Add aarch64-apple-visionos and aarch64-apple-visionos-sim tier 3 targets
Introduces `aarch64-apple-visionos` and `aarch64-apple-visionos-sim` as tier 3 targets. This allows native development for the Apple Vision Pro's visionOS platform.
This work has been tracked in https://github.com/rust-lang/compiler-team/issues/642. There is a corresponding `libc` change https://github.com/rust-lang/libc/pull/3568 that is not required for merge.
Ideally we would be able to incorporate [this change](https://github.com/gimli-rs/object/pull/626) to the `object` crate, but the author has stated that a release will not be cut for quite a while. Therefore, the two locations that would reference the xrOS constant from `object` are hardcoded to their MachO values of 11 and 12, accompanied by TODOs to mark the code as needing change. I am open to suggestions on what to do here to get this checked in.
# Tier 3 Target Policy
At this tier, the Rust project provides no official support for a target, so we place minimal requirements on the introduction of targets.
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
See [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
> * Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> * If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
This naming scheme matches `$ARCH-$VENDOR-$OS-$ABI` which is matches the iOS Apple Silicon simulator (`aarch64-apple-ios-sim`) and other Apple targets.
> Tier 3 targets may have unusual requirements to build or use, but must not
create legal issues or impose onerous legal terms for the Rust project or for
Rust developers or users.
> - The target must not introduce license incompatibilities.
> - Anything added to the Rust repository must be under the standard Rust license (`MIT OR Apache-2.0`).
> - The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the `tidy` tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to besubject to any new license requirements.
> - Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, `rustc` built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> - "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are *not* limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
This contribution is fully available under the standard Rust license with no additional legal restrictions whatsoever. This PR does not introduce any new dependency less permissive than the Rust license policy.
The new targets do not depend on proprietary libraries.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This new target mirrors the standard library for watchOS and iOS, with minor divergences.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation is provided in [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> * This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> * Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> * In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
I acknowledge these requirements and intend to ensure that they are met.
This target does not touch any existing tier 2 or tier 1 targets and should not break any other targets.
handle rustc args properly in bootstrap
Because `RUSTFLAGS` gets overwritten during the conversion from `Cargo` to `Command`, the passed rustc args were being lost. This change combines the rustc args with the values that override `RUSTFLAGS`.
Fixes#123228
Support running library tests in Miri
This adds a new bootstrap subcommand `./x.py miri` which can test libraries in Miri. This is in preparation for eventually doing that as part of bors CI, but this PR only adds the infrastructure, and doesn't enable it yet.
`@rust-lang/bootstrap` should this be `x.py test --miri library/core` or `x.py miri library/core`? The flag has the advantage that we don't have to copy all the arguments from `Subcommand::Test`. It has the disadvantage that most test steps just ignore `--miri` and still run tests the regular way. For clippy you went the route of making it a separate subcommand. ~~I went with a flag now as that seemed easier, but I can change this.~~ I made it a new subcommand. Note however that the regular cargo invocation would be `cargo miri test ...`, so `x.py` is still going to be different in that the `test` is omitted. That said, we could also make it `./x.py miri-test` to make that difference smaller -- that's in fact more consistent with the internal name of the command when bootstrap invokes cargo.
`@rust-lang/libs` ~~unfortunately this PR does some unholy things to the `lib.rs` files of our library crates.~~
`@m-ou-se` found a way that entirely avoids library-level hacks, except for some new small `lib.miri.rs` files that hopefully you will never have to touch. There's a new hack in cargo-miri but there it is in good company...
Because `RUSTFLAGS` gets overwritten during the conversion from `Cargo` to `Command`,
the passed rustc args were being lost. This change combines the rustc args with the values
that override `RUSTFLAGS`.
Signed-off-by: onur-ozkan <work@onurozkan.dev>
Refactor the way bootstrap invokes `cargo miri`
Instead of basically doing `cargo run --manifest-path=<cargo-miri's manifest> -- miri`, let's invoke the `cargo-miri` binary directly. That means less indirections, and also makes it easier to e.g. run the libcore test suite in Miri. (But there are still other issues with that.)
Also also adjusted Miri's stage numbering so that it is consistent with rustc/rustdoc.
This also makes `./x.py test miri` honor `--no-doc`.
And this fixes https://github.com/rust-lang/rust/issues/123177 by moving where we handle parallel_compiler.
Make source tarball generation more reproducible
This PR performs several changes to source tarball generation (`x dist rustc-src`) in order to make it more reproducible (in light of the recent "xz backdoor"...). I want to follow up on it with making a separate CI workflow for generating the tarball.
