Don't output incremental test artifacts into working directory
Currently tests can ICE when the test spits out `inc-fat` incremental artifacts directly into the top of the git checkout, and then the compiler version changes, and it reads nonsense incremental artifacts on a subsequent test run.
r? `@oli-obk`
cc `@Oneirical,` I think you added this -- I think the right flag to add when porting `-Cincremental` run-make tests is to use `//@ incremental` rather than manually specifying the `-Cincremental` rustflag.
Explain why we require `_` for empty patterns
This adds a note to the "non-exhaustive patterns" diagnostic to explain why we sometimes require extra `_` patterns on empty types. This is one of the two diagnostic improvements I wanted to do before [stabilizing `min_exhaustive_patterns`](https://github.com/rust-lang/rust/pull/122792).
r? ``@compiler-errors``
Just totally fully deny late-bound consts
Kinda don't care about supporting this until we have where clauses on binders. They're super busted and should be reworked in due time, and they are approximately 100% useless until then 😸Fixes#127970Fixes#127009
r? ``@BoxyUwU``
Remove unnecessary impl sorting in queries and metadata
Removes unnecessary impl sorting because queries already return their keys in HIR definition order: https://github.com/rust-lang/rust/issues/120371#issuecomment-1926422838
r? `@cjgillot` or `@lcnr` -- unless I totally misunderstood what was being asked for here? 😆fixes#120371
Forbid borrows and unsized types from being used as the type of a const generic under `adt_const_params`
Fixes#112219Fixes#112124Fixes#112125
### Motivation
Currently the `adt_const_params` feature allows writing `Foo<const N: [u8]>` this is entirely useless as it is not possible to write an expression which evaluates to a type that is not `Sized`. In order to actually use unsized types in const generics they are typically written as `const N: &[u8]` which *is* possible to provide a value of.
Unfortunately allowing the types of const parameters to contain references is non trivial (#120961) as it introduces a number of difficult questions about how equality of references in the type system should behave. References in the types of const generics is largely only useful for using unsized types in const generics.
This PR introduces a new feature gate `unsized_const_parameters` and moves support for `const N: [u8]` and `const N: &...` from `adt_const_params` into it. The goal here hopefully is to experiment with allowing `const N: [u8]` to work without references and then eventually completely forbid references in const generics.
Splitting this out into a new feature gate means that stabilization of `adt_const_params` does not have to resolve#120961 which is the only remaining "big" blocker for the feature. Remaining issues after this are a few ICEs and naming bikeshed for `ConstParamTy`.
### Implementation
The implementation is slightly subtle here as we would like to ensure that a stabilization of `adt_const_params` is forwards compatible with any outcome of `unsized_const_parameters`. This is inherently tricky as we do not support unstable trait implementations and we determine whether a type is valid as the type of a const parameter via a trait bound.
There are a few constraints here:
- We would like to *allow for the possibility* of adding a `Sized` supertrait to `ConstParamTy` in the event that we wind up opting to not support unsized types and instead requiring people to write the 'sized version', e.g. `const N: [u8; M]` instead of `const N: [u8]`.
- Crates should be able to enable `unsized_const_parameters` and write trait implementations of `ConstParamTy` for `!Sized` types without downstream crates that only enable `adt_const_params` being able to observe this (required for std to be able to `impl<T> ConstParamTy for [T]`
Ultimately the way this is accomplished is via having two traits (sad), `ConstParamTy` and `UnsizedConstParamTy`. Depending on whether `unsized_const_parameters` is enabled or not we change which trait is used to check whether a type is allowed to be a const parameter.
Long term (when stabilizing `UnsizedConstParamTy`) it should be possible to completely merge these traits (and derive macros), only having a single `trait ConstParamTy` and `macro ConstParamTy`.
Under `adt_const_params` it is now illegal to directly refer to `ConstParamTy` it is only used as an internal impl detail by `derive(ConstParamTy)` and checking const parameters are well formed. This is necessary in order to ensure forwards compatibility with all possible future directions for `feature(unsized_const_parameters)`.
Generally the intuition here should be that `ConstParamTy` is the stable trait that everything uses, and `UnsizedConstParamTy` is that plus unstable implementations (well, I suppose `ConstParamTy` isn't stable yet :P).
