asm: Add a kreg0 register class on x86 which includes k0
Previously we only exposed a kreg register class which excludes the k0
register since it can't be used in many instructions. However k0 is a
valid register and we need to have a way of marking it as clobbered for
clobber_abi.
Fixes#94977
Previously we only exposed a kreg register class which excludes the k0
register since it can't be used in many instructions. However k0 is a
valid register and we need to have a way of marking it as clobbered for
clobber_abi.
Fixes#94977
Remove `--extern-location` and all associated code
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
Improved diagnostic on failure to meet send bound on future in a foreign crate
Provide a better diagnostic on failure to meet send bound on futures in a foreign crate.
fixes#78543
show suggestion to replace generic bounds with associated types in more cases
Moves the hint to replace generic parameters with associated type bounds from the "not all associated type bounds are specified"(`E0191`) to "to many generic type parameters provided"(`E0107`).
Since `E0191` is only emitted in places where all associated types must be specified (when creating `dyn` types), the suggesting is currently not shown for other generic type uses (such as in generic type bounds). With this change the suggesting is always emitted when the number of excess generic parameters matches the number of unbound associated types.
Main motivation for the change was a lack of useful suggesting when doing
```rust
fn foo<I: Iterator<usize>>(i: I) {}
```
Add codegen tests for additional cases where noop iterators get optimized away
Optimizations have improved over time and now LLVM manages to optimize more in-place-collect noop-iterators to O(1) functions. This updates the codegen test to match.
Many but not all cases reported in #79308 work now.
Report undeclared lifetimes during late resolution.
First step in https://github.com/rust-lang/rust/pull/91557
We reuse the rib design of the current resolution framework. Specific `LifetimeRib` and `LifetimeRibKind` types are introduced. The most important variant is `LifetimeRibKind::Generics`, which happens each time we encounter something which may introduce generic lifetime parameters. It can be an item or a `for<...>` binder. The `LifetimeBinderKind` specifies how this rib behaves with respect to in-band lifetimes.
r? `@petrochenkov`
Speed up Vec::clear().
Currently it just calls `truncate(0)`. `truncate()` is (a) not marked as
`#[inline]`, and (b) more general than needed for `clear()`.
This commit changes `clear()` to do the work itself. This modest change
was first proposed in rust-lang#74172, where the reviewer rejected it because
there was insufficient evidence that `Vec::clear()`'s performance
mattered enough to justify the change. Recent changes within rustc have
made `Vec::clear()` hot within `macro_parser.rs`, so the change is now
clearly worthwhile.
Although it doesn't show wins on CI perf runs, this seems to be because they
use PGO. But not all platforms currently use PGO. Also, local builds don't use
PGO, and `truncate` sometimes shows up in an over-represented fashion in local
profiles. So local profiling will be made easier by this change.
Note that this will also benefit `String::clear()`, because it just
calls `Vec::clear()`.
Finally, the commit removes the `vec-clear.rs` codegen test. It was
added in #52908. From before then until now, `Vec::clear()` just called
`Vec::truncate()` with a zero length. The body of Vec::truncate() has
changed a lot since then. Now that `Vec::clear()` is doing actual work
itself, and not just calling `Vec::truncate()`, it's not surprising that
its generated code includes a load and an icmp. I think it's reasonable
to remove this test.
r? `@m-ou-se`
Strict provenance lint diagnostics improvements
Use `multipart_suggestion` instead of `span_suggestion` and getting a snippet for the expression. Also don't suggest unnecessary parenthesis in `lossy_provenance_casts`.
cc ``@estebank``
``@rustbot`` label A-diagnostics
Parse inner attributes on inline const block
According to https://github.com/rust-lang/rust/pull/84414#issuecomment-826150936, inner attributes are intended to be supported *"in all containers for statements (or some subset of statements)"*.
This PR adds inner attribute parsing and pretty-printing for inline const blocks (https://github.com/rust-lang/rust/issues/76001), which contain statements just like an unsafe block or a loop body.
```rust
let _ = const {
#![allow(...)]
let x = ();
x
};
```
clarify doc(cfg) wording
The current "This is supported" wording implies that it's possible to
still use the item on other configurations, but in an unsupported way.