After this PR, running this locally produces identical checksums:
```bash
$ ./x dist rustc-src
$ sha256sum build/dist/rustc-1.79.0-src.tar.gz
$ ./x dist rustc-src
$ sha256sum build/dist/rustc-1.79.0-src.tar.gz
```
r? `@Mark-Simulacrum`
copy any file from stage0/lib to stage0-sysroot/lib
With the LLVM 18 upgrade, the name of the LLVM library has been changed to something like `libLLVM.so.18.1-rust-1.78.0-beta`, which `is_dylib` function cannot determine as it only looks whether files are ending with ".so" or not.
This change resolves this problem by no longer doing that ".so" check, as we need all files from the stage0/lib as they are all dependency of rustc anyway.
Fixes#122913
With the LLVM 18 upgrade, the name of the LLVM library has been changed to something like
`libLLVM.so.18.1-rust-1.78.0-beta`, which `is_dylib` function cannot determine as it only
looks whether files are ending with ".so" or not.
This change resolves this problem by no longer doing that ".so" check, as we need all files
from the stage0/lib as they are all dependency of rustc anyway.
Signed-off-by: onur-ozkan <work@onurozkan.dev>
fix(bootstrap/dist): use versioned dirs when vendoring
Currently, if you attempt to run ui tests in a vendored build, you will
see this failure
```
---- [ui] tests/ui/issues/issue-21763.rs stdout ----
diff of stderr:
8 = note: required because it appears within the type `(Rc<()>, Rc<()>)`
9 = note: required for `hashbrown::raw::RawTable<(Rc<()>, Rc<()>)>` to implement `Send`
10 note: required because it appears within the type `hashbrown::map::HashMap<Rc<()>, Rc<()>, RandomState>`
- --> $HASHBROWN_SRC_LOCATION
+ --> /rust/deps/hashbrown/src/map.rs:190:12
12 note: required because it appears within the type `HashMap<Rc<()>, Rc<()>>`
13 --> $SRC_DIR/std/src/collections/hash/map.rs:LL:COL
14 note: required by a bound in `foo`
```
This happens because the code that attempts to remap
`HASHBROWN_SRC_LOCATION` expects it to be under `hashbrown-$version`,
which is the case in a normal cargo registry, but not when vendoring, where
by default crates may not have the version in their directory name.
This change passes `--versioned-dirs` to `cargo vendor` to enforce that
every crate includes the version in the subdir name, which fixes the ui
test and brings `--enable-vendor` builds closer to normal ones.
Fix nix patching for LLVM 18
LLVM 18 now ships `libLLVM*.so.*`, so `.so` is not the sole extension anymore, which breaks the dylib detection. Oops! Adjust it to only search for `.so` somewhere.
fixes#122906
The dead_code lint was previously eroneously missing this dead code.
Since this lint bug has been fixed, the unused field need to be removed
or marked as `#[allow(dead_code)]`.
Given that this struct is deserialized without #[serde(deny_unknown_fields)]
it is ok to simply delete the never read fields.
LLVM 18 now ships `libLLVM*.so.*`, so `.so` is not the sole extension
anymore, which breaks the dylib detection. Oops! Adjust it to only
search for `.so` somewhere.
Currently, if you attempt to run ui tests in a vendored build, you will
see this failure
```
---- [ui] tests/ui/issues/issue-21763.rs stdout ----
diff of stderr:
8 = note: required because it appears within the type `(Rc<()>, Rc<()>)`
9 = note: required for `hashbrown::raw::RawTable<(Rc<()>, Rc<()>)>` to implement `Send`
10 note: required because it appears within the type `hashbrown::map::HashMap<Rc<()>, Rc<()>, RandomState>`
- --> $HASHBROWN_SRC_LOCATION
+ --> /rust/deps/hashbrown/src/map.rs:190:12
12 note: required because it appears within the type `HashMap<Rc<()>, Rc<()>>`
13 --> $SRC_DIR/std/src/collections/hash/map.rs:LL:COL
14 note: required by a bound in `foo`
```
This happend because the code that attempts to remap
`HASHBROWN_SRC_LOCATION` expects it to be under `hashbrown-$version`,
which is the case in a normal cargo registry, but not when vendor, where
by default crates may not have the version in their directory name.
This change passes `--versioned-dirs` to `cargo vendor` to enforce that
every crate includes the version in the subdir name, which fixes the ui
test and brings `--enable-vendor` builds closer to normal ones.
This is implemented with the freshly-released Wasmtime 19 and should
prevent beta breakage from wasm tests that was observed and fixed
in #122640 again.
various clippy fixes
We need to keep the order of the given clippy lint rules before passing them.
Since clap doesn't offer any useful interface for this purpose out of the box,
we have to handle it manually.
Additionally, this PR makes `-D` rules work as expected. Previously, lint rules were limited to `-W`. By enabling `-D`, clippy began to complain numerous lines in the tree, all of which have been resolved in this PR as well.
Fixes#121481
cc `@matthiaskrgr`
