In the AST the "then" block is represented as a `Block`. In HIR the
"then" block is represented as an `Expr` that happens to always be.
`ExprKind::Block`. By deconstructing the `ExprKind::Block` to extract
the block within, things print properly.
For `issue-82392.rs`, note that we no longer print a type after the
"then" block. This is good, it now matches how we don't print a type for
the "else" block. (Well, we do print a type after the "else" block, but
it's for the whole if/else.)
Also tighten up some of the pattern matching -- these block expressions
within if/else will never have labels.
Indents for `cbox` and `ibox` are 0 or `INDENT_UNIT` (4) except for a
couple of places which are `INDENT_UNIT - 1` for no clear reason.
This commit changes the three space indents to four spaces.
Rollup of 9 pull requests
Successful merges:
- #134446 (Stabilize the `cell_update` feature)
- #139307 (std: Add performance warnings to HashMap::get_disjoint_mut)
- #139450 (Impl new API `std::os::unix::fs::mkfifo` under feature `unix_fifo`)
- #139809 (Don't warn about `v128` in wasm ABI transition)
- #139852 (StableMIR: Implement `CompilerInterface`)
- #139945 (Extend HIR to track the source and syntax of a lifetime)
- #140028 (`deref_patterns`: support string and byte string literals in explicit `deref!("...")` patterns)
- #140181 (Remove `synstructure::Structure::underscore_const` calls.)
- #140232 (Remove unnecessary clones)
r? `@ghost`
`@rustbot` modify labels: rollup
Remove `synstructure::Structure::underscore_const` calls.
The `synstructure` docs say "This method is a no-op, underscore consts are used by default now." The behaviour change occurred going from `synstructure` version 0.13.0 to 0.13.1.
r? ``@SparrowLii``
`deref_patterns`: support string and byte string literals in explicit `deref!("...")` patterns
When `deref_patterns` is enabled, this allows string literal patterns to be used where `str` is expected and byte string literal patterns to be used where `[u8]` or `[u8; N]` is expected. This lets them be used in explicit `deref!("...")` patterns to match on `String`, `Box<str>`, `Vec<u8>`, `Box<[u8;N]>`, etc. (as well as to match on slices and arrays obtained through other means). Implementation-wise, this follows up on #138992: similar to how byte string literals matching on `&[u8]` is implemented, this changes the type of the patterns as determined by HIR typeck, which informs const-to-pat on how to translate them to THIR (though strings needed a bit of extra work since we need references to call `<str as PartialEq>::eq` in the MIR lowering for string equality tests).
This PR does not add support for implicit deref pattern syntax (e.g. `"..."` matching on `String`, as `string_deref_patterns` allows). I have that implemented locally, but I'm saving it for a follow-up PR[^1].
This also does not add support for using named or associated constants of type `&str` where `str` is expected (nor likewise with named byte string constants). It'd be possible to add that if there's an appetite for it, but I figure it's simplest to start with literals.
This is gated by the `deref_patterns` feature since it's motivated by deref patterns. That said, its impact reaches outside of deref patterns; it may warrant a separate experiment and feature gate, particularly factoring in the follow-up[^1]. Even without deref patterns, I think there's probably motivation for these changes.
The update to the unstable book added by this will conflict with #140022, so they shouldn't be merged at the same time.
Tracking issue for deref patterns: #87121
r? ``@oli-obk``
cc ``@Nadrieril``
[^1]: The piece missing from this PR to support implicit deref pattern syntax is to allow string literal patterns to implicitly dereference their scrutinees before matching (see #44849). As a consequence, it also makes examples like the one in that issue work (though it's still gated by `deref_patterns`). I can provide more information on how I've implemented it or open a draft if it'd help in reviewing this PR.
Extend HIR to track the source and syntax of a lifetime
An upcoming lint will want to be able to know if a lifetime is hidden (e.g. `&u8`, `ContainsLifetime`) or anonymous: (e.g. `&'_ u8`, `ContainsLifetime<'_>`). It will also want to know if the lifetime is related to a reference (`&u8`) or a path (`ContainsLifetime`).
r? ``@nnethercote``
StableMIR: Implement `CompilerInterface`
This PR implements part of [the document](https://hackmd.io/``@celinaval/H1lJBGse0).``
With `TablesWrapper` wrapped by `CompilerInterface`, the stable-mir's TLV stores a pointer to `CompilerInterface`, while the rustc-specific TLV stores a pointer to tables.
std: Add performance warnings to HashMap::get_disjoint_mut
Closes#139296
The `get_disjoint_mut` in `HashMap` also performs a complexity O(n^2) check. So we need to be reminded of that as well.
b5b0655a37/src/raw/mod.rs (L1216-L1220)
transmute: Mark edges by byte sets, not byte values
This leads to drastic performance improvements. For example, on the author's 2024 MacBook Pro, the time to convert the `Tree` representation of a `u64` to its equivalent DFA representation drops from ~8.5ms to ~1us, a reduction of ~8,500x. See `bench_dfa_from_tree`.