Rollup of 9 pull requests
Successful merges:
- #123196 (Add Process support for UEFI)
- #127556 (Replace a long inline "autoref" comment with method docs)
- #127693 (Migrate `crate-hash-rustc-version` to `rmake`)
- #127866 (Conditionally build `wasm-component-ld` )
- #127918 (Safely enforce thread name requirements)
- #127948 (fixes panic error `index out of bounds` in conflicting error)
- #127980 (Avoid ref when using format! in compiler)
- #127984 (Avoid ref when using format! in src)
- #127987 (More accurate suggestion for `-> Box<dyn Trait>` or `-> impl Trait`)
r? `@ghost`
`@rustbot` modify labels: rollup
Add a test for #107975
The int is zero. But also not zero. This is so much fun.
This is a part of #105107.
Initially I was going to just rebase #108445, but quite a few things changed since then:
* The [mcve](https://github.com/rust-lang/rust/issues/105787#issuecomment-1750112388) used for #105787 got fixed.[^upd2]
* You can't just `a ?= b` for #107975 anymore. Now you have to `a-b ?= 0`. This is what this PR does. As an additional flex, it show that three ways of converting a pointer to its address have this issue:
1. `as usize`
2. `.expose_provenance()`
3. `.addr()`
* #108425 simply got fixed. Yay.
As an aside, the naming for `addr_of!` is quite unfortunate in context of provenance APIs. Because `addr_of!` gives you a pointer, but what provenance APIs refer to as "address" is the `usize` value. Oh well.
UPD1: GitHub is incapable of parsing #107975 in the PR name, so let's add it here.
[^upd2]: UPD2: [The other mcve](https://github.com/rust-lang/rust/issues/105787#issue-1500501670) does not work anymore either, saying "this behavior recently changed as a result of a bug fix; see rust-lang/rust#56105 for details."
More accurate suggestion for `-> Box<dyn Trait>` or `-> impl Trait`
When encountering `-> Trait`, suggest `-> Box<dyn Trait>` (instead of `-> Box<Trait>`.
If there's a single returned type within the `fn`, suggest `-> impl Trait`.
When encountering `-> Trait`, suggest `-> Box<dyn Trait>` (instead of `-> Box<Trait>`.
If there's a single returned type within the `fn`, suggest `-> impl Trait`.
Rollup of 6 pull requests
Successful merges:
- #127295 (CFI: Support provided methods on traits)
- #127814 (`C-cmse-nonsecure-call`: improved error messages)
- #127949 (fix: explain E0120 better cover cases when its raised)
- #127966 (Use structured suggestions for unconstrained generic parameters on impl blocks)
- #127976 (Lazy type aliases: Diagostics: Detect bivariant ty params that are only used recursively)
- #127978 (Avoid ref when using format! for perf)
r? `@ghost`
`@rustbot` modify labels: rollup
Lazy type aliases: Diagostics: Detect bivariant ty params that are only used recursively
Follow-up to errs's #127871. Extends the logic to cover LTAs, too, not just ADTs.
This change only takes effect with the next-gen solver enabled as cycle errors like
the one we have here are fatal in the old solver. That's my explanation anyways.
r? compiler-errors
`C-cmse-nonsecure-call`: improved error messages
tracking issue: #81391
issue for the error messages (partially implemented by this PR): #81347
related, in that it also deals with CMSE: https://github.com/rust-lang/rust/pull/127766
When using the `C-cmse-nonsecure-call` ABI, both the arguments and return value must be passed via registers. Previously, when violating this constraint, an ugly LLVM error would be shown. Now, the rust compiler itself will print a pretty message and link to more information.
CFI: Support provided methods on traits
Provided methods currently don't get type erasure performed on them because they are not in an `impl` block. If we are instantiating a method that is an associated item, but *not* in an impl block, treat it as a provided method instead.
interpret: add sanity check in dyn upcast to double-check what codegen does
For dyn receiver calls, we already have two codepaths: look up the function to call by indexing into the vtable, or alternatively resolve the DefId given the dynamic type of the receiver. With debug assertions enabled, the interpreter does both and compares the results. (Without debug assertions we always use the vtable as it is simpler.)