Changing this to "Available" removes this ambiguity.
resolve: Create dummy bindings for all unresolved imports
Apparently such bindings weren't previously created for all unresolved imports, causing issues like https://github.com/rust-lang/rust/issues/95879.
In this PR I'm trying to create such dummy bindings in a more centralized way by calling `import_dummy_binding` once for all imports in `finalize_imports`.
Fixes https://github.com/rust-lang/rust/issues/95879.
Adding diagnostic data on generators to the crate metadata and using it to provide
a better diagnostic on failure to meet send bound on futures originated from a foreign crate
Rollup of 9 pull requests
Successful merges:
- #93969 (Only add codegen backend to dep info if -Zbinary-dep-depinfo is used)
- #94605 (Add missing links in platform support docs)
- #95372 (make unaligned_references lint deny-by-default)
- #95859 (Improve diagnostics for unterminated nested block comment)
- #95961 (implement SIMD gather/scatter via vector getelementptr)
- #96004 (Consider lifetimes when comparing types for equality in MIR validator)
- #96050 (Remove some now-dead code that was only relevant before deaggregation.)
- #96070 ([test] Add test cases for untested functions for BTreeMap)
- #96099 (MaybeUninit array cleanup)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Better method call error messages
Rebase/continuation of #71827
~Based on #92360~
~Based on #93118~
There's a decent description in #71827 that I won't copy here (for now at least)
In addition to rebasing, I've tried to restore most of the original suggestions for invalid arguments. Unfortunately, this does make some of the errors a bit verbose. To fix this will require a bit of refactoring to some of the generalized error suggestion functions, and I just don't have the time to go into it right now.
I think this is in a state that the error messages are overall better than before without a reduction in the suggestions given.
~I've tried to split out some of the easier and self-contained changes into separate commits (mostly in #92360, but also one here). There might be more than can be done here, but again just lacking time.~
r? `@estebank` as the original reviewer of #71827
This attempts to bring better error messages to invalid method calls, by applying some heuristics to identify common mistakes.
The algorithm is inspired by Levenshtein distance and longest common sub-sequence. In essence, we treat the types of the function, and the types of the arguments you provided as two "words" and compute the edits to get from one to the other.
We then modify that algorithm to detect 4 cases:
- A function input is missing
- An extra argument was provided
- The type of an argument is straight up invalid
- Two arguments have been swapped
- A subset of the arguments have been shuffled
(We detect the last two as separate cases so that we can detect two swaps, instead of 4 parameters permuted.)
It helps to understand this argument by paying special attention to terminology: "inputs" refers to the inputs being *expected* by the function, and "arguments" refers to what has been provided at the call site.
The basic sketch of the algorithm is as follows:
- Construct a boolean grid, with a row for each argument, and a column for each input. The cell [i, j] is true if the i'th argument could satisfy the j'th input.
- If we find an argument that could satisfy no inputs, provided for an input that can't be satisfied by any other argument, we consider this an "invalid type".
- Extra arguments are those that can't satisfy any input, provided for an input that *could* be satisfied by another argument.
- Missing inputs are inputs that can't be satisfied by any argument, where the provided argument could satisfy another input
- Swapped / Permuted arguments are identified with a cycle detection algorithm.
As each issue is found, we remove the relevant inputs / arguments and check for more issues. If we find no issues, we match up any "valid" arguments, and start again.
Note that there's a lot of extra complexity:
- We try to stay efficient on the happy path, only computing the diagonal until we find a problem, and then filling in the rest of the matrix.
- Closure arguments are wrapped in a tuple and need to be unwrapped
- We need to resolve closure types after the rest, to allow the most specific type constraints
- We need to handle imported C functions that might be variadic in their inputs.
I tried to document a lot of this in comments in the code and keep the naming clear.
implement SIMD gather/scatter via vector getelementptr
Fixes https://github.com/rust-lang/portable-simd/issues/271
However, I don't *really* know what I am doing here... Cc ``@workingjubilee`` ``@calebzulawski``
I didn't do anything for cranelift -- ``@bjorn3`` not sure if it's okay for that backend to temporarily break. I'm happy to cherry-pick a patch that adds cranelift support. :)
Improve diagnostics for unterminated nested block comment
close#95283
(This is my first time try to messing around with rust compiler and might get a lot of things wrong... 🙇 )
make unaligned_references lint deny-by-default
This lint has been warn-by-default for a year now (since https://github.com/rust-lang/rust/pull/82525), so I think it is time to crank it up a bit. Code that triggers the lint causes UB (without `unsafe`) when executed, so we really don't want people to write code like this.
