librustc_back: fix incorrect comment about RUST_TARGET_PATH
The path `/etc/rustc/` is not the default last entry in
RUST_TARGET_PATH. This was in RFC131 but was never implemented in rustc
so it was removed as part of #31117 and rust-lang/rfcs#1473.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
std: Stabilize APIs for the 1.9 release
This commit applies all stabilizations, renamings, and deprecations that the
library team has decided on for the upcoming 1.9 release. All tracking issues
have gone through a cycle-long "final comment period" and the specific APIs
stabilized/deprecated are:
Stable
* `std::panic`
* `std::panic::catch_unwind` (renamed from `recover`)
* `std::panic::resume_unwind` (renamed from `propagate`)
* `std::panic::AssertUnwindSafe` (renamed from `AssertRecoverSafe`)
* `std::panic::UnwindSafe` (renamed from `RecoverSafe`)
* `str::is_char_boundary`
* `<*const T>::as_ref`
* `<*mut T>::as_ref`
* `<*mut T>::as_mut`
* `AsciiExt::make_ascii_uppercase`
* `AsciiExt::make_ascii_lowercase`
* `char::decode_utf16`
* `char::DecodeUtf16`
* `char::DecodeUtf16Error`
* `char::DecodeUtf16Error::unpaired_surrogate`
* `BTreeSet::take`
* `BTreeSet::replace`
* `BTreeSet::get`
* `HashSet::take`
* `HashSet::replace`
* `HashSet::get`
* `OsString::with_capacity`
* `OsString::clear`
* `OsString::capacity`
* `OsString::reserve`
* `OsString::reserve_exact`
* `OsStr::is_empty`
* `OsStr::len`
* `std::os::unix::thread`
* `RawPthread`
* `JoinHandleExt`
* `JoinHandleExt::as_pthread_t`
* `JoinHandleExt::into_pthread_t`
* `HashSet::hasher`
* `HashMap::hasher`
* `CommandExt::exec`
* `File::try_clone`
* `SocketAddr::set_ip`
* `SocketAddr::set_port`
* `SocketAddrV4::set_ip`
* `SocketAddrV4::set_port`
* `SocketAddrV6::set_ip`
* `SocketAddrV6::set_port`
* `SocketAddrV6::set_flowinfo`
* `SocketAddrV6::set_scope_id`
* `<[T]>::copy_from_slice`
* `ptr::read_volatile`
* `ptr::write_volatile`
* The `#[deprecated]` attribute
* `OpenOptions::create_new`
Deprecated
* `std::raw::Slice` - use raw parts of `slice` module instead
* `std::raw::Repr` - use raw parts of `slice` module instead
* `str::char_range_at` - use slicing plus `chars()` plus `len_utf8`
* `str::char_range_at_reverse` - use slicing plus `chars().rev()` plus `len_utf8`
* `str::char_at` - use slicing plus `chars()`
* `str::char_at_reverse` - use slicing plus `chars().rev()`
* `str::slice_shift_char` - use `chars()` plus `Chars::as_str`
* `CommandExt::session_leader` - use `before_exec` instead.