Similarly, the time to execute a transmutability query from `u64` to `u64` drops from ~35us to ~1.7us, a reduction of ~20x. See `bench_transmute`.
r? `@jswrenn`
Pass `args` to `run` instead of storing it in a field. This avoids the
need to clone it within `run`.
Also, change `args` from `Vec<String>` to `&[String]`, avoiding the need
for some vecs and clones.
I found these by grepping for `&[a-z_\.]*\.clone()`, i.e. expressions
like `&a.b.clone()`, which are sometimes unnecessary clones, and also
looking at clones nearby to cases like that.
make abi_unsupported_vector_types a hard error
Fixes https://github.com/rust-lang/rust/issues/116558 by completing the transition; see that issue for context. The lint was introduced with Rust 1.84 and this has been shown in cargo's future breakage reports since Rust 1.85, released 6 weeks ago, and so far we got 0 complaints by users. There's not even a backlink on the tracking issue. We did a [crater run](https://github.com/rust-lang/rust/pull/127731#issuecomment-2286736295) when the lint was originally added and found no breakage. So I don't think we need another crater run now, but I can do one if the team prefers that.
https://github.com/rust-lang/rust/issues/131800 is done, so for most current targets (in particular, all tier 1 and tier 2 targets) we have the information to implement this check (modulo the targets where we don't properly support SIMD vectors yet, see the sub-issues of https://github.com/rust-lang/rust/issues/116558). If a new target gets added in the future, it will default to reject all SIMD vector types until proper information is added, which is the default we want.
This will need approval by for `@rust-lang/lang.` Cc `@workingjubilee` `@veluca93`
try-job: test-various
try-job: armhf-gnu
try-job: dist-i586-gnu-i586-i686-musl
An upcoming lint will want to be able to know if a lifetime is
hidden (e.g. `&u8`, `ContainsLifetime`) or anonymous: (e.g. `&'_ u8`,
`ContainsLifetime<'_>`). It will also want to know if the lifetime is
related to a reference (`&u8`) or a path (`ContainsLifetime`).
In the `Tree` and `Dfa` representations of a type's layout, store byte
ranges rather than needing to separately store each byte value. This
permits us to, for example, represent a `u8` using a single 0..=255 edge
in the DFA rather than using 256 separate edges.
This leads to drastic performance improvements. For example, on the
author's 2024 MacBook Pro, the time to convert the `Tree` representation
of a `u64` to its equivalent DFA representation drops from ~8.5ms to
~1us, a reduction of ~8,500x. See `bench_dfa_from_tree`.
Similarly, the time to execute a transmutability query from `u64` to
`u64` drops from ~35us to ~1.7us, a reduction of ~20x. See
`bench_transmute`.
Clippy subtree update
r? `@Manishearth`
Cargo.lock update due to the Clippy version bump and because Clippy moved from rinja (unmaintained) to askama.
Last sync was skipped due to the askama issue and me not getting to fixing this in time.
compiletest: Use the new non-libtest executor by default
The new executor was implemented in #139660, but required a manual opt-in. This PR activates the new executor by default, but leaves the old libtest-based executor in place (temporarily) to make reverting easier if something unexpectedly goes horribly wrong.
Currently the new executor can be explicitly disabled by passing the `-N` flag to compiletest (e.g. `./x test ui -- -N`), but eventually that flag will be removed, alongside the removal of the libtest dependency. The flag is mostly there to make manual comparative testing easier if something does go wrong.
As before, there *should* be no user-visible difference between the old executor and the new executor.
---
I didn't get much of a response to my [call for testing thread on Zulip](https://rust-lang.zulipchat.com/#narrow/channel/122651-general/topic/Call.20for.20testing.3A.20New.20test.20executor.20for.20compiletest/with/512452105), and the reports I did get (along with my own usage) indicate that there aren't any problems. So I think it's reasonable to move forward with making this the default, in the hopes of being able to remove the libtest dependency relatively soon.
