Stabilize `atomic_as_ptr`
Fixes#66893
This stabilizes the `as_ptr` methods for atomics. The stabilization feature gate used here is `atomic_as_ptr` which supersedes `atomic_mut_ptr` to match the change in https://github.com/rust-lang/rust/pull/107736.
This needs FCP.
New stable API:
```rust
impl AtomicBool {
pub const fn as_ptr(&self) -> *mut bool;
}
impl AtomicI32 {
pub const fn as_ptr(&self) -> *mut i32;
}
// Includes all other atomic types
impl<T> AtomicPtr<T> {
pub const fn as_ptr(&self) -> *mut *mut T;
}
```
r? libs-api
``@rustbot`` label +needs-fcp
Before this change, the following functions and macros were annotated
with `#[cfg(target_has_atomic = "8")]` or
`#[cfg(target_has_atomic_load_store = "8")]`:
* `atomic_int`
* `strongest_failure_ordering`
* `atomic_swap`
* `atomic_add`
* `atomic_sub`
* `atomic_compare_exchange`
* `atomic_compare_exchange_weak`
* `atomic_and`
* `atomic_nand`
* `atomic_or`
* `atomic_xor`
* `atomic_max`
* `atomic_min`
* `atomic_umax`
* `atomic_umin`
However, none of those functions and macros actually depend on 8-bit
width and they are needed for all atomic widths (16-bit, 32-bit, 64-bit
etc.). Some targets might not support 8-bit atomics (i.e. BPF, if we
would enable atomic CAS for it).
This change fixes that by removing the `"8"` argument from annotations,
which results in accepting the whole variety of widths.
Fixes#106845Fixes#106795
Signed-off-by: Michal Rostecki <vadorovsky@gmail.com>
Simplify memory ordering intrinsics
This changes the names of the atomic intrinsics to always fully include their memory ordering arguments.
```diff
- atomic_cxchg
+ atomic_cxchg_seqcst_seqcst
- atomic_cxchg_acqrel
+ atomic_cxchg_acqrel_release
- atomic_cxchg_acqrel_failrelaxed
+ atomic_cxchg_acqrel_relaxed
// And so on.
```
- `seqcst` is no longer implied
- The failure ordering on chxchg is no longer implied in some cases, but now always explicitly part of the name.
- `release` is no longer shortened to just `rel`. That was especially confusing, since `relaxed` also starts with `rel`.
- `acquire` is no longer shortened to just `acq`, such that the names now all match the `std::sync::atomic::Ordering` variants exactly.
- This now allows for more combinations on the compare exchange operations, such as `atomic_cxchg_acquire_release`, which is necessary for #68464.
- This PR only exposes the new possibilities through unstable intrinsics, but not yet through the stable API. That's for [a separate PR](https://github.com/rust-lang/rust/pull/98383) that requires an FCP.
Suffixes for operations with a single memory order:
| Order | Before | After |
|---------|--------------|------------|
| Relaxed | `_relaxed` | `_relaxed` |
| Acquire | `_acq` | `_acquire` |
| Release | `_rel` | `_release` |
| AcqRel | `_acqrel` | `_acqrel` |
| SeqCst | (none) | `_seqcst` |
Suffixes for compare-and-exchange operations with two memory orderings:
| Success | Failure | Before | After |
|---------|---------|--------------------------|--------------------|
| Relaxed | Relaxed | `_relaxed` | `_relaxed_relaxed` |
| Relaxed | Acquire | ❌ | `_relaxed_acquire` |
| Relaxed | SeqCst | ❌ | `_relaxed_seqcst` |
| Acquire | Relaxed | `_acq_failrelaxed` | `_acquire_relaxed` |
| Acquire | Acquire | `_acq` | `_acquire_acquire` |
| Acquire | SeqCst | ❌ | `_acquire_seqcst` |
| Release | Relaxed | `_rel` | `_release_relaxed` |
| Release | Acquire | ❌ | `_release_acquire` |
| Release | SeqCst | ❌ | `_release_seqcst` |
| AcqRel | Relaxed | `_acqrel_failrelaxed` | `_acqrel_relaxed` |
| AcqRel | Acquire | `_acqrel` | `_acqrel_acquire` |
| AcqRel | SeqCst | ❌ | `_acqrel_seqcst` |
| SeqCst | Relaxed | `_failrelaxed` | `_seqcst_relaxed` |
| SeqCst | Acquire | `_failacq` | `_seqcst_acquire` |
| SeqCst | SeqCst | (none) | `_seqcst_seqcst` |
clarify how Rust atomics correspond to C++ atomics
``@cbeuw`` noted in https://github.com/rust-lang/miri/pull/1963 that the correspondence between C++ atomics and Rust atomics is not quite as obvious as one might think, since in Rust I can use `get_mut` to treat previously non-atomic data as atomic. However, I think using C++20 `atomic_ref`, we can establish a suitable relation between the two -- or do you see problems with that ``@cbeuw?`` (I recall you said there was some issue, but it was deep inside that PR and Github makes it impossible to find...)