This PR does the same for dyn trait upcasts. However, for casts *not* using the vtable is the easier thing to do, so now the vtable path is the debug-assertion-only path. In particular, there are cases where the vtable does not contain a pointer for upcasts but instead reuses the old pointer: when the supertrait vtable is a prefix of the larger vtable. We don't want to expose this optimization and detect UB if people do a transmute assuming this optimization, so we cannot in general use the vtable indexing path.
r? ``@oli-obk``
Rollup of 7 pull requests
Successful merges:
- #121533 (Handle .init_array link_section specially on wasm)
- #127825 (Migrate `macos-fat-archive`, `manual-link` and `archive-duplicate-names` `run-make` tests to rmake)
- #127891 (Tweak suggestions when using incorrect type of enum literal)
- #127902 (`collect_tokens_trailing_token` cleanups)
- #127928 (Migrate `lto-smoke-c` and `link-path-order` `run-make` tests to rmake)
- #127935 (Change `binary_asm_labels` to only fire on x86 and x86_64)
- #127953 ([compiletest] Search *.a when getting dynamic libraries on AIX)
r? `@ghost`
`@rustbot` modify labels: rollup
Don't allow unsafe statics outside of extern blocks
This PR fixes a regression where we allowed `unsafe static` items in top-level modules (i.e. outside of `unsafe extern` blocks).
It's harder IMO to integrate this into the `check_item_safety` function, so I opted to just put this check on the `static` item itself.
Beta version of this lives at #127944.
r? ```@oli-obk``` or ```@spastorino```
When finding item gated behind a `cfg` flag, point at it
Previously we would only mention that the item was gated out, and opportunisitically mention the feature flag name when possible. We now point to the place where the item was gated, which can be behind layers of macro indirection, or in different modules.
```
error[E0433]: failed to resolve: could not find `doesnt_exist` in `inner`
--> $DIR/diagnostics-cross-crate.rs:18:23
|
LL | cfged_out::inner::doesnt_exist::hello();
| ^^^^^^^^^^^^ could not find `doesnt_exist` in `inner`
|
note: found an item that was configured out
--> $DIR/auxiliary/cfged_out.rs:6:13
|
LL | pub mod doesnt_exist {
| ^^^^^^^^^^^^
note: the item is gated here
--> $DIR/auxiliary/cfged_out.rs:5:5
|
LL | #[cfg(FALSE)]
| ^^^^^^^^^^^^^
```
Represent type-level consts with new-and-improved `hir::ConstArg`
### Summary
This is a step toward `min_generic_const_exprs`. We now represent all const
generic arguments using an enum that differentiates between const *paths*
(temporarily just bare const params) and arbitrary anon consts that may perform
computations. This will enable us to cleanly implement the `min_generic_const_args`
plan of allowing the use of generics in paths used as const args, while
disallowing their use in arbitrary anon consts. Here is a summary of the salient
aspects of this change:
- Add `current_def_id_parent` to `LoweringContext`
This is needed to track anon const parents properly once we implement
`ConstArgKind::Path` (which requires moving anon const def-creation
outside of `DefCollector`).
- Create `hir::ConstArgKind` enum with `Path` and `Anon` variants. Use it in the
existing `hir::ConstArg` struct, replacing the previous `hir::AnonConst` field.
- Use `ConstArg` for all instances of const args. Specifically, use it instead
of `AnonConst` for assoc item constraints, array lengths, and const param
defaults.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at https://github.com/rust-lang/rust/issues/127009.
### Followup items post-merge
- Use `ConstArgKind::Path` for all const paths, not just const params.
- Fix (no github dont close this issue) #127009
- If a path in generic args doesn't resolve as a type, try to resolve as a const
instead (do this in rustc_resolve). Then remove the special-casing from
`rustc_ast_lowering`, so that all params will automatically be lowered as
`ConstArgKind::Path`.
