Lint on redundant trailing semicolon after item
We now lint on code like this:
```rust
fn main() {
fn foo() {};
struct Bar {};
}
```
Previously, this caused warnings in Cargo, so it was disabled.
Add regression test for #80375
This will also make sure that #80375 is handled if #79135 has to be reverted (which won't happen 🤞).
Closes#80375.
r? `@lcnr`
Suggest fn ptr rather than fn item and suggest to use `Fn` trait bounds rather than the unique closure type in E0121
Previously, using `_` as a return type in a function that returned a function/closure would provide a diagnostic that would cause a papercut. For example:
```rust
fn f() -> i32 { 0 }
fn fn_ptr() -> _ { f }
fn closure() -> _ { || 0 }
```
would result in this diagnostic:
```rust
error[E0121]: the type placeholder `_` is not allowed within types on item signatures
--> <anon>:2:16
|
2 | fn fn_ptr() -> _ { f }
| ^
| |
| not allowed in type signatures
| help: replace with the correct return type: `fn() -> i32 {f}`
error[E0121]: the type placeholder `_` is not allowed within types on item signatures
--> <anon>:3:17
|
3 | fn closure() -> _ { || 0 }
| ^
| |
| not allowed in type signatures
| help: replace with the correct return type: `[closure@<anon>:3:21: 3:25]`
error: aborting due to 2 previous errors
For more information about this error, try `rustc --explain E0121`.
```
As can be seen, it was suggested to use the function definition return type `fn() -> i32 { f }` which is not valid syntax as a return type. Additionally, closures cause a papercut as unique closure types (notated in this case as `[closure@<anon>:3:21: 3:25]`) are not valid syntax either.
Instead, this PR implements this version of the diagnostic (this example is for the same code featured above):
```rust
error[E0121]: the type placeholder `_` is not allowed within types on item signatures
--> <anon>:2:16
|
2 | fn fn_ptr() -> _ { f }
| ^
| |
| not allowed in type signatures
| help: replace with the correct return type: `fn() -> i32`
error[E0121]: the type placeholder `_` is not allowed within types on item signatures
--> <anon>:3:17
|
3 | fn closure() -> _ { || 0 }
| ^ not allowed in type signatures
|
= help: consider using an `Fn`, `FnMut`, or `FnOnce` trait bound
= note: for more information on `Fn` traits and closure types, see https://doc.rust-lang.org/book/ch13-01-closures.html
error: aborting due to 2 previous errors
For more information about this error, try `rustc --explain E0121`.
```
As can be seen in this diagnostic, the papercut for returning a function item is fixed by suggesting the usage of a function pointer as the return type. As for closures, it's suggested to use an `Fn`, `FnMut`, or `FnOnce` trait bound (with further reading on closures and `Fn` traits in *The Book* for beginners). I did not implement a suggestion to use `impl Fn() -> i32` syntax as that was out-of-scope for my abilities at the moment, therefore someone in the future may want to implement that. Also, it's possible to use either `impl Trait` syntax, generics, or generics with a `where` clause, and some users may not want to use `impl Trait` syntax for their own reasons.
This PR fixes#80179.
Fix intra-doc links for non-path primitives
This does *not* currently work for associated items that are
auto-implemented by the compiler (e.g. `never::eq`), because they aren't
present in the source code. I plan to fix this in a follow-up PR.
Fixes https://github.com/rust-lang/rust/issues/63351 using the approach mentioned in https://github.com/rust-lang/rust/issues/63351#issuecomment-683352130.
r? `@Manishearth`
cc `@petrochenkov` - this makes `rustc_resolve::Res` public, is that ok? I'd just add an identical type alias in rustdoc if not, which seems a waste.
Prevent caching normalization results with a cycle
When normalizing a projection which results in a cycle, we would cache the result of `project_type` without the nested obligations (because they're not needed for inference). This would result in the nested obligations only being handled once in fulfill, which would avoid the cycle error. `get_paranoid_cache_value_obligation` used to add an obligation that resulted in a cycle in this case previously, but was removed by #73905.
This PR makes the projection cache not cache the value of a projection if it was ever normalized in a cycle (except in a snapshot that's rolled back).
