Use `target_vendor = "apple"` instead of `target_os = "..."`
Use `target_vendor = "apple"` instead of `all(target_os = "macos", target_os = "ios", target_os = "tvos", target_os = "watchos", target_os = "visionos")`.
The apple targets are quite close to being identical, with iOS, tvOS, watchOS and visionOS being even closer, so using `target_vendor` when possible makes it clearer when something is actually OS-specific, or just Apple-specific.
Note that `target_vendor` will [be deprecated in the future](https://github.com/rust-lang/rust/issues/100343), but not before an alternative (like `target_family = "apple"`) is available.
While doing this, I found various inconsistencies and small mistakes in the standard library, see the commits for details. Will follow-up with an extra PR for a similar issue that need a bit more discussion. EDIT: https://github.com/rust-lang/rust/pull/124494
Since you've talked about using `target_vendor = "apple"` in the past:
r? workingjubilee
CC `@simlay,` `@thomcc`
`@rustbot` label O-macos O-ios O-tvos O-watchos O-visionos
Port repr128-dwarf run-make test to rmake
This PR ports the repr128-dwarf run-make test to rmake, using the `gimli` crate instead of the `llvm-dwarfdump` command.
Note that this PR changes `rmake.rs` files to be compiled with the 2021 edition (previously no edition was passed to `rustc`, meaning they were compiled with the 2015 edition). This means that `panic!("{variable}")` will now work as expected in `rmake.rs` files (there's already a usage in the [wasm-symbols-not-exported test](aca749eefc/tests/run-make/wasm-symbols-not-exported/rmake.rs (L34)) that this will fix).
Tracking issue: #121876
mir-opt tests: rename unit-test -> test-mir-pass
"unit-test" is extremely non-descriptive, no idea how one is supposed to read that and know that this specifies the MIR pass being tested.
Port the 2 `rust-lld` run-make tests to `rmake`
In preparation for finalizing most of the `rust-lld` work, this PR ports the following tests to `rmake`:
- `tests/run-make/rust-lld`
- `tests/run-make/rust-lld-custom-target`
As they use `$(CGREP) -e` I added `regex` as an exported dependency to the `run_make_support` library.
Unfortunately, the most recent versions depend on `memchr` 2.6.0 but it's currently pinned at 2.5.0 in the workspace, and therefore had to settle for the older `regex-1.8.0`.
r? `@jieyouxu`
compiletest ice tracking
see https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/where.20to.20mass-add.20known.20ices.20.2F.20merging.20glacier.20into.20rust/near/429082963
This will allow us to sunset most of https://github.com/rust-lang/glacier
The rustc ices will be tracked directly inside the rust testsuite
There are a couple of .sh tests remaining that I have not ported over yet.
This adds `tests/crashes`, a file inside this directory MUST ice, otherwise it is considered test-fail.
This will be used to track ICEs from glacier and the bugtracker.
When someones pr accidentally fixes one of these ICEs, they can move the test from `crashes` into `ui` for example.
I also added a new tidy lint that warns when a test inside `tests/crashes` does not have a `//@ known-bug: ` line
the env var `COMPILETEST_VERBOSE_CRASHES` can be set to get exit code, stderr and stdout of a crash-test to aid debugging/adding tests.
previously we would explicitly look for exit code 101 and call it a crash,
however in case of stack overflows for example, exit code could differ due to the
process being killed by a signal which is not easy to detect on none-unix.
So now we reject everything that exits with 0 (no error) or 1 (compiler failed to compile code)
and "accept" everyhing else as an internal compiler error.
Add `/System/iOSSupport` to the library search path on Mac Catalyst
On macOS, `/System/iOSSupport` contains iOS frameworks like UIKit, which is the whole idea of Mac Catalyst.
To link to these, we need to explicitly tell the linker about the support library stubs provided in the macOS SDK under the same path.
Concretely, when building a binary for Mac Catalyst, Xcode passes the following flags to the linker:
```
-iframework /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX14.2.sdk/System/iOSSupport/System/Library/Frameworks
-L/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX14.2.sdk/System/iOSSupport/usr/lib
```
This is not something that can be disabled (it's enabled as soon as you enable `SUPPORTS_MACCATALYST`), so I think it's pretty safe to say that we don't need an option to turn these off.
I've chosen to slightly deviate from what Xcode does and use `-F` instead of `-iframework`, since we don't need to change the header search path, and this way the flags nicely match on all the linkers. From what I could tell by reading Clang sources, there shouldn't be a difference when just running the linker.
CC `@BlackHoleFox,` `@shepmaster` (I accidentally let rustbot choose the reviewer).
Set the host library path in run-make v2
When the build is configured with `[rust] rpath = false`, we need to set
`LD_LIBRARY_PATH` (or equivalent) to what would have been the `RPATH`,
so the compiler can find its own libraries. The old `tools.mk` code has
this environment prefixed in the `$(BARE_RUSTC)` variable, so we just
need to wire up something similar for run-make v2.