Closes#27719
cc #27751 (deprecating the `Slice` bits)
Closes#27754Closes#27780Closes#27809Closes#27811Closes#27830Closes#28050Closes#29453Closes#29791Closes#29935Closes#30014Closes#30752Closes#31262
cc #31398 (still need to deal with `before_exec`)
Closes#31405Closes#31572Closes#31755Closes#31756
This commit applies all stabilizations, renamings, and deprecations that the
library team has decided on for the upcoming 1.9 release. All tracking issues
have gone through a cycle-long "final comment period" and the specific APIs
stabilized/deprecated are:
Stable
* `std::panic`
* `std::panic::catch_unwind` (renamed from `recover`)
* `std::panic::resume_unwind` (renamed from `propagate`)
* `std::panic::AssertUnwindSafe` (renamed from `AssertRecoverSafe`)
* `std::panic::UnwindSafe` (renamed from `RecoverSafe`)
* `str::is_char_boundary`
* `<*const T>::as_ref`
* `<*mut T>::as_ref`
* `<*mut T>::as_mut`
* `AsciiExt::make_ascii_uppercase`
* `AsciiExt::make_ascii_lowercase`
* `char::decode_utf16`
* `char::DecodeUtf16`
* `char::DecodeUtf16Error`
* `char::DecodeUtf16Error::unpaired_surrogate`
* `BTreeSet::take`
* `BTreeSet::replace`
* `BTreeSet::get`
* `HashSet::take`
* `HashSet::replace`
* `HashSet::get`
* `OsString::with_capacity`
* `OsString::clear`
* `OsString::capacity`
* `OsString::reserve`
* `OsString::reserve_exact`
* `OsStr::is_empty`
* `OsStr::len`
* `std::os::unix::thread`
* `RawPthread`
* `JoinHandleExt`
* `JoinHandleExt::as_pthread_t`
* `JoinHandleExt::into_pthread_t`
* `HashSet::hasher`
* `HashMap::hasher`
* `CommandExt::exec`
* `File::try_clone`
* `SocketAddr::set_ip`
* `SocketAddr::set_port`
* `SocketAddrV4::set_ip`
* `SocketAddrV4::set_port`
* `SocketAddrV6::set_ip`
* `SocketAddrV6::set_port`
* `SocketAddrV6::set_flowinfo`
* `SocketAddrV6::set_scope_id`
* `<[T]>::copy_from_slice`
* `ptr::read_volatile`
* `ptr::write_volatile`
* The `#[deprecated]` attribute
* `OpenOptions::create_new`
Deprecated
* `std::raw::Slice` - use raw parts of `slice` module instead
* `std::raw::Repr` - use raw parts of `slice` module instead
* `str::char_range_at` - use slicing plus `chars()` plus `len_utf8`
* `str::char_range_at_reverse` - use slicing plus `chars().rev()` plus `len_utf8`
* `str::char_at` - use slicing plus `chars()`
* `str::char_at_reverse` - use slicing plus `chars().rev()`
* `str::slice_shift_char` - use `chars()` plus `Chars::as_str`
* `CommandExt::session_leader` - use `before_exec` instead.
Closes#27719
cc #27751 (deprecating the `Slice` bits)
Closes#27754Closes#27780Closes#27809Closes#27811Closes#27830Closes#28050Closes#29453Closes#29791Closes#29935Closes#30014Closes#30752Closes#31262
cc #31398 (still need to deal with `before_exec`)
Closes#31405Closes#31572Closes#31755Closes#31756
The path `/etc/rustc/` is not the default last entry in
RUST_TARGET_PATH. This was in RFC131 but was never implemented in rustc
so it was removed as part of #31117 and rust-lang/rfcs#1473.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Automated conversion using the untry tool [1] and the following command:
```
$ find -name '*.rs' -type f | xargs untry
```
at the root of the Rust repo.
[1]: https://github.com/japaric/untry
Removes all unstable and deprecated APIs prior to the 1.8 release. All APIs that
are deprecated in the 1.8 release are sticking around for the rest of this
cycle.
Some notable changes are:
* The `dynamic_lib` module was moved into `rustc_back` as the compiler still
relies on a few bits and pieces.
* The `DebugTuple` formatter now special-cases an empty struct name with only
one field to append a trailing comma.
rustc: Add an i586-pc-windows-msvc target
Similarly to #31629 where an i586-unknown-linux-gnu target was added, there is
sometimes a desire to compile for x86 Windows as well where SSE2 is disabled.
This commit mirrors the i586-unknown-linux-gnu target and simply adds a variant
for Windows as well.
This is motivated by a recent [Gecko bug][ff] where crashes were seen on 32-bit
Windows due to users having CPUs that don't support SSE2 instructions. It was
requested that we could have non-SSE2 builds of the standard library available
so they could continue to use vanilla releases and nightlies.
[ff]: https://bugzilla.mozilla.org/show_bug.cgi?id=1253202
Similarly to #31629 where an i586-unknown-linux-gnu target was added, there is
sometimes a desire to compile for x86 Windows as well where SSE2 is disabled.
This commit mirrors the i586-unknown-linux-gnu target and simply adds a variant
for Windows as well.
This is motivated by a recent [Gecko bug][ff] where crashes were seen on 32-bit
Windows due to users having CPUs that don't support SSE2 instructions. It was
requested that we could have non-SSE2 builds of the standard library available
so they could continue to use vanilla releases and nightlies.
