Implement TryFrom<&[T]> for &[T; N]
There are many cases where a buffer with a static compile-time size is preferred over a slice with a dynamic size. This allows for performing a checked conversion from `&[T]` to `&[T; N]`. This may also lead to compile-time optimizations involving `[T; N]` such as loop unrolling.
This is my first PR to Rust, so I'm not sure if discussion of this change should happen here or does it need its own RFC? I figured these changes would be a subset of #33417.
Ensure std::mem::Discriminant is Send + Sync
`PhantomData<*const T>` has the implication of Send / Syncness following
the *const T type, but the discriminant should always be Send and Sync.
Use `PhantomData<fn() -> T>` which has the same variance in T, but is Send + Sync
`PhantomData<*const T>` has the implication of Send / Syncness following
the *const T type, but the discriminant should always be Send and Sync.
Use `PhantomData<fn() -> T>` which has the same variance in T, but is Send + Sync
update FIXME(#6298) to point to open issue 15020
update FIXME(#6268) to point to RFC 811
update FIXME(#10520) to point to RFC 1751
remove FIXME for emscripten issue 4563 and include target in `test_estimate_scaling_factor`
remove FIXME(#18207) since node_id isn't used for `ref` pattern analysis
remove FIXME(#6308) since DST was implemented in #12938
remove FIXME(#2658) since it was decided to not reorganize module
remove FIXME(#20590) since it was decided to stay conservative with projection types
remove FIXME(#20297) since it was decided that solving the issue is unnecessary
remove FIXME(#27086) since closures do correspond to structs now
remove FIXME(#13846) and enable `function_sections` for windows
remove mention of #22079 in FIXME(#22079) since this is a general FIXME
remove FIXME(#5074) since the restriction on borrow were lifted
remove FIXME(#13101) since `assert_receiver_is_total_eq` stays.
remove FIXME(#19649) now that stability markers render.
remove FIXME(#13642) now the benchmarks were moved.
remove FIXME(#6220) now that floating points can be formatted.
remove FIXME(#18248) and write tests for `Rc<str>` and `Rc<[u8]>`
remove reference to irelevent issues in FIXME(#1697, #2178...)
update FIXME(#5516) to point to getopts issue 7
update FIXME(#7771) to point to RFC 628
update FIXME(#19839) to point to issue 26925
Add blanket TryFrom impl when From is implemented.
Adds `impl<T, U> TryFrom<T> for U where U: From<T>`.
Removes `impl<'a, T> TryFrom<&'a str> for T where T: FromStr` (originally added in #40281) due to overlapping impls caused by the new blanket impl. This removal is to be discussed further on the tracking issue for TryFrom.
Refs #33417.
/cc @sfackler, @scottmcm (thank you for the help!), and @aturon
Add more custom folding to `core::iter` adaptors
Many of the iterator adaptors will perform faster folds if they forward
to their inner iterator's folds, especially for inner types like `Chain`
which are optimized too. The following types are newly specialized:
| Type | `fold` | `rfold` |
| ----------- | ------ | ------- |
| `Enumerate` | ✓ | ✓ |
| `Filter` | ✓ | ✓ |
| `FilterMap` | ✓ | ✓ |
| `FlatMap` | exists | ✓ |
| `Fuse` | ✓ | ✓ |
| `Inspect` | ✓ | ✓ |
| `Peekable` | ✓ | N/A¹ |
| `Skip` | ✓ | N/A² |
| `SkipWhile` | ✓ | N/A¹ |
¹ not a `DoubleEndedIterator`
² `Skip::next_back` doesn't pull skipped items at all, but this couldn't
be avoided if `Skip::rfold` were to call its inner iterator's `rfold`.
Benchmarks
----------
In the following results, plain `_sum` computes the sum of a million
integers -- note that `sum()` is implemented with `fold()`. The
`_ref_sum` variants do the same on a `by_ref()` iterator, which is
limited to calling `next()` one by one, without specialized `fold`.
The `chain` variants perform the same tests on two iterators chained
together, to show a greater benefit of forwarding `fold` internally.
