Test fixes for Arm64EC Windows
* `tests/ui/cfg/conditional-compile-arch.rs` needs an Arm64EC case.
* `tests/ui/runtime/backtrace-debuginfo.rs` should skip Arm64EC as it suffers from the same truncated backtraces as Arm64 Windows.
* `tests/ui/linkage-attr/incompatible-flavor.rs` is a general issue: it assumes that the Rust compiler is always built with the x86 target enabled in the backend, but I only enabled AArch64 when building locally to speed up the LLVM compilation.
tests: Don't check for self-printed output in std-backtrace.rs test
The `Display` implementation for `Backtrace` used to print
stack backtrace:
but that print was since removed. See https://github.com/rust-lang/backtrace-rs/pull/286 and https://github.com/rust-lang/rust/pull/69042. To make the existing test pass, the print was added to the test instead. But it doesn't make sense to check for something that the test itself does since that will not detect any regressions in the implementation of `Backtrace`.
What the test _should_ check is that "stack backtrace:" is _not_ printed in `Display` of `Backtrace`. So do that instead.
This is one small steps towards resolving https://github.com/rust-lang/rust/issues/71706. The next steps after this step involves extending and hardening that test further.
MIR-build: No longer emit assumes in enum-as casting
This just uses the `valid_range` from the backend, so it's duplicating the range metadata that now we include on parameters and loads, and thus no longer seems to be useful -- notably there's no codegen test failures from removing it.
(Because it's using data from the same source as the backend annotations, it doesn't do anything to mitigate things like rust-lang/rust#144388 where the range in the layout is more permissive than the actual possible discriminants. A variant of this that actually checked the discriminants more specifically might be useful, so could potentially be added in future, but I don't think the *current* checks are actually providing value.)
r? mir
Randomly turns out that this
Fixes https://github.com/rust-lang/rust/issues/121097
Stop using the old `validate_attr` logic for stability attributes
I think this was accidentally missed when implementing the stability attributes?
r? `````@oli-obk`````
cc `````@jdonszelmann`````
Add more test case to check if the false note related to sealed trait suppressed
Closesrust-lang/rust#143121
I started to fix the issue but I found that this one has already been addressed in this PR (https://github.com/rust-lang/rust/pull/143431). I added an additional test to prove the reported thing has been resolved just in case.
I think we can discard this pull request if there's no need to add such kind of tests👍🏻
generate elf symbol version in raw-dylib
For link names like `aaa@bbb`, it generates a symbol named `aaa` and a version named `bbb`.
For link names like `aaa\0bbb`, `aaa@`@bbb`` or `aa@bb@cc`, it emits errors.
It adds a test that the executable is linked with glibc using raw-dylib.
cc rust-lang/rust#135694
Use serde for target spec json deserialize
The previous manual parsing of `serde_json::Value` was a lot of complicated code and extremely error-prone. It was full of janky behavior like sometimes ignoring type errors, sometimes erroring for type errors, sometimes warning for type errors, and sometimes just ICEing for type errors (the icing on the top).
Additionally, many of the error messages about allowed values were out of date because they were in a completely different place than the FromStr impls. Overall, the system caused confusion for users.
I also found the old deserialization code annoying to read. Whenever a `key!` invocation was found, one had to first look for the right macro arm, and no go to definition could help.
This PR replaces all this manual parsing with a 2-step process involving serde.
First, the string is parsed into a `TargetSpecJson` struct. This struct is a 1:1 representation of the spec JSON. It already parses all the enums and is very simple to read and write.
Then, the fields from this struct are copied into the actual `Target`. The reason for this two-step process instead of just serializing into a `Target` is because of a few reasons
1. There are a few transformations performed between the two formats
2. The default logic is implemented this way. Otherwise all the default field values would have to be spelled out again, which is suboptimal. With this logic, they fall out naturally, because everything in the json struct is an `Option`.
Overall, the mapping is pretty simple, with the vast majority of fields just doing a 1:1 mapping that is captured by two macros. I have deliberately avoided making the macros generic to keep them simple.
All the `FromStr` impls now have the error message right inside them, which increases the chance of it being up to date. Some "`from_str`" impls were turned into proper `FromStr` impls to support this.
The new code is much less involved, delegating all the JSON parsing logic to serde, without any manual type matching.
This change introduces a few breaking changes for consumers. While it is possible to use this format on stable, it is very much subject to change, so breaking changes are expected. The hope is also that because of the way stricter behavior, breaking changes are easier to deal with, as they come with clearer error messages.
1. Invalid types now always error, everywhere. Previously, they would sometimes error, and sometimes just be ignored (which meant the users JSON was still broken, just silently!)
2. This now makes use of `deny_unknown_fields` instead of just warning on unused fields, which was done previously. Serde doesn't make it easy to get such warning behavior, which was the primary reason that this now changed. But I think error behavior is very reasonable too. If someone has random stale fields in their JSON, it is likely because these fields did something at some point but no longer do, and the user likely wants to be informed of this so they can figure out what to do.
