the other systems run any test for wasm32 targets.
Update debuginfo test runner to provide more useful output
This change makes debuginfo tests more user friendly. Changes:
- Print all lines that fail to match the patterns instead of just the first
- Provide better error messages that also say what did match
- Strip leading whitespace from directives so they are not skipped if indented
- Improve documentation and improve nesting on some related items
As an example, given the following intentional fail (and a few not shown):
```rust
// from tests/debuginfo/rc_arc.rs
// cdb-command:dx rc,d
// cdb-check:rc,d : 111 [Type: alloc::rc::Rc<i32>]
// cdb-check: [Reference count] : 11 [Type: core::cell FAIL::Cell<usize>]
// cdb-check: [Weak reference count] : 2 [Type: core::cell FAIL::Cell<usize>]
```
The current output (tested in #113313) will show:
```
2023-07-04T08:10:00.1939267Z ---- [debuginfo-cdb] tests\debuginfo\rc_arc.rs stdout ----
2023-07-04T08:10:00.1942182Z
2023-07-04T08:10:00.1957463Z error: line not found in debugger output: [Reference count] : 11 [Type: core:: cell FAIL::Cell<usize>]
2023-07-04T08:10:00.1958272Z status: exit code: 0
```
With this chane, you are able to see all failures in that check group, as well as what parts were successful. The output is now:
```
2023-07-04T09:45:57.2514224Z error: check directive(s) from `C:\a\rust\rust\tests\debuginfo\rc_arc.rs` not found in debugger output. errors:
2023-07-04T09:45:57.2514631Z (rc_arc.rs:31) ` [Reference count] : 11 [Type: core::cell FAIL::Cell<usize>]`
2023-07-04T09:45:57.2514908Z (rc_arc.rs:32) ` [Weak reference count] : 2 [Type: core::cell FAIL::Cell<usize>]`
2023-07-04T09:45:57.2515181Z (rc_arc.rs:41) ` [Reference count] : 21 [Type: core::sync::atomic FAIL::AtomicUsize]`
2023-07-04T09:45:57.2515452Z (rc_arc.rs:50) `dyn_rc,d [Type: alloc::rc::Rc<dyn$<core::fmt FAIL::Debug> >]`
2023-07-04T09:45:57.2515695Z the following subset of check directive(s) was found successfully::
2023-07-04T09:45:57.2516080Z (rc_arc.rs:30) `rc,d : 111 [Type: alloc::rc::Rc<i32>]`
2023-07-04T09:45:57.2516312Z (rc_arc.rs:35) `weak_rc,d : 111 [Type: alloc::rc::Weak<i32>]`
2023-07-04T09:45:57.2516555Z (rc_arc.rs:36) ` [Reference count] : 11 [Type: core::cell::Cell<usize>]`
2023-07-04T09:45:57.2516881Z (rc_arc.rs:37) ` [Weak reference count] : 2 [Type: core::cell::Cell<usize>]`
...
```
Which makes it easier to see what did and didn't succeed without manual comparison against the source test file.
Port PGO/LTO/BOLT optimized build pipeline to Rust
This PR ports the `stage-build.py` PGO/LTO/BOLT optimization script from Python to Rust, to make it easier to use dependencies, and make it a bit more robust. The PR switches both the Linux and Windows dist runners to the Rust script and removes the old Python script.
Funnily enough, the Rust port has less lines of code than the Python script :) I think that clearly shows that the Python script really lacked dependencies.
Rollup of 7 pull requests
Successful merges:
- #112931 (Enable zlib in LLVM on aarch64-apple-darwin)
- #113158 (tests: unset `RUSTC_LOG_COLOR` in a test)
- #113173 (CI: include workflow name in concurrency group)
- #113335 (Reveal opaques in new solver)
- #113390 (CGU formation tweaks)
- #113399 (Structurally normalize again for byte string lit pat checking)
- #113412 (Add basic types to SMIR)
r? `@ghost`
`@rustbot` modify labels: rollup
CI: include workflow name in concurrency group
Currently, this won't change anything, because we only have one relevant workflow (`CI`), but for future proofing we should probably include the workflow name in the concurrency group.
Found by ``@klensy`` [here](https://github.com/rust-lang/rust/pull/113059#discussion_r1247213606).
Enable zlib in LLVM on aarch64-apple-darwin
Works on macOS 13.4, Xcode version 14.3.1.0.1.1683849156
This was disabled in #75500 on Apple Silicon Developer Transition Kit, but Apple appears to have fixed their zlib now
Rename `adjustment::PointerCast` and variants using it to `PointerCoercion`
It makes it sounds like the `ExprKind` and `Rvalue` are supposed to represent all pointer related casts, when in reality their just used to share a little enum variants. Make it clear there these are only coercions and that people who see this and think "why are so many pointer related casts not in these variants" aren't insane.
This enum was added in #59987. I'm not sure whether the variant sharing is actually worth it, but this at least makes it less confusing.
r? oli-obk
Update cargo
1 commits in 5b377cece0e0dd0af686cf53ce4637d5d85c2a10..45782b6b8afd1da042d45c2daeec9c0744f72cc7
2023-06-30 00:01:00 +0000 to 2023-07-05 16:54:51 +0000
- docs(ref): Provide guidance on version requirements (rust-lang/cargo#12323)
r? ``@ghost``
It makes it sound like the `ExprKind` and `Rvalue` are supposed to represent all pointer related
casts, when in reality their just used to share a some enum variants. Make it clear there these
are only coercion to make it clear why only some pointer related "casts" are in the enum.
Use `llvm-config` instead of `download-ci-llvm` in PGO script
This should avoid CI breakage when the LLVM stamp is updated, and also it will avoid an unnecessary LLVM download from CI.
r? `@jyn514`