test iter::bench_enumerate_chain_ref_sum ... bench: 2,216,264 ns/iter (+/- 29,228)
test iter::bench_enumerate_chain_sum ... bench: 922,380 ns/iter (+/- 2,676)
test iter::bench_enumerate_ref_sum ... bench: 476,094 ns/iter (+/- 7,110)
test iter::bench_enumerate_sum ... bench: 476,438 ns/iter (+/- 3,334)
test iter::bench_filter_chain_ref_sum ... bench: 2,266,095 ns/iter (+/- 6,051)
test iter::bench_filter_chain_sum ... bench: 745,594 ns/iter (+/- 2,013)
test iter::bench_filter_ref_sum ... bench: 889,696 ns/iter (+/- 1,188)
test iter::bench_filter_sum ... bench: 667,325 ns/iter (+/- 1,894)
test iter::bench_filter_map_chain_ref_sum ... bench: 2,259,195 ns/iter (+/- 353,440)
test iter::bench_filter_map_chain_sum ... bench: 1,223,280 ns/iter (+/- 1,972)
test iter::bench_filter_map_ref_sum ... bench: 611,607 ns/iter (+/- 2,507)
test iter::bench_filter_map_sum ... bench: 611,610 ns/iter (+/- 472)
test iter::bench_fuse_chain_ref_sum ... bench: 2,246,106 ns/iter (+/- 22,395)
test iter::bench_fuse_chain_sum ... bench: 634,887 ns/iter (+/- 1,341)
test iter::bench_fuse_ref_sum ... bench: 444,816 ns/iter (+/- 1,748)
test iter::bench_fuse_sum ... bench: 316,954 ns/iter (+/- 2,616)
test iter::bench_inspect_chain_ref_sum ... bench: 2,245,431 ns/iter (+/- 21,371)
test iter::bench_inspect_chain_sum ... bench: 631,645 ns/iter (+/- 4,928)
test iter::bench_inspect_ref_sum ... bench: 317,437 ns/iter (+/- 702)
test iter::bench_inspect_sum ... bench: 315,942 ns/iter (+/- 4,320)
test iter::bench_peekable_chain_ref_sum ... bench: 2,243,585 ns/iter (+/- 12,186)
test iter::bench_peekable_chain_sum ... bench: 634,848 ns/iter (+/- 1,712)
test iter::bench_peekable_ref_sum ... bench: 444,808 ns/iter (+/- 480)
test iter::bench_peekable_sum ... bench: 317,133 ns/iter (+/- 3,309)
test iter::bench_skip_chain_ref_sum ... bench: 1,778,734 ns/iter (+/- 2,198)
test iter::bench_skip_chain_sum ... bench: 761,850 ns/iter (+/- 1,645)
test iter::bench_skip_ref_sum ... bench: 478,207 ns/iter (+/- 119,252)
test iter::bench_skip_sum ... bench: 315,614 ns/iter (+/- 3,054)
test iter::bench_skip_while_chain_ref_sum ... bench: 2,486,370 ns/iter (+/- 4,845)
test iter::bench_skip_while_chain_sum ... bench: 633,915 ns/iter (+/- 5,892)
test iter::bench_skip_while_ref_sum ... bench: 666,926 ns/iter (+/- 804)
test iter::bench_skip_while_sum ... bench: 444,405 ns/iter (+/- 571)
Many of the iterator adaptors will perform faster folds if they forward
to their inner iterator's folds, especially for inner types like `Chain`
which are optimized too. The following types are newly specialized:
| Type | `fold` | `rfold` |
| ----------- | ------ | ------- |
| `Enumerate` | ✓ | ✓ |
| `Filter` | ✓ | ✓ |
| `FilterMap` | ✓ | ✓ |
| `FlatMap` | exists | ✓ |
| `Fuse` | ✓ | ✓ |
| `Inspect` | ✓ | ✓ |
| `Peekable` | ✓ | N/A¹ |
| `Skip` | ✓ | N/A² |
| `SkipWhile` | ✓ | N/A¹ |
¹ not a `DoubleEndedIterator`
² `Skip::next_back` doesn't pull skipped items at all, but this couldn't
be avoided if `Skip::rfold` were to call its inner iterator's `rfold`.
Benchmarks
----------
In the following results, plain `_sum` computes the sum of a million
integers -- note that `sum()` is implemented with `fold()`. The
`_ref_sum` variants do the same on a `by_ref()` iterator, which is
limited to calling `next()` one by one, without specialized `fold`.
The `chain` variants perform the same tests on two iterators chained
together, to show a greater benefit of forwarding `fold` internally.
