Handle no values cfgs with `--print=check-cfg`
This PR fix a bug with `--print=check-cfg`, where no values cfgs where not printed since we only printed cfgs that had at least one values.
The representation I choose is `CFG=`, since it doesn't correspond to any valid config, it also IMO nicely complements the `values()` (to indicate no values). Representing the absence of value by the absence of the value.
So for `cfg(feature, values())` we would print `feature=`.
I also added the missing tracking issue number in the doc.
r? ```@petrochenkov```
Align `Term` methods with `GenericArg` methods, add `Term::expect_*`
* `Term::ty` -> `Term::as_type`.
* `Term::ct` -> `Term::as_const`.
* Adds `Term::expect_type` and `Term::expect_const`, and uses them in favor of `.ty().unwrap()`, etc.
I could also shorten these to `as_ty` and then do `GenericArg::as_ty` as well, but I do think the `as_` is important to signal that this is a conversion method, and not a getter, like `Const::ty` is.
r? types
ARM Target Docs Update
Updates the ARM target docs, drawing more attention to the `arm-none-eabi` target group by placing all targets *within* that group as a sub-list in the Table of Contents.
Also updates the `armv4t-none-eabi` page (maintainer signoff: I'm that target's maintainer) to clarify that the page covers the arm version and the thumb version of the target, but that the target group page has the full info because there's nothing really specific to say for those targets.
Change pedantically incorrect OnceCell/OnceLock wording
While the semantic intent of a OnceCell/OnceLock is that it can only be written to once (upon init), the fact of the matter is that both these types offer a `take(&mut self) -> Option<T>` mechanism that, when successful, resets the cell to its initial state, thereby [technically allowing it to be written to again](https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=415c023a6ae1ef35f371a2d3bb1aa735)
Despite the fact that this can only happen with a mutable reference (generally only used during the construction of the OnceCell/OnceLock), it would be incorrect to say that the type itself as a whole *categorically* prevents being initialized or written to more than once (since it is possible to imagine an identical type only without the `take()` method that actually fulfills that contract).
To clarify, change "that cannot be.." to "that nominally cannot.." and add a note to OnceCell about what can be done with an `&mut Self` reference.
```@rustbot``` label +A-rustdocs
Add tracking issue and unstable book page for `"vectorcall"` ABI
Originally added in 2015 by #30567, the Windows `"vectorcall"` ABI didn't have a tracking issue until now.
Tracking issue: #124485
Make TLS accessors closures that return pointers
The current TLS macros generate a function that returns an `Option<&'static T>`. This is both risky as we lie about lifetimes, and necessitates that those functions are `unsafe`. By returning a `*const T` instead, the accessor function do not have safety requirements any longer and can be made closures without hassle. This PR does exactly that!
For native TLS, the closure approach makes it trivial to select the right accessor function at compile-time, which could result in a slight speed-up (I have the hope that the accessors are now simple enough for the MIR-inliner to kick in).
Make `WHERE_CLAUSES_OBJECT_SAFETY` a regular object safety violation
#### The issue
In #50781, we have known about unsound `where` clauses in function arguments:
```rust
trait Impossible {}
trait Foo {
fn impossible(&self)
where
Self: Impossible;
}
impl Foo for &() {
fn impossible(&self)
where
Self: Impossible,
{}
}
// `where` clause satisfied for the object, meaning that the function now *looks* callable.
impl Impossible for dyn Foo {}
fn main() {
let x: &dyn Foo = &&();
x.impossible();
}
```
... which currently segfaults at runtime because we try to call a method in the vtable that doesn't exist. :(
#### What did u change
This PR removes the `WHERE_CLAUSES_OBJECT_SAFETY` lint and instead makes it a regular object safety violation. I choose to make this into a hard error immediately rather than a `deny` because of the time that has passed since this lint was authored, and the single (1) regression (see below).
That means that it's OK to mention `where Self: Trait` where clauses in your trait, but making such a trait into a `dyn Trait` object will report an object safety violation just like `where Self: Sized`, etc.
```rust
trait Impossible {}
trait Foo {
fn impossible(&self)
where
Self: Impossible; // <~ This definition is valid, just not object-safe.
}
impl Foo for &() {
fn impossible(&self)
where
Self: Impossible,
{}
}
fn main() {
let x: &dyn Foo = &&(); // <~ THIS is where we emit an error.
