Refactor memchr to allow optimization
Closes#75659
The implementation already uses naive search if the slice if short enough, but the case is complicated enough to not be optimized away. This PR refactors memchr so that it exists early when the slice is short enough.
Codegen-wise, as shown in #75659, memchr was not inlined previously so the only way I could find to test this is to check if there is no memchr call. Let me know if there is a more robust solution here.
Overhaul const-checking diagnostics
The primary purpose of this PR was to remove `NonConstOp::STOPS_CONST_CHECKING`, which causes any additional errors found by the const-checker to be silenced. I used this flag to preserve diagnostic parity with `qualify_min_const_fn.rs`, which has since been removed.
However, simply removing the flag caused a deluge of errors in some cases, since an error would be emitted any time a local or temporary had a wrong type. To remedy this, I added an alternative system (`DiagnosticImportance`) to silence additional error messages that were likely to distract the user from the underlying issue. When an error of the highest importance occurs, all less important errors are silenced. When no error of the highest importance occurs, all less important errors are emitted after checking is complete. Following the suggestions from the important error is usually enough to fix the less important errors, so this should lead to better UX most of the time.
There's also some unrelated diagnostics improvements in this PR isolated in their own commits. Splitting them out would be possible, but a bit of a pain. This isn't as tidy as some of my other PRs, but it should *only* affect diagnostics, never whether or not something passes const-checking. Note that there are a few trivial exceptions to this, like banning `Yield` in all const-contexts, not just `const fn`.
As always, meant to be reviewed commit-by-commit.
r? `@oli-obk`
const evaluatable: improve `TooGeneric` handling
Instead of emitting an error in `fulfill`, we now correctly stall on inference variables.
As `const_eval_resolve` returns `ErrorHandled::TooGeneric` when encountering generic parameters on which
we actually do want to error, we check for inference variables and eagerly emit an error if they don't exist, returning `ErrorHandled::Reported` instead.
Also contains a small bugfix for `ConstEquate` where we previously only stalled on type variables. This is probably a leftover from
when we did not yet support stalling on const inference variables.
r? @oli-obk cc @varkor @eddyb
Fix recursive nonterminal expansion during pretty-print/reparse check
Makes progress towards #43081
In PR #73084, we started recursively expanded nonterminals during the
pretty-print/reparse check, allowing them to be properly compared
against the reparsed tokenstream.
Unfortunately, the recursive logic in that PR only handles the case
where a nonterminal appears inside a `TokenTree::Delimited`. If a
nonterminal appears directly in the expanded tokens of another
nonterminal, the inner nonterminal will not be expanded.
This PR fixes the recursive expansion of nonterminals, ensuring that
they are expanded wherever they occur.
Rollup of 12 pull requests
Successful merges:
- #77037 (more tiny clippy cleanups)
- #77233 (BTreeMap: keep an eye out on the size of the main components)
- #77280 (Ensure that all LLVM components requested by tests are available on CI)
- #77284 (library: Forward compiler-builtins "mem" feature)
- #77296 (liveness: Use Option::None to represent absent live nodes)
- #77322 (Add unstable book docs for `-Zunsound-mir-opts`)
- #77328 (Use `rtassert!` instead of `assert!` from the child process after fork() in std::sys::unix::process::Command::spawn())
- #77331 (Add test for async/await combined with const-generics.)
- #77338 (Fix typo in alloc vec comment)
- #77340 (Alloc vec use imported path)
- #77345 (Add test for issue #74761)
- #77348 (Update books)
Failed merges:
r? `@ghost`
Add support for cmse_nonsecure_entry attribute
This pull request adds the `cmse_nonsecure_entry` attribute under an unstable feature.
I was not sure if it was fine for me to send directly the pull-request or if I should submit a RFC first. I was told on Zulip that it was fine to do so but please close it if I need first submit a RFC or follow another process instead.
The `cmse_nonsecure_entry` attribute is a LLVM attribute that will be available in LLVM 11. I plan to rebase on the [upgrade PR](https://github.com/rust-lang/rust/pull/73526) once merged to make this one compile.
This attribute modifies code generation of the function as explained [here](https://developer.arm.com/documentation/ecm0359818/latest/) to make it work with the TrustZone-M hardware feature. This feature is only available on `thumbv8m` targets so I created an error for that if one tries to use this attribute for another target.
I added this attribute in Rust as any other LLVM attribute are added but since this one is target-dependent I am not sure if it was the best thing to do. Please indicate me if you think of other ways, like isolating target-dependent attributes together.
