This message is emitted as guidance by the compiler when a developer attempts to reassign a value to an immutable variable. Following the message will always currently work, but it may not always be the best course of action; following the 'consider ...' messaging pattern provides a hint to the developer that it could be wise to explore other alternatives.
Also tweaked the message a bit by
- removing the hyphen, because in my opinion the hyphen makes the
message a bit harder to read, especially combined with the backticks;
- adding the word "be", because I think it's a bit clearer that way.
Improve trait/impl method discrepancy errors
* Use more accurate spans
* Clean up some code by removing previous hack
* Provide structured suggestions
Structured suggestions are particularly useful for cases where arbitrary self types are used, like in custom `Future`s, because the way to write `self: Pin<&mut Self>` is not necessarily self-evident when first encountered.
Issue 81508 fix
Fix#81508
**Problem**: When variable name is used incorrectly as path, error and warning point to undeclared/unused name, when in fact the name is used, just incorrectly (should be used as a variable, not part of a path).
**Summary for fix**: When path resolution errs, diagnostics checks for variables in ```ValueNS``` that have the same name (e.g., variable rather than path named Foo), and adds additional suggestion that user may actually intend to use the variable name rather than a path.
The fix does not suppress or otherwise change the *warning* that results. I did not find a straightforward way in the code to modify this, but would love to make changes here as well with any guidance.
Implement token-based handling of attributes during expansion
This PR modifies the macro expansion infrastructure to handle attributes
in a fully token-based manner. As a result:
* Derives macros no longer lose spans when their input is modified
by eager cfg-expansion. This is accomplished by performing eager
cfg-expansion on the token stream that we pass to the derive
proc-macro
* Inner attributes now preserve spans in all cases, including when we
have multiple inner attributes in a row.
This is accomplished through the following changes:
* New structs `AttrAnnotatedTokenStream` and `AttrAnnotatedTokenTree` are introduced.
These are very similar to a normal `TokenTree`, but they also track
the position of attributes and attribute targets within the stream.
They are built when we collect tokens during parsing.
An `AttrAnnotatedTokenStream` is converted to a regular `TokenStream` when
we invoke a macro.
* Token capturing and `LazyTokenStream` are modified to work with
`AttrAnnotatedTokenStream`. A new `ReplaceRange` type is introduced, which
is created during the parsing of a nested AST node to make the 'outer'
AST node aware of the attributes and attribute target stored deeper in the token stream.
* When we need to perform eager cfg-expansion (either due to `#[derive]` or `#[cfg_eval]`), we tokenize and reparse our target, capturing additional information about the locations of `#[cfg]` and `#[cfg_attr]` attributes at any depth within the target. This is a performance optimization, allowing us to perform less work in the typical case where captured tokens never have eager cfg-expansion run.
This PR modifies the macro expansion infrastructure to handle attributes
in a fully token-based manner. As a result:
* Derives macros no longer lose spans when their input is modified
by eager cfg-expansion. This is accomplished by performing eager
cfg-expansion on the token stream that we pass to the derive
proc-macro
* Inner attributes now preserve spans in all cases, including when we
have multiple inner attributes in a row.
This is accomplished through the following changes:
* New structs `AttrAnnotatedTokenStream` and `AttrAnnotatedTokenTree` are introduced.
These are very similar to a normal `TokenTree`, but they also track
the position of attributes and attribute targets within the stream.
They are built when we collect tokens during parsing.
An `AttrAnnotatedTokenStream` is converted to a regular `TokenStream` when
we invoke a macro.
* Token capturing and `LazyTokenStream` are modified to work with
`AttrAnnotatedTokenStream`. A new `ReplaceRange` type is introduced, which
is created during the parsing of a nested AST node to make the 'outer'
AST node aware of the attributes and attribute target stored deeper in the token stream.
* When we need to perform eager cfg-expansion (either due to `#[derive]` or `#[cfg_eval]`),
we tokenize and reparse our target, capturing additional information about the locations of
`#[cfg]` and `#[cfg_attr]` attributes at any depth within the target.