This is also relevant for the future. If we remove a field but someone has it set, it probably makes sense for them to take a look whether they need this and should look for alternatives, or whether they can just delete it. Overall, the JSON is made more explicit.
This is the only expected breakage, but there could also be small breakage from small mistakes. All targets roundtrip though, so it can't be anything too major.
fixesrust-lang/rust#144153
Ensure we codegen the main fn
This fixes two bugs. The one that was identified in the linked issue is that when we have a `main` function, mono collection didn't consider it as an extra collection root.
The other is that since CGU partitioning doesn't know about the call edges between the entrypoint functions, naively it can put them in different CGUs and mark them all as internal. Which would result in LLVM just deleting all of them. There was an existing hack to exclude `lang = "start"` from internalization, which I've extended to include `main`.
Fixes https://github.com/rust-lang/rust/issues/144052
don't link to the nightly version of the Edition Guide in stable lints
As reported in rust-lang/rust#143557 for `rust_2024_incompatible_pat`, most future-Edition-incompatibility lints link to the nightly version of the Edition Guide; the lints were written before their respective Editions (and their guides) stabilized. But now that Rusts 2021 and 2024 are stable, these lints are emitted on stable versions of the compiler, where it makes more sense to present users with links that don't say "nightly" in them.
This does not change the link for `rust_2024_incompatible_pat`. That's handled in rust-lang/rust#144006.
Rename `tests/{assembly,codegen}` into `tests/{assembly,codegen}-llvm` and ignore these testsuites if configured backend doesn't match
Follow-up of https://github.com/rust-lang/rust/pull/144125.
This PR changes `compiletest` so that `asm` tests are only run if they match the current codegen backend. To better reflect it, I renamed the `tests/ui/asm` folder into `tests/ui/asm-llvm`. Like that, we can add new asm tests for other backends if we want without needing to add extra code to `compiletest`.
Next step will be to use the new code annotations added in rust-lang/rust#144125 to ignore ui tests failing in cg_gcc until it's fixed on our side.
cc `@antoyo` `@oli-obk`
r? `@Kobzol`
tests: cover more `exported_private_dependencies` cases
This PR adds tests for all missing cases from rust-lang/rust#71043 and some on top of that. I believe with this, that issue can be closed.
Some of the lints can be improved, e.g. `provided_impl_trait` and `impl From<PublicWithStdImpl> for OtherType` lint twice.
cc ```@epage``` in case you want to double check I didn't miss anything.
The previous manual parsing of `serde_json::Value` was a lot of
complicated code and extremely error-prone. It was full of janky
behavior like sometimes ignoring type errors, sometimes erroring for
type errors, sometimes warning for type errors, and sometimes just
ICEing for type errors (the icing on the top).
Additionally, many of the error messages about allowed values were out
of date because they were in a completely different place than the
FromStr impls. Overall, the system caused confusion for users.
I also found the old deserialization code annoying to read. Whenever a
`key!` invocation was found, one had to first look for the right macro
arm, and no go to definition could help.
This PR replaces all this manual parsing with a 2-step process involving
serde.
First, the string is parsed into a `TargetSpecJson` struct. This struct
is a 1:1 representation of the spec JSON. It already parses all the
enums and is very simple to read and write.
Then, the fields from this struct are copied into the actual `Target`.
The reason for this two-step process instead of just serializing into a
`Target` is because of a few reasons
1. There are a few transformations performed between the two formats
2. The default logic is implemented this way. Otherwise all the default
field values would have to be spelled out again, which is
suboptimal. With this logic, they fall out naturally, because
everything in the json struct is an `Option`.
Overall, the mapping is pretty simple, with the vast majority of fields
just doing a 1:1 mapping that is captured by two macros. I have
deliberately avoided making the macros generic to keep them simple.
All the `FromStr` impls now have the error message right inside them,
which increases the chance of it being up to date. Some "`from_str`"
impls were turned into proper `FromStr` impls to support this.
The new code is much less involved, delegating all the JSON parsing
logic to serde, without any manual type matching.
This change introduces a few breaking changes for consumers. While it is
possible to use this format on stable, it is very much subject to
change, so breaking changes are expected. The hope is also that because
of the way stricter behavior, breaking changes are easier to deal with,
as they come with clearer error messages.
1. Invalid types now always error, everywhere. Previously, they would
sometimes error, and sometimes just be ignored (which meant the users
JSON was still broken, just silently!)
2. This now makes use of `deny_unknown_fields` instead of just warning
on unused fields, which was done previously. Serde doesn't make it
easy to get such warning behavior, which was the primary reason that
this now changed. But I think error behavior is very reasonable too.
If someone has random stale fields in their JSON, it is likely
because these fields did something at some point but no longer do,
and the user likely wants to be informed of this so they can figure
out what to do.
This is also relevant for the future. If we remove a field but
someone has it set, it probably makes sense for them to take a look
whether they need this and should look for alternatives, or whether
they can just delete it. Overall, the JSON is made more explicit.
This is the only expected breakage, but there could also be small
breakage from small mistakes. All targets roundtrip though, so it can't
be anything too major.