----------------
Tracking issue: https://github.com/rust-lang/rust/issues/75835
This patch adds support for the LLVM cmse_nonsecure_entry attribute.
This is a target-dependent attribute that only has sense for the
thumbv8m Rust targets.
You can find more information about this attribute here:
https://developer.arm.com/documentation/ecm0359818/latest/
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Liveness refactoring continued
* Move body_owner field from IrMaps to Liveness (the only user of the field).
* Use upvars instead of FnKind to check for closures (avoids FnKind, will be useful when checking all bodies, not just fns).
* Use visit_param to add variables corresponding to params.
* Store upvars_mentioned inside Liveness struct.
* Inline visitor implementation for IrMaps, avoiding unnecessary indirection.
* Test interaction with automatically_derived attribute (not covered by any of existing tests).
No functional changes intended.
Resolve `crate` in intra-doc links properly across crates
Closes https://github.com/rust-lang/rust/issues/77193; see https://github.com/rust-lang/rust/issues/77193#issuecomment-699065946 for an explanation of what's going on here.
~~This also fixes the BTreeMap docs that have been broken for a while; see the description on the second commit for why and how.~~ Nope, see the second commit for why the link had to be changed.
r? `@Manishearth`
cc `@dylni`
`@dylni` note that this doesn't solve your original problem - now _both_ `with_code` and `crate::with_code` will be broken links. However this will fix a lot of other broken links (in particular I think https://docs.rs/sqlx/0.4.0-beta.1/sqlx/query/struct.Query.html is because of this bug). I'll open another issue for resolving additional docs in the new scope.
Makes progress towards #43081
In PR #73084, we started recursively expanded nonterminals during the
pretty-print/reparse check, allowing them to be properly compared
against the reparsed tokenstream.
Unfortunately, the recursive logic in that PR only handles the case
where a nonterminal appears inside a `TokenTree::Delimited`. If a
nonterminal appears directly in the expanded tokens of another
nonterminal, the inner nonterminal will not be expanded.
This PR fixes the recursive expansion of nonterminals, ensuring that
they are expanded wherever they occur.
Rollup of 7 pull requests
Successful merges:
- #76454 (UI to unit test for those using Cell/RefCell/UnsafeCell)
- #76474 (Add option to pass a custom codegen backend from a driver)
- #76711 (diag: improve closure/generic parameter mismatch)
- #77170 (Remove `#[rustc_allow_const_fn_ptr]` and add `#![feature(const_fn_fn_ptr_basics)]`)
- #77194 (Add doc alias for iterator fold)
- #77288 (fix building libstd for Miri on macOS)
- #77295 (Update unstable-book: Fix ABNF in inline assembly docs)
Failed merges:
r? `@ghost`
Remove `#[rustc_allow_const_fn_ptr]` and add `#![feature(const_fn_fn_ptr_basics)]`
`rustc_allow_const_fn_ptr` was a hack to work around the lack of an escape hatch for the "min `const fn`" checks in const-stable functions. Now that we have co-opted `allow_internal_unstable` for this purpose, we no longer need a bespoke attribute.
Now this functionality is gated under `const_fn_fn_ptr_basics` (how concise!), and `#[allow_internal_unstable(const_fn_fn_ptr_basics)]` replaces `#[rustc_allow_const_fn_ptr]`. `const_fn_fn_ptr_basics` allows function pointer types to appear in the arguments and locals of a `const fn` as well as function pointer casts to be performed inside a `const fn`. Both of these were allowed in constants and statics already. Notably, this does **not** allow users to invoke function pointers in a const context. Presumably, we will use a nicer name for that (`const_fn_ptr`?).
r? @oli-obk
diag: improve closure/generic parameter mismatch
Fixes#51154.
This PR improves the diagnostic when a type parameter is expected and a closure is found, noting that each closure has a distinct type and therefore could not always match the caller-chosen type of the parameter.
r? @estebank
Add option to pass a custom codegen backend from a driver
This allows the driver to pass information to the codegen backend. For example the headcrab debugger may in the future want to use cg_clif to JIT code to be injected in the debuggee. This would PR make it possible to tell cg_clif which symbol can be found at which address and to tell it to inject the JITed code into the right process.
This PR may also help with https://github.com/rust-lang/miri/pull/1540 by allowing miri to provide a codegen backend that only emits metadata and doesn't perform any codegen.
cc @nbaksalyar (headcrab)
cc @RalfJung (miri)
