When we do a "HR subtype" check, we replace all late-bound regions (LBR)
in the subtype with fresh variables, and skolemize the late-bound
regions in the supertype. If those skolemized regions from the supertype
wind up being super-regions (directly or indirectly) of either
- another skolemized region; or,
- some region that pre-exists the HR subtype check
- e.g., a region variable that is not one of those created
to represent bound regions in the subtype
then the subtype check fails.
What will change when we fix#32330 is that some of the LBR in the
subtype may become early-bound. In that case, they would no longer be in
the "permitted set" of variables that can be related to a skolemized
type.
So the foundation for this warning is to collect variables that we found
to be related to a skolemized type. For each of them, we have a
`BoundRegion` which carries a `Issue32330` flag. We check whether any of
those flags indicate that this variable was created from a lifetime
that will change from late- to early-bound. If so, we issue a warning
indicating that the results of compilation may change.
This is imperfect, since there are other kinds of code that will not
compile once #32330 is fixed. However, it fixes the errors observed in
practice on crater runs.
Currently, we consider region subtyping a failure
if a skolemized lifetime is relatable to any
other lifetime in any way at all. But a more precise
formulation is to say that a skolemized lifetime:
- must not have any *incoming* edges in the region graph
- only has *outgoing* edges to nodes that are `'static`
To enforce the latter requirement, we add edges from `'static -> 'x` for
each lifetime '`x' reachable from a skolemized region.
We now have to add a new `pop_skolemized` routine to do cleanup.
Whereas before if there were *any* edges relating to a skolemized
region, we would return `Err` and hence rollback the transaction, we now
tolerate some edges and return `Ok`. Therefore, the `pop_skolemized`
routine runs and cleans up those edges.
refactor autoderef to avoid prematurely registering obligations
Refactor `FnCtxt::autoderef` to use an external iterator and to not
register any obligation from the main autoderef loop, but rather to
register them after (and if) the loop successfully completes.
Fixes#24819Fixes#25801Fixes#27631Fixes#31258Fixes#31964Fixes#32320Fixes#33515Fixes#33755
r? @eddyb
Increase spacing in error format for readability.
Two small tweaks that seem to help readability quite a bit:
* Add spacing header<->snippet, but use the |> on the side for visual consistency
* Fix#33819
* Fix#33763
* Move format-sensitive test (issue-26480 in cfail) to ui test
r? @nikomatsakis
Perform `cfg` attribute processing during macro expansion and fix bugs
This PR refactors `cfg` attribute processing and fixes bugs. More specifically:
- It merges gated feature checking for stmt/expr attributes, `cfg_attr` processing, and `cfg` processing into a single fold.
- This allows feature gated `cfg` variables to be used in `cfg_attr` on unconfigured items. All other feature gated attributes can already be used on unconfigured items.
- It performs `cfg` attribute processing during macro expansion instead of after expansion so that macro-expanded items are configured the same as ordinary items. In particular, to match their non-expanded counterparts,
- macro-expanded unconfigured macro invocations are no longer expanded,
- macro-expanded unconfigured macro definitions are no longer usable, and
- feature gated `cfg` variables on macro-expanded macro definitions/invocations are now errors.
This is a [breaking-change]. For example, the following would break:
```rust
macro_rules! m {
() => {
#[cfg(attr)]
macro_rules! foo { () => {} }
foo!(); // This will be an error
macro_rules! bar { () => { fn f() {} } }
#[cfg(attr)] bar!(); // This will no longer be expanded ...
fn g() { f(); } // ... so that `f` will be unresolved.
#[cfg(target_thread_local)] // This will be a gated feature error
macro_rules! baz { () => {} }
}
}
m!();
```
r? @nrc
Fix `asm-misplaced-option` on ARM/AArch64
This fixesrust-lang/rust#33737. Of course, since we don't run `make check` for ARM cross builds, you probably won't notice it.
Fixes to mir dataflow
Fixes to mir dataflow
This collects a bunch of changes to `rustc_borrowck::borrowck::dataflow` (which others have pointed out should probably migrate to some crate that isn't tied to the borrow-checker -- but I have not attempted that here, especially since there are competing approaches to dataflow that we should also evaluate).
