This updates the LLVM submodule to pick up a backported patch
to enable MemorySSA-based MemCpyOpt, which is capable of optimizing
away memcpy's across basic blocks.
Backport some LLVM compile-time improvements
Pick up two LLVM patches that reduce number of alias analysis queries, to see whether that gives any visible improvement.
r? `@ghost`
Let a portion of DefPathHash uniquely identify the DefPath's crate.
This allows to directly map from a `DefPathHash` to the crate it originates from, without constructing side tables to do that mapping -- something that is useful for incremental compilation where we deal with `DefPathHash` instead of `DefId` a lot.
It also allows to reliably and cheaply check for `DefPathHash` collisions which allows the compiler to gracefully abort compilation instead of running into a subsequent ICE at some random place in the code.
The following new piece of documentation describes the most interesting aspects of the changes:
```rust
/// A `DefPathHash` is a fixed-size representation of a `DefPath` that is
/// stable across crate and compilation session boundaries. It consists of two
/// separate 64-bit hashes. The first uniquely identifies the crate this
/// `DefPathHash` originates from (see [StableCrateId]), and the second
/// uniquely identifies the corresponding `DefPath` within that crate. Together
/// they form a unique identifier within an entire crate graph.
///
/// There is a very small chance of hash collisions, which would mean that two
/// different `DefPath`s map to the same `DefPathHash`. Proceeding compilation
/// with such a hash collision would very probably lead to an ICE and, in the
/// worst case, to a silent mis-compilation. The compiler therefore actively
/// and exhaustively checks for such hash collisions and aborts compilation if
/// it finds one.
///
/// `DefPathHash` uses 64-bit hashes for both the crate-id part and the
/// crate-internal part, even though it is likely that there are many more
/// `LocalDefId`s in a single crate than there are individual crates in a crate
/// graph. Since we use the same number of bits in both cases, the collision
/// probability for the crate-local part will be quite a bit higher (though
/// still very small).
///
/// This imbalance is not by accident: A hash collision in the
/// crate-local part of a `DefPathHash` will be detected and reported while
/// compiling the crate in question. Such a collision does not depend on
/// outside factors and can be easily fixed by the crate maintainer (e.g. by
/// renaming the item in question or by bumping the crate version in a harmless
/// way).
///
/// A collision between crate-id hashes on the other hand is harder to fix
/// because it depends on the set of crates in the entire crate graph of a
/// compilation session. Again, using the same crate with a different version
/// number would fix the issue with a high probability -- but that might be
/// easier said then done if the crates in questions are dependencies of
/// third-party crates.
///
/// That being said, given a high quality hash function, the collision
/// probabilities in question are very small. For example, for a big crate like
/// `rustc_middle` (with ~50000 `LocalDefId`s as of the time of writing) there
/// is a probability of roughly 1 in 14,750,000,000 of a crate-internal
/// collision occurring. For a big crate graph with 1000 crates in it, there is
/// a probability of 1 in 36,890,000,000,000 of a `StableCrateId` collision.
```
Given the probabilities involved I hope that no one will ever actually see the error messages. Nonetheless, I'd be glad about some feedback on how to improve them. Should we create a GH issue describing the problem and possible solutions to point to? Or a page in the rustc book?
r? `@pnkfelix` (feel free to re-assign)
rustdoc: Add an unstable option to print all unversioned files
This allows sharing those files between different doc invocations
without having to know their names ahead of time.
Helps with https://github.com/rust-lang/docs.rs/issues/1302.
r? ````@GuillaumeGomez```` cc ````@pietroalbini```` ````@Nemo157````
Cleanup rustdoc warnings
## Clean up error reporting for deprecated passes
Using `error!` here goes all the way back to the original commit, https://github.com/rust-lang/rust/pull/8540. I don't see any reason to use logging; rustdoc should use diagnostics wherever possible. See https://github.com/rust-lang/rust/pull/81932#issuecomment-785291244 for further context.