Fixes#79714.
r? `@nikomatsakis`
Exclude unnecessary info from CodegenResults
`foreign_module` and `wasm_import_module` are not needed for linking, and hence can be removed from CodegenResults.
Fixes#77857
Implemented a compiler diagnostic for move async mistake
Fixes#79694
First time contributing, so I hope I'm doing everything right.
(If not, please correct me!)
This code performs a check when a move capture clause is parsed. The check is to detect if the user has reversed the async move keywords and to provide a diagnostic with a suggestion to fix it.
Checked code:
```rust
fn main() {
move async { };
}
```
Previous output:
```txt
PS C:\Repos\move_async_test> cargo build
Compiling move_async_test v0.1.0 (C:\Repos\move_async_test)
error: expected one of `|` or `||`, found keyword `async`
--> src\main.rs:2:10
|
2 | move async { };
| ^^^^^ expected one of `|` or `||`
error: aborting due to previous error
error: could not compile `move_async_test`
```
New output:
```txt
PS C:\Repos\move_async_test> cargo +dev build
Compiling move_async_test v0.1.0 (C:\Repos\move_async_test)
error: the order of `move` and `async` is incorrect
--> src\main.rs:2:13
|
2 | let _ = move async { };
| ^^^^^^^^^^
|
help: try switching the order
|
2 | let _ = async move { };
| ^^^^^^^^^^
error: aborting due to previous error
error: could not compile `move_async_test`
```
Is there a file/module where these kind of things are tested?
Would love some feedback 😄
Remap instrument-coverage line numbers in doctests
This uses the `SourceMap::doctest_offset_line` method to re-map line
numbers from doctests. Remapping columns is not yet done, and rustdoc
still does not output the correct filename when running doctests in a
workspace.
Part of #79417 although I dont consider that fixed until both filenames
and columns are mapped correctly.
r? `@richkadel`
I might jump on zulip the comming days. Still need to figure out how to properly write tests for this, and deal with other doctest issues in the meantime.
Move tooltips messages out of html
First thing first: nothing in the output has changed. You still have the "i" on the left of code blocks examples when they have `ignore`, `compile_fail`, `should_panic` and `edition`. The behavior also remains the same: when you hover the "i", you have the corresponding message showing up.
So now, why this PR then? I realized recently that we were actually generating those messages into the HTML every time whereas all messages are the same (except for the edition ones, I'll come back to it later). So instead of generating more content, I simply moved it inside the CSS thanks to pseudo elements (`::before` and `::after`). The message is now inside `::after` and we use the `::before` to have the small triangle on the left of the message. So now, we have less HTML generated which is seems pretty nice.
So now, back to the `edition` change: the message is globally the same, but the "edition" itself can be different (2015 or 2018 currently, I expect 2021 to arrive not too far in the future). So the only difference for it is that I added a new attribute on the tooltip called `edition` which contains this information. Then, the `::after` uses it inside its `content` (you can get the content of an element's attribute by using `attr` and concat different strings by simply having them after the other).
Don't hesitate if a part of my explanations isn't clear.
r? `@jyn514`
Deprecate atomic compare_and_swap method
Finish implementing [RFC 1443](https://github.com/rust-lang/rfcs/blob/master/text/1443-extended-compare-and-swap.md) (https://github.com/rust-lang/rfcs/pull/1443).
It was decided to deprecate `compare_and_swap` [back in Rust 1.12 already](https://github.com/rust-lang/rust/issues/31767#issuecomment-215903038). I can't find any info about that decision being reverted. My understanding is just that it has been forgotten. If there has been a decision on keeping `compare_and_swap` then it's hard to find, and even if this PR does not go through it can act as a place where people can find out about the decision being reverted.
Atomic operations are hard to understand, very hard. And it does not help that there are multiple similar methods to do compare and swap with. They are so similar that for a reader it might be hard to understand the difference. This PR aims to make that simpler by finally deprecating `compare_and_swap` which is essentially just a more limited version of `compare_exchange`. The documentation is also updated (according to the RFC text) to explain the differences a bit better.
