my rust fork
https://www.rust-lang.org
00236a0d3d
Add new Tier 3 targets for ARMv6 Adds three new targets to support ARMv6 processors running bare-metal: * `armv6-none-eabi` - Arm ISA, soft-float * `armv6-none-eabihf` - Arm ISA, hard-float * `thumbv6-none-eabi` - Thumb-1 ISA, soft-float There is no `thumbv6-none-eabihf` target because as far as I can tell, hard-float isn't support with the Thumb-1 instruction set (and you need the ARMv6T2 extension to enable Thumb-2 support). The targets require ARMv6K as a minimum, which allows the two Arm ISA targets to have full CAS atomics. LLVM has a bug which means it emits some ARMv6K instructions even if you only call for ARMv6, and as no-one else has noticed the bug, and because basically all ARMv6 processors have ARMv6K, I think this is fine. The Thumb target also doesn't have any kind of atomics, just like the Armv5TE and Armv4 targets, because LLVM was emitting library calls to emulate them. Testing will be added to https://github.com/rust-embedded/aarch32 once the target is accepted. I already have tests for the other non-M arm-none-eabi targets, and those tests pass on these targets. > A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.) I have listed myself. If accepted, I'll talk to the Embedded Devices Working Group about adding this one to the rosta with all the others they support. > Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target. You might prefer `arm-none-eabi`, because `arm-unknown-linux-gnu` is an ARMv6 target - the implicit rule seems to be that if the Arm architecture version isn't specified, it's assumed to be v6. However, `armv6-none-eabi` seemed to fit better between `armv5te-none-eabi` and `armv7a/armv7r-none-eabi`. The hamming distance between `thumbv6-none-eabi` and `thumbv6m-none-eabi` is unfortunately low, but I don't know how to make it better. They *are* the ARMv6 and ARMv6-M targets, and its perhaps not worse than `armv7a-none-eabi` and `armv7r-none-eabi`. > Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users. No different to any other arm-none-eabi target. > Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions. Noted. > Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate... Same as other arm-none-eabi targets. > The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. Same as other arm-none-eabi targets. > Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via @) to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages. Noted. > Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target. Noted > Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target. (Having support in a fork of the backend is not sufficient, it must be upstream.) Noted |
||
|---|---|---|
| .github | ||
| compiler | ||
| library | ||
| LICENSES | ||
| src | ||
| tests | ||
| .clang-format | ||
| .editorconfig | ||
| .git-blame-ignore-revs | ||
| .gitattributes | ||
| .gitignore | ||
| .gitmodules | ||
| .ignore | ||
| .mailmap | ||
| bootstrap.example.toml | ||
| Cargo.lock | ||
| Cargo.toml | ||
| CODE_OF_CONDUCT.md | ||
| configure | ||
| CONTRIBUTING.md | ||
| COPYRIGHT | ||
| INSTALL.md | ||
| LICENSE-APACHE | ||
| license-metadata.json | ||
| LICENSE-MIT | ||
| package.json | ||
| README.md | ||
| RELEASES.md | ||
| REUSE.toml | ||
| rust-bors.toml | ||
| rustfmt.toml | ||
| triagebot.toml | ||
| typos.toml | ||
| x | ||
| x.ps1 | ||
| x.py | ||
| yarn.lock | ||
This is the main source code repository for Rust. It contains the compiler, standard library, and documentation.
Why Rust?
-
Performance: Fast and memory-efficient, suitable for critical services, embedded devices, and easily integrated with other languages.
-
Reliability: Our rich type system and ownership model ensure memory and thread safety, reducing bugs at compile-time.
-
Productivity: Comprehensive documentation, a compiler committed to providing great diagnostics, and advanced tooling including package manager and build tool (Cargo), auto-formatter (rustfmt), linter (Clippy) and editor support (rust-analyzer).
Quick Start
Read "Installation" from The Book.
Installing from Source
If you really want to install from source (though this is not recommended), see INSTALL.md.
Getting Help
See https://www.rust-lang.org/community for a list of chat platforms and forums.
Contributing
See CONTRIBUTING.md.
License
Rust is primarily distributed under the terms of both the MIT license and the Apache License (Version 2.0), with portions covered by various BSD-like licenses.
See LICENSE-APACHE, LICENSE-MIT, and COPYRIGHT for details.
Trademark
The Rust Foundation owns and protects the Rust and Cargo trademarks and logos (the "Rust Trademarks").
If you want to use these names or brands, please read the Rust language trademark policy.
Third-party logos may be subject to third-party copyrights and trademarks. See Licenses for details.