- Use spans for deprecated attributes
- Use a proper diagnostic for unknown passes, instead of error logging
- Add tests for unknown passes
- Improve some wording in diagnostics
## Report that `doc(plugins)` doesn't work using diagnostics instead of `eprintln!`
This also adds a test for the output.
This was added in https://github.com/rust-lang/rust/pull/52194. I don't see any particular reason not to use diagnostics here, I think it was just missed in https://github.com/rust-lang/rust/pull/50541.
Remove RefCell around `module_trait_cache`
This builds on https://github.com/rust-lang/rust/pull/82018 and should not be merged before.
## Don't require a `DocContext` for `report_diagnostic`
This is needed for the next commit, which needs mutable access to the `cx` from
within the `decorate` closure.
- Change `as_local_hir_id` to an associated function, since it only
needs a `TyCtxt`
- Change `source_span_for_markdown_range` to only take a `TyCtxt`
## Remove RefCell around module_trait_cache
This is mostly just changing lots of functions from `&DocContext` to `&mut DocContext`.
Change built-in kernel targets to be os = none throughout
Whether for Rust's own `target_os`, LLVM's triples, or GNU config's, the
OS-related have fields have been for code running *on* that OS, not code
hat is *part* of the OS.
The difference is huge, as syscall interfaces are nothing like
freestanding interfaces. Kernels are (hypervisors and other more exotic
situations aside) freestanding programs that use the interfaces provided
by the hardware. It's *those* interfaces, the ones external to the
program being built and its software dependencies, that are the content
of the target.
For the Linux Kernel in particular, `target_env: "gnu"` is removed for
the same reason: that `-gnu` refers to glibc or GNU/linux, neither of
which applies to the kernel itself.
Relates to #74247
rustdoc: Use substrings instead of split to grab enum variant paths
Both versions are about equally readable, but this version avoids scanning the entire path and building an intermediate array (`split()` in Rust is a lazy iterator, but not in JavaScript).
Make rustc shim's verbose output include crate_name being compiled.
This change is mainly motivated by an issue with the environment printing I added in PR 82403: multiple rustc invocations progress in parallel, and the environment output, spanning multiple lines, gets interleaved in ways make it difficult to extra the enviroment settings.
(This aforementioned difficulty is more of a hiccup than an outright show-stopper, because the environment variables tend to be the same for all of the rustc invocations, so it doesn't matter too much if one mixes up which lines one is looking at. But still: Better to fix it.)
Warn on `#![doc(test(...))]` on items other than the crate root and use future incompatible lint
Part of #82672.
This PR does multiple things:
* Create a new `INVALID_DOC_ATTRIBUTE` lint which is also "future incompatible", allowing us to use it as a warning for the moment until it turns (eventually) into a hard error.
* Use this link when `#![doc(test(...))]` isn't used at the crate level.
* Make #82702 use this new lint as well.
r? ``@jyn514``
Make ItemKind::ExternCrate looks like hir::ItemKind::ExternCrate to make transition over hir::ItemKind simpler
It was surprisingly difficult to make this change, mostly because of two issues:
* We now store the `ExternCrate` name in the parent struct (`clean::Item`), which forced me to modify the json conversion code a bit more than expected.
* The second problem was that, since we now have a `Some(name)`, it was trying to render it, ending up in a panic because we ended up in a `unreachable` statement. The solution was simply to add `!item.is_extern_crate()` in `formats::renderer` before calling `cx.item(item, &cache)?;`.
I'll continue to replace all the `clean::ItemKind` variants one by one until it looks exactly like `hir::ItemKind`. Then we'll simply discard the rustdoc type. Once this done, we'll be able to discard `clean::Item` too to use `hir::Item`.
r? ``@jyn514``
Both versions are about equally readable, but this version avoids scanning
the entire path and building an intermediate array (`split()` in Rust is
a lazy iterator, but not in JavaScript).
1. I added `--test` based on review feedback from simulacrum: I decided I would
rather include such extra context than get confused later on by its absence.
(However, I chose to encode it differently than how `[RUSTC-TIMING]` does... I
don't have much basis for doing so, other than `--test` to me more directly
reflects what it came from.)