- (?) Consider making `const_evaluatable_unchecked` a hard error, or at least
trying it in crater
r? `@BoxyUwU`
Change `binary_asm_labels` to only fire on x86 and x86_64
In <https://github.com/rust-lang/rust/pull/126922>, the `binary_asm_labels` lint was added which flags labels such as `0:` and `1:`. Before that change, LLVM was giving a confusing error on x86/x86_64 because of an incorrect interpretation.
However, targets other than x86 and x86_64 never had the error message and have not been a problem. This means that the lint was causing code that previously worked to start failing (e.g. `compiler_builtins`), rather than only providing a more clear messages where there has always been an error.
Adjust the lint to only fire on x86 and x86_64 assembly to avoid this regression.
Also update the help message.
Fixes: https://github.com/rust-lang/rust/issues/127821
Tweak suggestions when using incorrect type of enum literal
More accurate suggestions when writing wrong style of enum variant literal:
```
error[E0533]: expected value, found struct variant `E::Empty3`
--> $DIR/empty-struct-braces-expr.rs:18:14
|
LL | let e3 = E::Empty3;
| ^^^^^^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | let e3 = E::Empty3 {};
| ++
```
```
error[E0533]: expected value, found struct variant `E::V`
--> $DIR/struct-literal-variant-in-if.rs:10:13
|
LL | if x == E::V { field } {}
| ^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | if x == (E::V { field }) {}
| + +
```
```
error[E0618]: expected function, found enum variant `Enum::Unit`
--> $DIR/suggestion-highlights.rs:15:5
|
LL | Unit,
| ---- enum variant `Enum::Unit` defined here
...
LL | Enum::Unit();
| ^^^^^^^^^^--
| |
| call expression requires function
|
help: `Enum::Unit` is a unit enum variant, and does not take parentheses to be constructed
|
LL - Enum::Unit();
LL + Enum::Unit;
|
```
```
error[E0599]: no variant or associated item named `tuple` found for enum `Enum` in the current scope
--> $DIR/suggestion-highlights.rs:36:11
|
LL | enum Enum {
| --------- variant or associated item `tuple` not found for this enum
...
LL | Enum::tuple;
| ^^^^^ variant or associated item not found in `Enum`
|
help: there is a variant with a similar name
|
LL | Enum::Tuple(/* i32 */);
| ~~~~~~~~~~~~~~~~;
|
```
Tweak "field not found" suggestion when giving struct literal for tuple struct type:
```
error[E0560]: struct `S` has no field named `x`
--> $DIR/nested-non-tuple-tuple-struct.rs:8:19
|
LL | pub struct S(f32, f32);
| - `S` defined here
...
LL | let _x = (S { x: 1.0, y: 2.0 }, S { x: 3.0, y: 4.0 });
| ^ field does not exist
|
help: `S` is a tuple struct, use the appropriate syntax
|
LL | let _x = (S(/* f32 */, /* f32 */), S { x: 3.0, y: 4.0 });
| ~~~~~~~~~~~~~~~~~~~~~~~
Use more accurate span for `addr_of!` suggestion
Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
Mention that type parameters are used recursively on bivariance error
Right now when a type parameter is used recursively, even with indirection (so it has a finite size) we say that the type parameter is unused:
```
struct B<T>(Box<B<T>>);
```
This is confusing, because the type parameter is *used*, it just doesn't have its variance constrained. This PR tweaks that message to mention that it must be used *non-recursively*.
Not sure if we should actually mention "variance" here, but also I'd somewhat prefer we don't keep the power users in the dark w.r.t the real underlying issue, which is that the variance isn't constrained. That technical detail is reserved for a note, though.
cc `@fee1-dead`
Fixes#118976Fixes#26283Fixes#53191Fixes#105740Fixes#110466
Fix ICE in suggestion caused by `⩵` being recovered as `==`
The second suggestion shown here would previously incorrectly assume that the span corresponding to `⩵` was 2 bytes wide composed by 2 1 byte wide chars, so a span pointing at `==` could point only at one of the `=` to remove it. Instead, we now replace the whole thing (as we should have the whole time):
```
error: unknown start of token: \u{2a75}
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: Unicode character '⩵' (Two Consecutive Equals Signs) looks like '==' (Double Equals Sign), but it is not
|
LL | const A: usize == 2;
| ~~
error: unexpected `==`
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: try using `=` instead
|
LL | const A: usize = 2;
| ~
```
Fix#127823.