Even if we decide to not deprecate `compare_and_swap`. I still think the documentation for the atomic operations should be improved to better describe their differences and similarities. And the documentation can be written nicer than the PR currently proposes, but I wanted to start somewhere. Most of it is just copied from the RFC.
The documentation for `compare_exchange` and `compare_exchange_weak` indeed describe how they work! The problem is that they are more complex and harder to understand than `compare_and_swap`. So for someone who does not fully grasp this they might fall back to using `compare_and_swap`. Making the documentation outline the similarities and differences might build a bridge for people so they can cross over to the more powerful and sometimes more efficient operations.
The conversions I do to avoid the `std` internal deprecation errors are very straight forward `compare_and_swap -> compare_exchange` changes where the orderings are just using the mapping in the new documentation. Only in one place did I use `compare_exchange_weak`. This can probably be improved further. But the goal here was not for those operations to be perfect. Just to not get worse and to allow the deprecation to happen.
Remove redundant test
Remove ignored test. This test can also be found at src/test/rustdoc-ui/intra-doc/double-anchor.rs and the second version isn't ignored.
r? ``@jyn514``
This does *not* currently work for associated items that are
auto-implemented by the compiler (e.g. `never::eq`), because they aren't
present in the source code. I plan to fix this in a follow-up PR.
Rename `overlapping_patterns` lint
As discussed in https://github.com/rust-lang/rust/issues/65477. I also tweaked a few things along the way.
r? `@varkor`
`@rustbot` modify labels: +A-exhaustiveness-checking
Acknowledge that `[CONST; N]` is stable
When `const_in_array_repeat_expressions` (RFC 2203) got unstably implemented as part of https://github.com/rust-lang/rust/pull/61749, accidentally, the special case of repeating a *constant* got stabilized immediately. That is why the following code works on stable:
```rust
const EMPTY: Vec<i32> = Vec::new();
pub const fn bar() -> [Vec<i32>; 2] {
[EMPTY; 2]
}
fn main() {
let x = bar();
}
```
In contrast, if we had written `[expr; 2]` for some expression that is not *literally* a constant but could be evaluated at compile-time (e.g. `(EMPTY,).0`), this would have failed.
We could take back this stabilization as it was clearly accidental. However, I propose we instead just officially accept this and stabilize a small subset of RFC 2203, while leaving the more complex case of general expressions that could be evaluated at compile-time unstable. Making that case work well is pretty much blocked on inline `const` expressions (to avoid relying too much on [implicit promotion](https://github.com/rust-lang/const-eval/blob/master/promotion.md)), so it could take a bit until it comes to full fruition. `[CONST; N]` is an uncontroversial subset of this feature that has no semantic ambiguities, does not rely on promotion, and basically provides the full expressive power of RFC 2203 but without the convenience (people have to define constants to repeat them, possibly using associated consts if generics are involved).
Well, I said "no semantic ambiguities", that is only almost true... the one point I am not sure about is `[CONST; 0]`. There are two possible behaviors here: either this is equivalent to `let x = CONST; [x; 0]`, or it is a NOP (if we argue that the constant is never actually instantiated). The difference between the two is that if `CONST` has a destructor, it should run in the former case (but currently doesn't, due to https://github.com/rust-lang/rust/issues/74836); but should not run if it is considered a NOP. For regular `[x; 0]` there seems to be consensus on running drop (there isn't really an alternative); any opinions for the `CONST` special case? Should this instantiate the const only to immediately run its destructors? That seems somewhat silly to me. After all, the `let`-expansion does *not* work in general, for `N > 1`.
Cc `@rust-lang/lang` `@rust-lang/wg-const-eval`
Cc https://github.com/rust-lang/rust/issues/49147
Ran the tidy check
Following the diagnostic guide better
Diagnostic generation is now relegated to its own function in the diagnostics module.