test iter::bench_enumerate_chain_ref_sum ... bench: 2,216,264 ns/iter (+/- 29,228)
test iter::bench_enumerate_chain_sum ... bench: 922,380 ns/iter (+/- 2,676)
test iter::bench_enumerate_ref_sum ... bench: 476,094 ns/iter (+/- 7,110)
test iter::bench_enumerate_sum ... bench: 476,438 ns/iter (+/- 3,334)
test iter::bench_filter_chain_ref_sum ... bench: 2,266,095 ns/iter (+/- 6,051)
test iter::bench_filter_chain_sum ... bench: 745,594 ns/iter (+/- 2,013)
test iter::bench_filter_ref_sum ... bench: 889,696 ns/iter (+/- 1,188)
test iter::bench_filter_sum ... bench: 667,325 ns/iter (+/- 1,894)
test iter::bench_filter_map_chain_ref_sum ... bench: 2,259,195 ns/iter (+/- 353,440)
test iter::bench_filter_map_chain_sum ... bench: 1,223,280 ns/iter (+/- 1,972)
test iter::bench_filter_map_ref_sum ... bench: 611,607 ns/iter (+/- 2,507)
test iter::bench_filter_map_sum ... bench: 611,610 ns/iter (+/- 472)
test iter::bench_fuse_chain_ref_sum ... bench: 2,246,106 ns/iter (+/- 22,395)
test iter::bench_fuse_chain_sum ... bench: 634,887 ns/iter (+/- 1,341)
test iter::bench_fuse_ref_sum ... bench: 444,816 ns/iter (+/- 1,748)
test iter::bench_fuse_sum ... bench: 316,954 ns/iter (+/- 2,616)
test iter::bench_inspect_chain_ref_sum ... bench: 2,245,431 ns/iter (+/- 21,371)
test iter::bench_inspect_chain_sum ... bench: 631,645 ns/iter (+/- 4,928)
test iter::bench_inspect_ref_sum ... bench: 317,437 ns/iter (+/- 702)
test iter::bench_inspect_sum ... bench: 315,942 ns/iter (+/- 4,320)
test iter::bench_peekable_chain_ref_sum ... bench: 2,243,585 ns/iter (+/- 12,186)
test iter::bench_peekable_chain_sum ... bench: 634,848 ns/iter (+/- 1,712)
test iter::bench_peekable_ref_sum ... bench: 444,808 ns/iter (+/- 480)
test iter::bench_peekable_sum ... bench: 317,133 ns/iter (+/- 3,309)
test iter::bench_skip_chain_ref_sum ... bench: 1,778,734 ns/iter (+/- 2,198)
test iter::bench_skip_chain_sum ... bench: 761,850 ns/iter (+/- 1,645)
test iter::bench_skip_ref_sum ... bench: 478,207 ns/iter (+/- 119,252)
test iter::bench_skip_sum ... bench: 315,614 ns/iter (+/- 3,054)
test iter::bench_skip_while_chain_ref_sum ... bench: 2,486,370 ns/iter (+/- 4,845)
test iter::bench_skip_while_chain_sum ... bench: 633,915 ns/iter (+/- 5,892)
test iter::bench_skip_while_ref_sum ... bench: 666,926 ns/iter (+/- 804)
test iter::bench_skip_while_sum ... bench: 444,405 ns/iter (+/- 571)
Add ..= to the parser
Add ..= to libproc_macro
Add ..= to ICH
Highlight ..= in rustdoc
Update impl Debug for RangeInclusive to ..=
Replace `...` to `..=` in range docs
Make the dotdoteq warning point to the ...
Add warning for ... in expressions
Updated more tests to the ..= syntax
Updated even more tests to the ..= syntax
Updated the inclusive_range entry in unstable book
Customize `<FlatMap as Iterator>::fold`
`FlatMap` can use internal iteration for its `fold`, which shows a
performance advantage in the new benchmarks:
test iter::bench_flat_map_chain_ref_sum ... bench: 4,354,111 ns/iter (+/- 108,871)
test iter::bench_flat_map_chain_sum ... bench: 468,167 ns/iter (+/- 2,274)
test iter::bench_flat_map_ref_sum ... bench: 449,616 ns/iter (+/- 6,257)
test iter::bench_flat_map_sum ... bench: 348,010 ns/iter (+/- 1,227)
... where the "ref" benches are using `by_ref()` that isn't optimized.
So this change shows a decent advantage on its own, but much more when
combined with a `chain` iterator that also optimizes `fold`.
Stabilize more APIs for the 1.20.0 release
In addition to the few stabilizations that have already landed, this cleans up the remaining APIs that are in `final-comment-period` right now to be stable by the 1.20.0 release
Make the "main" constructors of NonZero/Shared/Unique return Option
Per discussion in https://github.com/rust-lang/rust/issues/27730#issuecomment-303939441.
This is a breaking change to unstable APIs.
The old behavior is still available under the name `new_unchecked`. Note that only that one can be `const fn`, since `if` is currently not allowed in constant contexts.
In the case of `NonZero` this requires adding a new `is_zero` method to the `Zeroable` trait. I mildly dislike this, but it’s not much worse than having a `Zeroable` trait in the first place. `Zeroable` and `NonZero` are both unstable, this can be reworked later.
This removes the need for a 128 bit storage by making use of the fact that
there can be either no over/underflow, either one or both, and each time
the target type suffices to hold the limit for comparison.
The downside is that the code looks a bit more complex.
This test code included in this commit is from @oyvindln 's PR. They also
greatly helped fixing a number of errors I made along the way. Thanks a lot!
Delete deprecated & unstable range-specific `step_by`
Using the new one is annoying while this one exists, since the inherent method hides the one on iterator.
Tracking issue: #27741
Replacement: #41439
Deprecation: #42310 for 1.19
Fixes#41477
add `FromStr` Impl for `char`
fixes#24939.
is it possible to use pub(restricted) instead of using a stability attribute for the internal error representation? is it needed at all?