Cc ``@thomcc;`` not sure whom else to ping for atomic memory model things.
Change orderings of `Debug` for the Atomic types to `Relaxed`.
This reduces synchronization between threads when debugging the atomic types. Reducing the synchronization means that executions with and without the debug calls will be more consistent, making it easier to debug.
We discussed this on the Rust Community Discord with `@ibraheemdev` before.
This reduces synchronization between threads when
debugging the atomic types.
Reducing the synchronization means that executions with and
without the debug calls will be more consistent,
making it easier to debug.
Remove `#[rustc_deprecated]`
This removes `#[rustc_deprecated]` and introduces diagnostics to help users to the right direction (that being `#[deprecated]`). All uses of `#[rustc_deprecated]` have been converted. CI is expected to fail initially; this requires #95958, which includes converting `stdarch`.
I plan on following up in a short while (maybe a bootstrap cycle?) removing the diagnostics, as they're only intended to be short-term.
Handle rustc_const_stable attribute in library feature collector
The library feature collector in [compiler/rustc_passes/src/lib_features.rs](551b4fa395/compiler/rustc_passes/src/lib_features.rs) has only been looking at `#[stable(…)]`, `#[unstable(…)]`, and `#[rustc_const_unstable(…)]` attributes, while ignoring `#[rustc_const_stable(…)]`. The consequences of this were:
- When any const feature got stabilized (changing one or more `rustc_const_unstable` to `rustc_const_stable`), users who had previously enabled that unstable feature using `#![feature(…)]` would get told "unknown feature", rather than rustc's nicer "the feature … has been stable since … and no longer requires an attribute to enable".
This can be seen in the way that https://github.com/rust-lang/rust/pull/93957#issuecomment-1079794660 failed after rebase:
```console
error[E0635]: unknown feature `const_ptr_offset`
--> $DIR/offset_from_ub.rs:1:35
|
LL | #![feature(const_ptr_offset_from, const_ptr_offset)]
| ^^^^^^^^^^^^^^^^
```
- We weren't enforcing that a particular feature is either stable everywhere or unstable everywhere, and that a feature that has been stabilized has the same stabilization version everywhere, both of which we enforce for the other stability attributes.
This PR updates the library feature collector to handle `rustc_const_stable`, and fixes places in the standard library and test suite where `rustc_const_stable` was being used in a way that does not meet the rules for a stability attribute.
Add `Atomic*::get_mut_slice`
This PR adds the inverse of `Atomic*::from_mut_slice` introduced in #94384 with the following API:
```rust
// core::sync::atomic
impl Atomic* {
fn get_mut_slice(this: &mut [Self]) -> &mut [*];
}
```
cc `@cuviper`
-----
For now I've used the same tracking issue as `Atomic*::from_mut_slice`, should I open a new one?
This updates the standard library's documentation to use the new syntax. The
documentation is worthwhile to update as it should be more idiomatic
(particularly for features like this, which are nice for users to get acquainted
with). The general codebase is likely more hassle than benefit to update: it'll
hurt git blame, and generally updates can be done by folks updating the code if
(and when) that makes things more readable with the new format.
A few places in the compiler and library code are updated (mostly just due to
already having been done when this commit was first authored).