This is now set while building each `rmake.rs` itself, as well as in the
`rust-make-support` helpers for `rustc` and `rustdoc` commands. This is
also available in a `set_host_rpath` function for manual commands, like
in the `compiler-builtins` test.
When the build is configured with `[rust] rpath = false`, we need to set
`LD_LIBRARY_PATH` (or equivalent) to what would have been the `RPATH`,
so the compiler can find its own libraries. The old `tools.mk` code has
this environment prefixed in the `$(BARE_RUSTC)` variable, so we just
need to wire up something similar for run-make v2.
This is now set while building each `rmake.rs` itself, as well as in the
`rust-make-support` helpers for `rustc` and `rustdoc` commands. This is
also available in a `set_host_rpath` function for manual commands, like
in the `compiler-builtins` test.
compiletest: unset `RUSTC_LOG_COLOR`
If this leaks in from the environment then it can make tests fail when they deliberately trigger `WARN` or `ERROR` logging, currently this stops these tests from failing if you set `RUSTC_LOG_COLOR=always` in the parent environment:
- `tests/ui/coherence/occurs-check/associated-type.rs#next`
- `tests/ui/coherence/occurs-check/associated-type.rs#old`
- `tests/ui/higher-ranked/structually-relate-aliases.rs`
- `tests/ui/self/arbitrary-self-from-method-substs.rs#default`
- `tests/ui/traits/next-solver/issue-118950-root-region.rs`
Add MC/DC support to coverage test tools
Extracted and squashed from #123409 by `@ZhuUx.`
These updates to the coverage test tools can land ahead of the main changes, slightly reducing the size and complexity of that PR.
---
The `coverage-dump` changes aren't directly tested in this PR, but the tests in #123409 demonstrate that they do work on real MC/DC coverage output.
`@rustbot` label +A-code-coverage
If this leaks in from the environment then it can make tests fail when
they deliberately trigger `WARN` or `ERROR` logging.
Signed-off-by: David Wood <david@davidtw.co>
There is already a workaround in `compiletest` to deal with custom
`CARGO_HOME` using `-Zignore-directory-in-diagnostics-source-blocks={}`.
A similar need exists when dependencies come from the local `vendor`
directory, which distro builds often use, so now we ignore that too.
Also, `issue-21763.rs` was normalizing `hashbrown-` paths, presumably
expecting a version suffix, but the vendored path doesn't include the
version. Now that matches `[\\/]hashbrown` instead.
Add aarch64-apple-visionos and aarch64-apple-visionos-sim tier 3 targets
Introduces `aarch64-apple-visionos` and `aarch64-apple-visionos-sim` as tier 3 targets. This allows native development for the Apple Vision Pro's visionOS platform.
This work has been tracked in https://github.com/rust-lang/compiler-team/issues/642. There is a corresponding `libc` change https://github.com/rust-lang/libc/pull/3568 that is not required for merge.
Ideally we would be able to incorporate [this change](https://github.com/gimli-rs/object/pull/626) to the `object` crate, but the author has stated that a release will not be cut for quite a while. Therefore, the two locations that would reference the xrOS constant from `object` are hardcoded to their MachO values of 11 and 12, accompanied by TODOs to mark the code as needing change. I am open to suggestions on what to do here to get this checked in.
# Tier 3 Target Policy
At this tier, the Rust project provides no official support for a target, so we place minimal requirements on the introduction of targets.
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
See [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
> * Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> * If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
This naming scheme matches `$ARCH-$VENDOR-$OS-$ABI` which is matches the iOS Apple Silicon simulator (`aarch64-apple-ios-sim`) and other Apple targets.
> Tier 3 targets may have unusual requirements to build or use, but must not
create legal issues or impose onerous legal terms for the Rust project or for
Rust developers or users.
> - The target must not introduce license incompatibilities.
> - Anything added to the Rust repository must be under the standard Rust license (`MIT OR Apache-2.0`).
> - The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the `tidy` tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to besubject to any new license requirements.
> - Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, `rustc` built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> - "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are *not* limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
This contribution is fully available under the standard Rust license with no additional legal restrictions whatsoever. This PR does not introduce any new dependency less permissive than the Rust license policy.
The new targets do not depend on proprietary libraries.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This new target mirrors the standard library for watchOS and iOS, with minor divergences.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation is provided in [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> * This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> * Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> * In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
I acknowledge these requirements and intend to ensure that they are met.
This target does not touch any existing tier 2 or tier 1 targets and should not break any other targets.
CFI: Enable KCFI testing of run-pass tests
This enables KCFI-based testing for all the CFI run-pass tests in the suite today. We can add the test header on top of in-flight CFI tests once they land. This is becoming more important as we get closer to leveraging CFI's multiple type attachment feature, as that is where the implementations will have a divergence.
It also enables KCFI as a sanitizer for x86_64 and aarch64 Linux to make this possible. The sanitizer should likely be available for all aarch64, x86_64, and riscv targets, but that isn't critical for initial testing.