2. I also decided to include `[RUSTC-SHIM]` at start of all of these lines
driven by the verbosity level, to make to clear where these lines of text
originate from. (Basically, I skimmed over the output and realized that a casual
observer might not be able to tell where this huge set of new lines were coming
from.)
Remove unused code from main.js
It looks like `lev_distance` was used in a very old version of the function, since it was written but never read, and Blame reports that it was added before the `checkGenerics` function header itself.
`convertHTMLToPlaintext` is was removed by 768d5e9509
Add suggestion `.collect()` for iterators in iterators
Closes#81584
```
error[E0515]: cannot return value referencing function parameter `y`
--> main3.rs:4:38
|
4 | ... .map(|y| y.iter().map(|x| x + 1))
| -^^^^^^^^^^^^^^^^^^^^^^
| |
| returns a value referencing data owned by the current function
| `y` is borrowed here
| help: Maybe use `.collect()` to allocate the iterator
```
Added the suggestion: `help: Maybe use `.collect()` to allocate the iterator`
resolve: Reduce scope of `pub_use_of_private_extern_crate` deprecation lint
This lint was deny-by-default since July 2017, crater showed 7 uses on crates.io back then (https://github.com/rust-lang/rust/pull/42894#issuecomment-311921147).
Unfortunately, the construction `pub use foo as bar` where `foo` is `extern crate foo;` was used by an older version `bitflags`, so turning it into an error causes too many regressions.
So, this PR reduces the scope of the lint instead of turning it into a hard error, and only turns some more rarely used components of it into errors.
Implement NOOP_METHOD_CALL lint
Implements the beginnings of https://github.com/rust-lang/lang-team/issues/67 - a lint for detecting noop method calls (e.g, calling `<&T as Clone>::clone()` when `T: !Clone`).
This PR does not fully realize the vision and has a few limitations that need to be addressed either before merging or in subsequent PRs:
* [ ] No UFCS support
* [ ] The warning message is pretty plain
* [ ] Doesn't work for `ToOwned`
The implementation uses [`Instance::resolve`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/instance/struct.Instance.html#method.resolve) which is normally later in the compiler. It seems that there are some invariants that this function relies on that we try our best to respect. For instance, it expects substitutions to have happened, which haven't yet performed, but we check first for `needs_subst` to ensure we're dealing with a monomorphic type.
Thank you to ```@davidtwco,``` ```@Aaron1011,``` and ```@wesleywiser``` for helping me at various points through out this PR ❤️.
Inherit `#[stable(..)]` annotations in enum variants and fields from its item
Lint changes for #65515. The stdlib will have to be updated once this lands in beta and that version is promoted in master.
It looks like `lev_distance` was used in a very old version of the function,
since it was written but never read, and Blame reports that it was added
before the `checkGenerics` function header itself.
`convertHTMLToPlaintext` is was removed by 768d5e9509
This change is mainly motivated by an issue with the environment
printing I added in PR 82403: multiple rustc invocations progress
in parallel, and the environment output, spanning multiple lines,
gets interleaved in ways make it difficult to extra the enviroment settings.
(This aforementioned difficulty is more of a hiccup than an outright
show-stopper, because the environment variables tend to be the same for all of
the rustc invocations, so it doesn't matter too much if one mixes up which lines
one is looking at. But still: Better to fix it.)
Update rustdoc documentation
- Remove most of the information about passes. Passes are deprecated.
- Add `--document-private-items`; it was missing before.
- Update `--output-format json`; it was very outdated.
- Note that `--input-format` is deprecated.
- Move deprecated options to the very end.
Closes https://github.com/rust-lang/rust/issues/82675.
r? `@Manishearth`
Shorten html::render
The `mod.rs` for librustdoc's `html::render` was over 3,000 lines. This PR reduces it to around 2,300 by
1. Moving `Context` and associated `impl`s to a separate file
2. Moving the `print_item` function and its helpers to a separate file
3. Moving `write_shared` and `write_minify` to their own file
Related to issue #60302.
Edit 1: `SharedContext` and related `impl`s is only 72 lines and so will not be moved.