}
```
#### Regressions
From a recent crater run, there's only one crate that relies on this behavior: https://github.com/rust-lang/rust/pull/124305#issuecomment-2122381740. The crate looks unmaintained and there seems to be no dependents.
#### Further
We may later choose to relax this (e.g. when the where clause is implied by the supertraits of the trait or something), but this is not something I propose to do in this FCP.
For example, given:
```
trait Tr {
fn f(&self) where Self: Blanket;
}
impl<T: ?Sized> Blanket for T {}
```
Proving that some placeholder `S` implements `S: Blanket` would be sufficient to prove that the same (blanket) impl applies for both `Concerete: Blanket` and `dyn Trait: Blanket`.
Repeating here that I don't think we need to implement this behavior right now.
----
r? lcnr
Show files produced by `--emit foo` in json artifact notifications
Right now it is possible to ask `rustc` to save some intermediate representation into one or more files with `--emit=foo`, but figuring out what exactly was produced is difficult. This pull request adds information about `llvm_ir` and `asm` intermediate files into notifications produced by `--json=artifacts`.
Related discussion: https://internals.rust-lang.org/t/easier-access-to-files-generated-by-emit-foo/20477
Motivation - `cargo-show-asm` parses those intermediate files and presents them in a user friendly way, but right now I have to apply some dirty hacks. Hacks make behavior confusing: https://github.com/hintron/computer-enhance/issues/35
This pull request introduces a new behavior: now `rustc` will emit a new artifact notification for every artifact type user asked to `--emit`, for example for `--emit asm` those will include all the `.s` files.
Most users won't notice this behavior, to be affected by it all of the following must hold:
- user must use `rustc` binary directly (when `cargo` invokes `rustc` - it consumes artifact notifications and doesn't emit anything)
- user must specify both `--emit xxx` and `--json artifacts`
- user must refuse to handle unknown artifact types
- user must disable incremental compilation (or deal with it better than cargo does, or use a workaround like `save-temps`) in order not to hit #88829 / #89149
Opt-in to `FulfillmentError` generation to avoid doing extra work in the new solver
In the new solver, we do additional trait solving in order to generate fulfillment errors, because all we have is the root obligation. This is problematic because there are many cases where we don't need the full error information, and instead are just calling `ObligationCtxt::select_all_or_error` to probe whether a predicate holds or not. This is also problematic because we use `ObligationCtxt`s within the error reporting machinery itself, and so we can definitely cause stack overflows:
a94483a5f2/compiler/rustc_trait_selection/src/solve/inspect/analyse.rs (L75-L84)
So instead, make `TraitEngine` and `ObligationCtxt` generic over `E: FulfillmentErrorLike<'tcx>`, and introduce a new `ScrubbedTraitError` which only stores whether the failure was due to a "true error" or an ambiguity. Then, introduce `ObligationCtxt::new_with_diagnostics` for the callsites that actually inspect their `FulfillmentError`s.
r? `@lcnr`
Number-wise, there are:
```
39 ObligationCtxt::new
32 ObligationCtxt::new_with_diagnostics
1 ObligationCtxt::new_generic
```
calls to each `ObligationCtxt` constructor, which suggests that there are indeed a lot of callsites that don't care about diagnostics.
Use parenthetical notation for `Fn` traits
Always use the `Fn(T) -> R` format when printing closure traits instead of `Fn<(T,), Output = R>`.
Address #67100:
```
error[E0277]: expected a `Fn()` closure, found `F`
--> file.rs:6:13
|
6 | call_fn(f)
| ------- ^ expected an `Fn()` closure, found `F`
| |
| required by a bound introduced by this call
|
= note: wrap the `F` in a closure with no arguments: `|| { /* code */ }`
note: required by a bound in `call_fn`
--> file.rs:1:15
|
1 | fn call_fn<F: Fn() -> ()>(f: &F) {
| ^^^^^^^^^^ required by this bound in `call_fn`
help: consider further restricting this bound
|
5 | fn call_any<F: std::any::Any + Fn()>(f: &F) {
| ++++++
```
Test codegen for `repr(packed,simd)` -> `repr(simd)`
This adds the codegen test originally requested in #117116 but exploiting the collection of features in FileCheck and compiletest to make it more resilient to expectations being broken by optimization levels. Mostly by presetting optimization levels for each revision of the tests.
I do not think the dereferenceable attribute's presence or absence is that important.
r? `@calebzulawski`