Don't use another main test file as auxiliary
In this case, the exact extern crate isn't very important, it just needs to not be another main test file.
This is part of the changes needed to address the spurious failures from a main test `../removing-extern-crate.rs` being both an auxiliary and a main test file, causing fs races due to multiple `rustc` processes in multiple test threads trying to build the main test file both as a main test and also as an auxiliary at around the same time.
Part 1 of rust-lang/rust#144237.
r? ``@RalfJung`` (or compiler)
Mitigate `#[align]` name resolution ambiguity regression with a rename
Mitigates beta regression rust-lang/rust#143834 after a beta backport.
### Background on the beta regression
The name resolution regression arises due to rust-lang/rust#142507 adding a new feature-gated built-in attribute named `#[align]`. However, unfortunately even [introducing new feature-gated unstable built-in attributes can break user code](https://www.github.com/rust-lang/rust/issues/134963) such as
```rs
macro_rules! align {
() => {
/* .. */
};
}
pub(crate) use align; // `use` here becomes ambiguous
```
### Mitigation approach
This PR renames `#[align]` to `#[rustc_align]` to mitigate the beta regression by:
1. Undoing the introduction of a new built-in attribute with a common name, i.e. `#[align]`.
2. Renaming `#[align]` to `#[rustc_align]`. The renamed attribute being `rustc_align` will not introduce new stable breakages, as attributes beginning with `rustc` are reserved and perma-unstable. This does mean existing nightly code using `fn_align` feature will additionally need to specify `#![feature(rustc_attrs)]`.
This PR is very much a short-term mitigation to alleviate time pressure from having to fully fix the current limitation of inevitable name resolution regressions that would arise from adding any built-in attributes. Long-term solutions are discussed in [#t-lang > namespacing macro attrs to reduce conflicts with new adds](https://rust-lang.zulipchat.com/#narrow/channel/213817-t-lang/topic/namespacing.20macro.20attrs.20to.20reduce.20conflicts.20with.20new.20adds/with/529249622).
### Alternative mitigation options
[Various mitigation options were considered during the compiler triage meeting](https://github.com/rust-lang/rust/issues/143834#issuecomment-3084415277), and those consideration are partly reproduced here:
- Reverting the PR doesn't seem very minimal/trivial, and carries risks of its own.
- Rename to a less-common but aim-to-stabilization name is itself not safe nor convenient, because (1) that risks introducing new regressions (i.e. ambiguity against the new name), and (2) lang would have to FCP the new name hastily for the mitigation to land timely and have a chance to be backported. This also makes the path towards stabilization annoying.
- Rename the attribute to a rustc attribute, which will be perma-unstable and does not cause new ambiguities in stable code.
- This alleviates the time pressure to address *this* regression, or for lang to have to rush an FCP for some new name that can still break user code.
- This avoids backing out a whole implementation.
### Review advice
This PR is best reviewed commit-by-commit.
- Commit 1 adds a test `tests/ui/attributes/fn-align-nameres-ambiguity-143834.rs` which demonstrates the current name resolution regression re. `align`. This test fails against current master.
- Commit 2 carries out the renames and test reblesses. Notably, commit 2 will cause `tests/ui/attributes/fn-align-nameres-ambiguity-143834.rs` to change from fail (nameres regression) to pass.
This PR, if the approach still seems acceptable, will need a beta-backport to address the beta regression.
rustc_public: de-StableMIR-ize
This PR updates relevant docs about StableMIR, basically just rewording StableMIR/SMIR to rustc_public/rustc_public's IR.
The README.md in the `rustc_public` crate is out-dated. I plan to rewrite it after we fork rustc_public into its own repository.
This PR doesn't change the fact that we still use `-Z unpretty=stable-mir` as a rustc parameter for printing the IR, since I feel it's a bit verbose and weird if we use `-Z unpretty=rustc-public-ir`. I was wondering if we can have a short and easy alias for rustc_public's IR.
In this case, the exact extern crate isn't very important.
This is part of the changes needed to address the spurious failures from
a main test `../removing-extern-crate.rs` being both an auxiliary and a
main test file, causing fs races due to multiple `rustc` processes in
multiple test threads trying to build the main test file both as a main
test and also as an auxiliary at around the same time.
tests: Skip supported-crate-types test on musl hosts
This test depends on the target-specific default of crt-static for musl targets. However, running the testsuite on a musl host requires setting `crt-static` to `false`, as it wouldn't otherwise be possible to build rustc. This in turn will enable `-Ctarget-feature=-crt-static` for all tests, mismatching the expected `+crt-static` for the musl target tested in this testcase.
Since this test specifically tests the default value of `crt-static` for the musl target, ignoring it entirely makes more sense than manually setting `-Ctarget-feature=+crt-static` here, but both would be valid approaches.
Ban projecting into SIMD types [MCP838]
Closes https://github.com/rust-lang/compiler-team/issues/838
The actual compiler change here is tiny; there's just a bazillion tests to update.
~~Since I'm sure I've missed some, for now~~
~~r ghost~~
try-job: test-various
try-job: x86_64-gnu-nopt
