There is now more structure to the report, so that you can specify e.g. an RFC/PR/issue number and other explanatory details.
Example message:
```
type-parameter-invalid-lint.rs:14:8: 14:9 error: defaults for type parameters are only allowed on type definitions, like `struct` or `enum`
type-parameter-invalid-lint.rs:14 fn avg<T=i32>(_: T) {}
^
type-parameter-invalid-lint.rs:14:8: 14:9 warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
type-parameter-invalid-lint.rs:14:8: 14:9 note: for more information, see PR 30742 <https://github.com/rust-lang/rust/pull/30724>
type-parameter-invalid-lint.rs:11:9: 11:28 note: lint level defined here
type-parameter-invalid-lint.rs:11 #![deny(future_incompatible)]
^~~~~~~~~~~~~~~~~~~
error: aborting due to previous error
```
r? @brson
I would really like feedback also on the specific messages!
Fixes#30746
The compiler can emit errors and warning in JSON format. This is a more easily machine readable form then the usual error output.
Closes#10492, closes#14863.
[breaking-change]
`OptLevel` variants are no longer `pub use`ed by rust::session::config. If you are using these variants, you must change your code to prefix the variant name with `OptLevel`.
[breaking-change]
syntax::errors::Handler::new has been renamed to with_tty_emitter
Many functions which used to take a syntax::errors::ColorConfig, now take a rustc::session::config::ErrorOutputType. If you previously used ColorConfig::Auto as a default, you should now use ErrorOutputType::default().
Previously it was returning a clone, mostly for the two reasons:
* Cloning Lvalue is very cheap most of the time (i.e. when Lvalue is not a Projection);
* There’s users who want &mut lvalue and there’s users who want &lvalue. Returning a value allows
to make either one easier when pattern matching (i.e. Some(ref dest) or Some(ref mut dest)).
However, I’m now convinced this is an invalid approach. Namely the users which want a mutable
reference may modify the Lvalue in-place, but the changes won’t be reflected in the final MIR,
since the Lvalue modified is merely a clone.
Instead, we have two accessors `destination` and `destination_mut` which return a reference to the
destination in desired mode.
r? @nikomatsakis
This is an alternative to https://github.com/rust-lang/rust/pull/29954 for fixing #29857 that seems to me to be more inline with the general strategy around `TyError`. It also includes the fix for #30589 -- in fact, just the minimal change of making `ty_is_local` tolerate `TyError` avoids the ICE, but you get a lot of duplicate error reports, so in the case where the impl's trait reference already includes `TyError`, we just ignore the impl altogether.
cc @arielb1 @sanxiyn
Fixes#29857.
Fixes#30589.
Downgrade unit struct match via S(..) warnings to errors
The error signalling was introduced in #29383
It was noted as a warning-cycle-less regression in #30379Fix#30379
Previously it was returning a value, mostly for the two reasons:
* Cloning Lvalue is very cheap most of the time (i.e. when Lvalue is not a Projection);
* There’s users who want &mut lvalue and there’s users who want &lvalue. Returning a value allows
to make either one easier when pattern matching (i.e. Some(ref dest) or Some(ref mut dest)).
However, I’m now convinced this is an invalid approach. Namely the users which want a mutable
reference may modify the Lvalue in-place, but the changes won’t be reflected in the final MIR,
since the Lvalue modified is merely a clone.
Instead, we have two accessors `destination` and `destination_mut` which return a reference to the
destination in desired mode.
After a call to `visit_def_id()` missing in `mir::visit::Visitor` but not `mir::visit::MutVisitor` has caused me a couple hours of error hunting, I decided I'd take the time to get rid of the code duplication between the two implementations.
cc @rust-lang/compiler
`TypeFoldable`s can currently be visited inefficiently with an identity folder that is run only for its side effects. This creates a more efficient visitor for `TypeFoldable`s and uses it to implement `RegionEscape` and `HasProjectionTypes`, fixing cleanup issue #20298.
This is a pure refactoring.
It was recently realized that we accept defaulted type parameters everywhere, without feature gate, even though the only place that we really *intended* to accept them were on types. This PR adds a lint warning unless the "type-parameter-defaults" feature is enabled. This should eventually become a hard error.
This is a [breaking-change] in that new feature gates are required (or simply removing the defaults, which is probably a better choice as they have little effect at this time). Results of a [crater run][crater] suggest that approximately 5-15 crates are affected. I didn't do the measurement quite right so that run cannot distinguish "true" regressions from "non-root" regressions, but even the upper bound of 15 affected crates seems relatively minimal.
[crater]: https://gist.github.com/nikomatsakis/760c6a67698bd24253bf
cc @rust-lang/lang
r? @pnkfelix
This is roughly the same as my previous PR that created a dependency graph, but that:
1. The dependency graph is only optionally constructed, though this doesn't seem to make much of a difference in terms of overhead (see measurements below).
2. The dependency graph is simpler (I combined a lot of nodes).
3. The dependency graph debugging facilities are much better: you can now use `RUST_DEP_GRAPH_FILTER` to filter the dep graph to just the nodes you are interested in, which is super help.
4. The tests are somewhat more elaborate, including a few known bugs I need to fix in a second pass.
This is potentially a `[breaking-change]` for plugin authors. If you are poking about in tcx state or something like that, you probably want to add `let _ignore = tcx.dep_graph.in_ignore();`, which will cause your reads/writes to be ignored and not affect the dep-graph.
After this, or perhaps as an add-on to this PR in some cases, what I would like to do is the following:
- [x] Write-up a little guide to how to use this system, the debugging options available, and what the possible failure modes are.
- [ ] Introduce read-only and perhaps the `Meta` node
- [x] Replace "memoization tasks" with node from the map itself
- [ ] Fix the shortcomings, obviously! Notably, the HIR map needs to register reads, and there is some state that is not yet tracked. (Maybe as a separate PR.)
- [x] Refactor the dep-graph code so that the actual maintenance of the dep-graph occurs in a parallel thread, and the main thread simply throws things into a shared channel (probably a fixed-size channel). There is no reason for dep-graph construction to be on the main thread. (Maybe as a separate PR.)
Regarding performance: adding this tracking does add some overhead, approximately 2% in my measurements (I was comparing the build times for rustdoc). Interestingly, enabling or disabling tracking doesn't seem to do very much. I want to poke at this some more and gather a bit more data -- in some tests I've seen that 2% go away, but on others it comes back. It's not entirely clear to me if that 2% is truly due to constructing the dep-graph at all.
The next big step after this is write some code to dump the dep-graph to disk and reload it.
r? @michaelwoerister
This merges two separate Call terminators and uses a separate CallKind sub-enum instead.
A little bit unrelatedly, copying into destination value for a certain kind of invoke, is also
implemented here. See the associated comment in code for various details that arise with this
implementation.
DivergingCall is different enough from the regular converging Call to warrant the split. This also
inlines CallData struct and creates a new CallTargets enum in order to have a way to differentiate
between calls that do not have an associated cleanup block.
Note, that this patch still does not produce DivergingCall terminator anywhere. Look for that in
the next patches.
