extending filesystem support for Hermit
Extending `std` to create, change and read a directory for Hermit.
Hermit is a tier 3 platform and this PR changes only files, wich are related to the tier 3 platform.
Revert "Use OS thread name by default"
This reverts #121666 (Use the OS thread name by default if `THREAD_INFO` has not been initialized) due to #123495 (Thread names are not always valid UTF-8).
It's not a direct revert because there have been other changes since that PR.
Add aarch64-apple-visionos and aarch64-apple-visionos-sim tier 3 targets
Introduces `aarch64-apple-visionos` and `aarch64-apple-visionos-sim` as tier 3 targets. This allows native development for the Apple Vision Pro's visionOS platform.
This work has been tracked in https://github.com/rust-lang/compiler-team/issues/642. There is a corresponding `libc` change https://github.com/rust-lang/libc/pull/3568 that is not required for merge.
Ideally we would be able to incorporate [this change](https://github.com/gimli-rs/object/pull/626) to the `object` crate, but the author has stated that a release will not be cut for quite a while. Therefore, the two locations that would reference the xrOS constant from `object` are hardcoded to their MachO values of 11 and 12, accompanied by TODOs to mark the code as needing change. I am open to suggestions on what to do here to get this checked in.
# Tier 3 Target Policy
At this tier, the Rust project provides no official support for a target, so we place minimal requirements on the introduction of targets.
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
See [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
> * Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> * If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
This naming scheme matches `$ARCH-$VENDOR-$OS-$ABI` which is matches the iOS Apple Silicon simulator (`aarch64-apple-ios-sim`) and other Apple targets.
> Tier 3 targets may have unusual requirements to build or use, but must not
create legal issues or impose onerous legal terms for the Rust project or for
Rust developers or users.
> - The target must not introduce license incompatibilities.
> - Anything added to the Rust repository must be under the standard Rust license (`MIT OR Apache-2.0`).
> - The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the `tidy` tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to besubject to any new license requirements.
> - Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, `rustc` built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> - "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are *not* limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
This contribution is fully available under the standard Rust license with no additional legal restrictions whatsoever. This PR does not introduce any new dependency less permissive than the Rust license policy.
The new targets do not depend on proprietary libraries.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This new target mirrors the standard library for watchOS and iOS, with minor divergences.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation is provided in [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> * This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> * Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> * In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
I acknowledge these requirements and intend to ensure that they are met.
This target does not touch any existing tier 2 or tier 1 targets and should not break any other targets.
Avoid panicking unnecessarily on startup
On Windows, in `lang_start` we add an exception handler to catch stack overflows and we also reserve some stack space for the handler. Both of these are useful but they're not strictly necessary. The standard library has to work without them (e.g. if Rust is used from a foreign entry point) and the negative effect of not doing them is limited (i.e. you don't get the friendly stack overflow message).
As we really don't want to panic pre-main unless absolutely necessary, it now won't panic on failure. I've added some debug assertions so as to avoid programmer error.
Provide cabi_realloc on wasm32-wasip2 by default
This commit provides a component model intrinsic in the standard library
by default on the `wasm32-wasip2` target. This intrinsic is not
required by the component model itself but is quite common to use, for
example it's needed if a wasm module receives a string or a list.
The intention of this commit is to provide an overridable definition in
the standard library through a weak definition of this function. That
means that downstream crates can provide their own customized and more
specific versions if they'd like, but the standard library's version
should suffice for general-purpose use.
rename ptr::from_exposed_addr -> ptr::with_exposed_provenance
As discussed on [Zulip](https://rust-lang.zulipchat.com/#narrow/stream/136281-t-opsem/topic/To.20expose.20or.20not.20to.20expose/near/427757066).
The old name, `from_exposed_addr`, makes little sense as it's not the address that is exposed, it's the provenance. (`ptr.expose_addr()` stays unchanged as we haven't found a better option yet. The intended interpretation is "expose the provenance and return the address".)
The new name nicely matches `ptr::without_provenance`.
Refactor stack overflow handling
Currently, every platform must implement a `Guard` that protects a thread from stack overflow. However, UNIX is the only platform that actually does so. Windows has a different mechanism for detecting stack overflow, while the other platforms don't detect it at all. Also, the UNIX stack overflow handling is split between `sys::pal::unix::stack_overflow`, which implements the signal handler, and `sys::pal::unix::thread`, which detects/installs guard pages.
This PR cleans this by getting rid of `Guard` and unifying UNIX stack overflow handling inside `stack_overflow` (commit 1). Therefore we can get rid of `sys_common::thread_info`, which stores `Guard` and the current `Thread` handle and move the `thread::current` TLS variable into `thread` (commit 2).
The second commit is not strictly speaking necessary. To keep the implementation clean, I've included it here, but if it causes too much noise, I can split it out without any trouble.
std:🧵 refine available_parallelism for solaris/illumos.
Rather than the system-wide available cpus fallback solution, we fetch the cpus bound to the current process.
Relax SeqCst ordering in standard library.
Every single SeqCst in the standard library is unnecessary. In all cases, Relaxed or Release+Acquire was sufficient.
As I [wrote](https://marabos.nl/atomics/memory-ordering.html#common-misconceptions) in my book on atomics:
> [..] when reading code, SeqCst basically tells the reader: "this operation depends on the total order of every single SeqCst operation in the program," which is an incredibly far-reaching claim. The same code would likely be easier to review and verify if it used weaker memory ordering instead, if possible. For example, Release effectively tells the reader: "this relates to an acquire operation on the same variable," which involves far fewer considerations when forming an understanding of the code.
>
> It is advisable to see SeqCst as a warning sign. Seeing it in the wild often means that either something complicated is going on, or simply that the author did not take the time to analyze their memory ordering related assumptions, both of which are reasons for extra scrutiny.
r? ````@Amanieu```` ````@joboet````
Use `UnsafeCell` for fast constant thread locals
This uses `UnsafeCell` instead of `static mut` for fast constant thread locals. This changes the type of the TLS shims to return `&UnsafeCell<T>` instead of `*mut T` which means they are always non-null so LLVM can optimize away the check for `Some` in `LocalKey::with` if `T` has no destructor.
LLVM is currently unable to do this optimization as we lose the fact that `__getit` always returns `Some` as it gets optimized to just returning the value of the TLS shim.
Bump windows-bindgen to 0.55.0
windows-bindgen is the crate used to generate std's Windows API bindings.
Not many changes for us, it's mostly just simplifying the generate code (e.g. no more `-> ()`). The one substantial change is some structs now use `i8` byte arrays instead of `u8`. However, this only impacts one test.