[ff]: https://bugzilla.mozilla.org/show_bug.cgi?id=1253202
A whole bunch of stuff gets folded into struct handling! Plus, removes
an ugly hack from trans and accidentally fixes a bug with constructing
ranges from references (see later commits with tests).
.copy_from_slice() does the same job of .clone_from_slice(), but the
former is explicitly for Copy elements and calls `memcpy` directly, and
thus is it efficient without optimization too.
The `vfp2` option was a leftover from `armv6` compatibility features of the original armhf target.
Gcc defaults to `vfp3`on `armv7` hard-float linux systems so we should make it the default for rustc too.
The initial purpose is to workaround the LLVM bug
https://llvm.org/bugs/show_bug.cgi?id=26554 for OpenBSD.
By default, the `cpu' is defined to `generic`. But with a 64bit
processor, the optimization for `generic` will use invalid asm code as
NOP (the generated code for NOP isn't a NOP).
According to #20777, "x86-64" is the right thing to do for x86_64
builds.
Closes: #31363
This PR disallows non-inline modules without path annotations that are either in a block or in an inline module whose containing file is not a directory owner (fixes#29765).
This is a [breaking-change].
r? @nikomatsakis
This PR should make it easier to create a baseline x86 compiler as well as make cross-compilation possible through a separate set of rlibs.
Plus, a few Linux distributions (e.g. Debian) have voiced interest in having this target available.
When building with Cargo we need to detect `feature = "jemalloc"` to enable
jemalloc, so propagate this same change to the build system to pass the right
`--cfg` argument.
The compiler currently vendors its own version of "llvm-ar" (not literally the
binary but rather the library support) and uses it for all major targets by
default (e.g. everything defined in `src/librustc_back/target`). All custom
target specs, however, still search for an `ar` tool by default. This commit
changes this default behavior to using the internally bundled llvm-ar with the
GNU format.
Currently all targets use the GNU format except for OSX which uses the BSD
format (surely makes sense, right?), and custom targets can change the format
via the `archive-format` key in custom target specs.
I suspect that we can outright remove support for invoking an external `ar`
utility, but I figure for now there may be some crazy target relying on that so
we should leave support in for now.
Both of these targets have jemalloc disabled unconditionally right now, so using
`maybe_jemalloc` here isn't right. This fixes the case where a Linux compiler
(which is itself configured to use jemalloc) attempts to cross-compile to MinGW,
causing it to try to find an `alloc_jemalloc` crate (and failing).
This tells trans:🔙:write not to LLVM codegen to create .o
files but to put LLMV bitcode in .o files.
Emscripten's emcc supports .o in this format, and this is,
I think, slightly easier than making rlibs work without .o
files.
Backtraces, and the compilation of libbacktrace for asmjs, are disabled.
This port doesn't use jemalloc so, like pnacl, it disables jemalloc *for all targets*
in the configure file.
It disables stack protection.
This pull request adds support for [Illumos](http://illumos.org/)-based operating systems: SmartOS, OpenIndiana, and others. For now it's x86-64 only, as I'm not sure if 32-bit installations are widespread. This PR is based on #28589 by @potatosalad, and also closes#21000, #25845, and #25846.
Required changes in libc are already merged: https://github.com/rust-lang-nursery/libc/pull/138
Here's a snapshot required to build a stage0 compiler:
https://s3-eu-west-1.amazonaws.com/nbaksalyar/rustc-sunos-snapshot.tar.gz
It passes all checks from `make check`.
There are some changes I'm not quite sure about, e.g. macro usage in `src/libstd/num/f64.rs` and `DirEntry` structure in `src/libstd/sys/unix/fs.rs`, so any comments on how to rewrite it better would be greatly appreciated.
Also, LLVM configure script might need to be patched to build it successfully, or a pre-built libLLVM should be used. Some details can be found here: https://llvm.org/bugs/show_bug.cgi?id=25409
Thanks!
r? @brson
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
Currently any compilation to MIPS spits out the warning:
'generic' is not a recognized processor for this target (ignoring processor)
Doesn't make for a great user experience! We don't encounter this in the normal
bootstrap because the cpu/feature set are set by the makefiles. Instead let's
just propagate these to the defaults for the entire target all the time (still
overridable from the command line) and prevent warnings from being emitted by
default.