Added tests
Fixed the ui test
Fix pretty printing an AST representing `&(mut ident)`
The PR fixes a misguiding help diagnostic in the parser that I reported in #80186. I discovered that the parsers recovery and reporting logic was correct but the pretty printer produced wrong code for the example. (Details in https://github.com/rust-lang/rust/issues/80186#issuecomment-748498676)
Example:
```rust
#![allow(unused_variables)]
fn main() {
let mut &x = &0;
}
```
The AST fragment
`PatKind::Ref(PatKind::Ident(BindingMode::ByValue(Mutability::Mut), ..), Mutability::Not)`
was printed to be `&mut ident`. But this wouldn't round trip through parsing again, because then it would be:
`PatKind::Ref(PatKind::Ident(BindingMode::ByValue(Mutability::Not), ..), Mutability::Mut)`
Now the pretty-printer prints `&(mut ident)`. Reparsing that code results in the AST fragment
`PatKind::Ref(PatKind::Paren(PatKind::Ident(BindingMode::ByValue(Mutability::Mut), ..)), Mutability::Not)`
which I think should behave like the original pattern.
Old diagnostic:
```
error: `mut` must be attached to each individual binding
--> src/main.rs:3:9
|
3 | let mut &x = &0;
| ^^^^^^ help: add `mut` to each binding: `&mut x`
|
= note: `mut` may be followed by `variable` and `variable @ pattern`
```
New diagnostic:
```
error: `mut` must be attached to each individual binding
--> src/main.rs:3:9
|
3 | let mut &x = &0;
| ^^^^^^ help: add `mut` to each binding: `&(mut x)`
|
= note: `mut` may be followed by `variable` and `variable @ pattern`
```
Fixes#80186
Handle desugaring in impl trait bound suggestion
Fixes#79843.
When an associated type of a generic function parameter needs extra bounds, the diagnostics may suggest replacing an `impl Trait` with a named type parameter so that it can be referenced in the where clause. On stable and nightly, the suggestion can be malformed, for instance transforming:
```rust
async fn run(_: &(), foo: impl Foo) -> std::io::Result<()>
```
Into:
```rust
async fn run(_: &, F: Foo(), foo: F) -> std::io::Result<()> where <F as Foo>::Bar: Send
^^^^^^^^ ^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^
```
Where we want something like:
```rust
async fn run<F: Foo>(_: &(), foo: F) -> std::io::Result<()> where <F as Foo>::Bar: Send
^^^^^^^^ ^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^
```
The problem is that the elided lifetime of `&()` is added as a generic parameter when desugaring the async fn; the suggestion code sees this as an existing generic parameter and tries to use its span as an anchor to inject `F` into the parameter list. There doesn't seem to be an entirely principled way to check which generic parameters in the HIR were explicitly named in the source, so this commit changes the heuristics when generating the suggestion to only consider type parameters whose spans are contained within the span of the `Generics` when determining how to insert an additional type parameter into the declaration. (And to be safe it also excludes parameters whose spans are marked as originating from desugaring, although that doesn't seem to handle this elided lifetime.)
When normalizing a projection which results in a cycle, we would
cache the result of `project_type` without the nested obligations
(because they're not needed for inference). This would result in
the nested obligations only being handled once in fulfill, which
would avoid the cycle error.
Fixes#79714, a regresion from #79305 caused by the removal of
`get_paranoid_cache_value_obligation`.
Turn quadratic time on number of impl blocks into linear time
Previously, if you had a lot of inherent impl blocks on a type like:
```Rust
struct Foo;
impl Foo { fn foo_1() {} }
// ...
impl Foo { fn foo_100_000() {} }
```
The compiler would be very slow at processing it, because
an internal algorithm would run in O(n^2), where n is the number
of impl blocks. Now, we add a new algorithm that allocates but
is faster asymptotically.
Comparing rustc nightly with a local build of rustc as of this PR (results in seconds):
| N | real time before | real time after |
| - | - | - |
| 4_000 | 0.57 | 0.46 |
| 8_000 | 1.31 | 0.84 |
| 16_000 | 3.56 | 1.69 |
| 32_000 | 10.60 | 3.73 |
I've tuned up the numbers to make the effect larger than the startup noise of rustc, but the asymptotic difference should hold for smaller n as well.
Note: current state of the PR omits error messages if there are other errors present already. For now, I'm mainly interested in a perf run to study whether this issue is present at all. Please queue one for this PR. Thanks!