This is a performance optimization, allowing us to perform less work
in the typical case where captured tokens never have eager cfg-expansion run.
The lint used to be called `non-autolinks`, and linted more than just
bare URLs. Now, it is called `bare-urls` and only lints against bare
URLs. So, `bare-urls` is a better name for the test.
Expand derive invocations in left-to-right order
While derives were being collected in left-to-order order, the
corresponding `Invocation`s were being pushed in the wrong order.
Avoid `;` -> `,` recovery and unclosed `}` recovery from being too verbose
Those two recovery attempts have a very bad interaction that causes too
unnecessary output. Add a simple gate to avoid interpreting a `;` as a
`,` when there are unclosed braces.
Fix#83498.
Those two recovery attempts have a very bad interaction that causes too
unnecessary output. Add a simple gate to avoid interpreting a `;` as a
`,` when there are unclosed braces.
reduce threads spawned by ui-tests
The test harness already spawns enough tests to keep all cores busy.
Individual tests should keep their own threading to a minimum to avoid context switch overhead.
When running ui tests with lld enabled this shaves about 10% off that testsuite on my machine.
Resolves#81946
rustdoc: Don't generate blanket impls when running --show-coverage
`get_blanket_impls` is the slowest part of rustdoc, and the coverage pass
completely ignores blanket impls. This stops running it at all, and also
removes some unnecessary checks in `calculate_doc_coverage` that ignored
the impl anyway.
We don't currently measure --show-coverage in perf.rlo, but I tested
this locally on cargo and it brought the time down from 2.9 to 1.6
seconds.
This also adds back a commented-out test; Rustdoc has been able to deal with `impl trait` for almost a year now.
r? `@GuillaumeGomez`
get_blanket_impls is the slowest part of rustdoc, and the coverage pass
completely ignores blanket impls. This stops running it at all, and also
removes some unnecessary checks in `calculate_doc_coverage` that ignored
the impl anyway.
We don't currently measure --show-coverage in perf.rlo, but I tested
this locally on cargo and it brought the time down from 2.9 to 1.6
seconds.
the test harness already spawns enough tests for all cores, individual
tests should keep their own threading to a minimum to avoid context switch
overhead
some tests fail with 1 CGU, so explicit compile flags have been added
to keep their old behavior
Don't concatenate binders across types
Partially addresses #83737
There's actually two issues that I uncovered in #83737. The first is that we are concatenating bound vars across types, i.e. in
```
F: Fn(&()) -> &mut (dyn Future<Output = ()> + Unpin)
```
the bound vars on `Future` get set as `for<anon>` since those are the binders on `Fn(&()`. This is obviously wrong, since we should only concatenate directly nested trait refs. This is solved here by introducing a new `TraitRefBoundary` scope, that we put around the "syntactical" trait refs and basically don't allow concatenation across.
Now, this alone *shouldn't* be a super terrible problem. At least not until you consider the other issue, which is a much more elusive and harder to design a "perfect" fix. A repro can be seen in:
```
use core::future::Future;
async fn handle<F>(slf: &F)
where
F: Fn(&()) -> &mut (dyn for<'a> Future<Output = ()> + Unpin),
{
(slf)(&()).await;
}
```
Notice the `for<'a>` around `Future`. Here, `'a` is unused, so the `for<'a>` Binder gets changed to a `for<>` Binder in the generator witness, but the "local decl" still has it. This has heavy intersections with region anonymization and erasing. Luckily, it's not *super* common to find this unique set of circumstances. It only became apparently because of the first issue mentioned here. However, this *is* still a problem, so I'm leaving #83737 open.
r? `@nikomatsakis`
The issue was that the resulting debuginfo was too complex for LLVM to
translate into CodeView records correctly. As a result, it simply
ignored the debuginfo which meant Windows debuggers could not display
any closed over variables when stepping inside a closure.
This fixes that by spilling additional variables to the stack so that
the resulting debuginfo is simple (just `*my_variable.dbg.spill`) and
LLVM can generate the correct CV records.