Fuchsia status code match arm
Adds a match arm for the Fuchsia status code upon a process abort. An additional change moves the Windows status code down into the match arm itself instead of being defined as a constant elsewhere.
r? tmandry
The link pointed to a closed issue. Create a new one and point the link
to it.
Also add a help message to hint what change the user could make.
Fixes: https://github.com/rust-lang/rust/issues/127821
In <https://github.com/rust-lang/rust/pull/126922>, the
`binary_asm_labels` lint was added which flags labels such as `0:` and
`1:`. Before that change, LLVM was giving a confusing error on
x86/x86_64 because of an incorrect interpretation.
However, targets other than x86 and x86_64 never had the error message
and have not been a problem. This means that the lint was causing code
that previously worked to start failing (e.g. `compiler_builtins`),
rather than only providing a more clear messages where there has always
been an error.
Adjust the lint to only fire on x86 and x86_64 assembly to avoid this
regression.
Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
```
error[E0560]: struct `S` has no field named `x`
--> $DIR/nested-non-tuple-tuple-struct.rs:8:19
|
LL | pub struct S(f32, f32);
| - `S` defined here
...
LL | let _x = (S { x: 1.0, y: 2.0 }, S { x: 3.0, y: 4.0 });
| ^ field does not exist
|
help: `S` is a tuple struct, use the appropriate syntax
|
LL | let _x = (S(/* f32 */, /* f32 */), S { x: 3.0, y: 4.0 });
| ~~~~~~~~~~~~~~~~~~~~~~~
```
```
error[E0533]: expected value, found struct variant `E::Empty3`
--> $DIR/empty-struct-braces-expr.rs:18:14
|
LL | let e3 = E::Empty3;
| ^^^^^^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | let e3 = E::Empty3 {};
| ++
```
```
error[E0533]: expected value, found struct variant `E::V`
--> $DIR/struct-literal-variant-in-if.rs:10:13
|
LL | if x == E::V { field } {}
| ^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | if x == (E::V { field }) {}
| + +
```
```
error[E0618]: expected function, found enum variant `Enum::Unit`
--> $DIR/suggestion-highlights.rs:15:5
|
LL | Unit,
| ---- enum variant `Enum::Unit` defined here
...
LL | Enum::Unit();
| ^^^^^^^^^^--
| |
| call expression requires function
|
help: `Enum::Unit` is a unit enum variant, and does not take parentheses to be constructed
|
LL - Enum::Unit();
LL + Enum::Unit;
|
```
```
error[E0599]: no variant or associated item named `tuple` found for enum `Enum` in the current scope
--> $DIR/suggestion-highlights.rs:36:11
|
LL | enum Enum {
| --------- variant or associated item `tuple` not found for this enum
...
LL | Enum::tuple;
| ^^^^^ variant or associated item not found in `Enum`
|
help: there is a variant with a similar name
|
LL | Enum::Tuple(/* i32 */);
| ~~~~~~~~~~~~~~~~;
|
```
The second suggestion shown here would previously incorrectly assume that the span corresponding to `⩵` was 2 bytes wide composed by 2 1 byte wide chars, so a span pointing at `==` could point only at one of the `=` to remove it. Instead, we now replace the whole thing (as we should have the whole time):
```
error: unknown start of token: \u{2a75}
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: Unicode character '⩵' (Two Consecutive Equals Signs) looks like '==' (Double Equals Sign), but it is not
|
LL | const A: usize == 2;
| ~~
error: unexpected `==`
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: try using `=` instead
|
LL | const A: usize = 2;
| ~
```
make pub_use_of_private_extern_crate show up in cargo's future breakage reports
This has been a lint for many years.
However, turns out that outright removing it right now would lead to [tons of crater regressions](https://github.com/rust-lang/rust/pull/127656#issuecomment-2233288534) due to crates depending on an ancient version of `bitflags`. So for now this PR just makes this future-compat lint show up in cargo's reports, so people are warned when they use a dependency that is affected by this.
r? `@petrochenkov`