These changes:
1. Provide a family of related analyses: MovingOutStatements (which is what the old AST-based dataflo computed), as well as MaybeInitialized, MaybeUninitalized, and DefinitelyInitialized.
* (The last two are actually inverses of each other; we should pick one and drop the other.)
2. Fix bugs in the pre-existing analysis implementation, which was untested and thus some obvious bugs went unnoticed, which brings us to the third point:
3. Add a unit test infrastructure for the MIR dataflow analysis.
* The tests work by adding a new intrinsic that is able to query the analysis state for a particular expression (technically, a particular L-value).
* See the examples in compile-fail/mir-dataflow/inits-1.rs and compile-fail/mir-dataflow/uninits-1.rs
* These tests are only checking the results for MaybeInitialized, MaybeUninitalized, and DefinitelyInitialized; I am not sure if it will be feasible to generalize this testing strategy to the MovingOutStatements dataflow operator.
Make sure that macros that didn't pass LHS checking are not expanded.
This avoid duplicate errors for things like invalid fragment specifiers, or
parsing errors for ambiguous macros.
Save metadata even with -Z no-trans (e.g. for multi-crate cargo check).
Removes the item symbol map in metadata, as we can now generate them in a deterministic manner.
The `-Z no-trans` change lets the LLVM passes and linking run, but with just metadata and no code.
It fails while trying to link a binary because there's no `main` function, which is correct but not good UX.
There's also no way to easily throw away all of the artifacts to rebuild with actual code generation.
We might want `cargo check` to do that using cargo-internal information and then it would just work.
cc @alexcrichton @nikomatsakis @Aatch @michaelwoerister
Refactor `FnCtxt::autoderef` to use an external iterator and to not
register any obligation from the main autoderef loop, but rather to
register them after (and if) the loop successfully completes.
Fixes#24819Fixes#25801Fixes#27631Fixes#31258Fixes#31964Fixes#32320Fixes#33515Fixes#33755
Allow `concat_idents!` in type positions as well as in expression positions
This allows the `concat_idents!` macro in type positions as well as in expression positions.
r? @nrc
rustc: Add a new crate type, cdylib
This commit is an implementation of [RFC 1510] which adds a new crate type,
`cdylib`, to the compiler. This new crate type differs from the existing `dylib`
crate type in a few key ways:
* No metadata is present in the final artifact
* Symbol visibility rules are the same as executables, that is only reachable
`extern` functions are visible symbols
* LTO is allowed
* All libraries are always linked statically
This commit is relatively simple by just plubming the compiler with another
crate type which takes different branches here and there. The only major change
is an implementation of the `Linker::export_symbols` function on Unix which now
actually does something. This helps restrict the public symbols from a cdylib on
Unix.
With this PR a "hello world" `cdylib` is 7.2K while the same `dylib` is 2.4MB,
which is some nice size savings!
[RFC 1510]: https://github.com/rust-lang/rfcs/pull/1510Closes#33132
This commit is an implementation of [RFC 1510] which adds a new crate type,
`cdylib`, to the compiler. This new crate type differs from the existing `dylib`
crate type in a few key ways:
* No metadata is present in the final artifact
* Symbol visibility rules are the same as executables, that is only reachable
`extern` functions are visible symbols
* LTO is allowed
* All libraries are always linked statically
This commit is relatively simple by just plubming the compiler with another
crate type which takes different branches here and there. The only major change
is an implementation of the `Linker::export_symbols` function on Unix which now
actually does something. This helps restrict the public symbols from a cdylib on
Unix.
With this PR a "hello world" `cdylib` is 7.2K while the same `dylib` is 2.4MB,
which is some nice size savings!
[RFC 1510]: https://github.com/rust-lang/rfcs/pull/1510Closes#33132
Only print parameters with elided lifetimes in elision error messages.
When displaying the function parameters for a lifetime elision error message,
this changes it to first filter out the parameters that don't have elided
lifetimes.
Fixes#30255.
Add regression tests for error message when using enum variant as a type
I'm guessing these were actually fixed with PR #27085.
Closes#21225Closes#19197