Only add codegen backend to dep info if -Zbinary-dep-depinfo is used
I am currently migrating the cg_clif build system from using a binary linked to the codegen backend as rustc replacement to passing `-Zcodegen-backend` instead. Without this PR this would force cargo to rebuild the sysroot on any change to the codegen backend even if I explicitly specify that I want it to be preserved, which would make development of cg_clif a lot slower. If you still want to have changes to the codegen backend invalidate the cargo build cache you can explicitly specify `-Zbinary-dep-depinfo`.
cc ``@eddyb`` as the codegen backend was initially added to the depinfo for rust-gpu.
Implement sym operands for global_asm!
Tracking issue: #93333
This PR is pretty much a complete rewrite of `sym` operand support for inline assembly so that the same implementation can be shared by `asm!` and `global_asm!`. The main changes are:
- At the AST level, `sym` is represented as a special `InlineAsmSym` AST node containing a path instead of an `Expr`.
- At the HIR level, `sym` is split into `SymStatic` and `SymFn` depending on whether the path resolves to a static during AST lowering (defaults to `SynFn` if `get_early_res` fails).
- `SymFn` is just an `AnonConst`. It runs through typeck and we just collect the resulting type at the end. An error is emitted if the type is not a `FnDef`.
- `SymStatic` directly holds a path and the `DefId` of the `static` that it is pointing to.
- The representation at the MIR level is mostly unchanged. There is a minor change to THIR where `SymFn` is a constant instead of an expression.
- At the codegen level we need to apply the target's symbol mangling to the result of `tcx.symbol_name()` depending on the target. This is done by calling the LLVM name mangler, which handles all of the details.
- On Mach-O, all symbols have a leading underscore.
- On x86 Windows, different mangling is used for cdecl, stdcall, fastcall and vectorcall.
- No mangling is needed on other platforms.
r? `@nagisa`
cc `@eddyb`
only downgrade selection Error -> Ambiguous if type error is in predicate
That is, we don't care if there's a TypeError type in the ParamEnv.
Fixes#95408
remove find_use_placement
A more robust solution to finding where to place use suggestions was added in #94584.
The algorithm uses the AST to find the span for the suggestion so we pass this span
down to the HIR during lowering and use it instead of calling `find_use_placement`
Fixes#94941
Check var scope if it exist
Fixes#92893.
Added helper function to check the scope of a variable, if it doesn't have a scope call delay_span_bug, which avoids us trying to get a block/scope that doesn't exist.
Had to increase `ROOT_ENTRY_LIMIT` was getting tidy error
Create (unstable) 2024 edition
[On Zulip](https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Deprecating.20macro.20scoping.20shenanigans/near/272860652), there was a small aside regarding creating the 2024 edition now as opposed to later. There was a reasonable amount of support and no stated opposition.
This change creates the 2024 edition in the compiler and creates a prelude for the 2024 edition. There is no current difference between the 2021 and 2024 editions. Cargo and other tools will need to be updated separately, as it's not in the same repository. This change permits the vast majority of work towards the next edition to proceed _now_ instead of waiting until 2024.
For sanity purposes, I've merged the "hello" UI tests into a single file with multiple revisions. Otherwise we'd end up with a file per edition, despite them being essentially identical.
````@rustbot```` label +T-lang +S-waiting-on-review
Not sure on the relevant team, to be honest.
Stabilize `derive_default_enum`
This stabilizes `#![feature(derive_default_enum)]`, as proposed in [RFC 3107](https://github.com/rust-lang/rfcs/pull/3107) and tracked in #87517. In short, it permits you to `#[derive(Default)]` on `enum`s, indicating what the default should be by placing a `#[default]` attribute on the desired variant (which must be a unit variant in the interest of forward compatibility).
```````@rustbot``````` label +S-waiting-on-review +T-lang
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
The current "This is supported" wording implies that it's possible to
still use the item on other configurations, but in an unsupported way.
Changing this to "Available" removes this ambiguity.