When the libtest dependency is removed, it should be reasonable to build compiletest against pre-built stage0 std by default, even after the stage0 redesign. (Though we should probably have at least one CI job using in-tree stage1 std instead, to guard against the possibility of the `#![feature(internal_output_capture)]` API actually changing.)
Refactor git change detection in bootstrap
While working on https://github.com/rust-lang/rust/pull/138395, I finally found the courage to delve into the insides of git path change detection in bootstrap, which is used (amongst other things) to detect if we should rebuilt od download `[llvm|rustc|gcc]`. I found it a bit hard to understand, and given that this code was historically quite fragile, I thought that it would be better to rebuild it from scratch.
The previous approach had a bunch of limitations:
- It separated the computation of "are there local changes?" and "what upstream SHA should we use?" even though these two things are intertwined.
- It used hacks to work around what happens on CI.
- It had special cases for CI scattered throughout the codebase, rather than centralized in one place.
- It wasn't documented enough and didn't have tests for the git behavior.
The current approach should hopefully resolve all of that. I implemented a single entrypoint called `check_path_modifications` (naming bikeshed pending, half of the time I spend on this PR was thinking about names, as it's quite tricky here..) that explicitly receives a mode of operation (in CI or outside CI), and accordingly figures out that upstream SHA that we should use for downloading artifacts and it also figures out if there are any local changes. Users of this function can then use this unified output to implement `download-ci-X` and other functionality. Notably, this change detection no longer uses `git merge-base`, which makes it easier to use and doesn't require setting up remotes.
I also added a bunch of integration tests that literally spawn a git repository on disk and then check that the function can deal with various situations (PR CI, auto/try CI, local builds).
After I built this inner layer, I used it for downloading GCC, LLVM and rustc. The latter two (and especially rustc) were using the `last_modified_commit` function before, but in all cases but one this function was actually only used to check if there are any local changes, which was IMO confusing. The LLVM handling would deserve a bit of refactoring, but that's a larger change that can be done as a follow-up.
I hope that the implementation is now clear and easy to understand, so that in combination with the tests we can have more confidence that it does what we want. I tried to include a lot of documentation in the code, so I won't be repeating the actual implementation details here, if there are any questions, I'll add the answers to the documentation too :)
The new approach explicitly supports three scenarios:
- Running on PR CI, where we have one upstream bors parent commit and one PR merge commit made by GitHub.
- Running on try/auto CI, where we have one upstream bors parent commit and one PR merge commit made by bors.
- Running locally, where we assume that we have at least one upstream bors parent commit in our git history.
I removed the handling of upstreams on CI, as I think that it shouldn't be needed and I considered it to be a hack. However, it's possible that there are other use-cases that I haven't considered, so I want to ask around if people have other situations than the three use-cases described above. If there are other such use-cases, I would like to include them in the new centralized implementation and add them to the git test suite, rather than going back to the old ways :)
In particular, the code before relied on `git merge-base`, but I don't see why we can't just lookup the most recent bors commit and assume that is a merge commit that is also upstream? I might be running into Chesterton's Fence here :)
CC `@pietroalbini` To make sure that this won't break downstream users of Rust's CI.
Best reviewed commit by commit.
Companion PRs:
- For testing beta: https://github.com/rust-lang/rust/pull/138597
r? `@onur-ozkan`
Fixes: https://github.com/rust-lang/rust/issues/101907
try-job: x86_64-gnu-aux
try-job: aarch64-gnu
try-job: dist-x86_64-apple
Currently the new executor can be explicitly disabled by passing the `-N` flag
to compiletest (e.g. `./x test ui -- -N`), but eventually that flag will be
removed, alongside the removal of the libtest dependency.
The `synstructure` docs say "This method is a no-op, underscore consts
are used by default now." The behaviour change occurred going from
`synstructure` version 0.13.0 to 0.13.1.
`rc""` more clear error message
here is small fix that provides better error message when user is trying to use `rc""` the same way it was made for `rb""`
example of it's work
```rust
|
2 | rc"\n";
| ^^ unknown prefix
|
= note: prefixed identifiers and literals are reserved since Rust 2021
help: use `cr` for a raw C-string
|
2 - rc"\n";
2 + cr"\n";
|
```
**related issue**
fixes#140170
cc `@cyrgani` (issue author)
Validate extension in `PathBuf::add_extension`
The extension is validated in `PathBuf::set_extension`, but not `add_extension`. Fix that. Check for both `/` and `\` path separators on Windows, even when the path is verbatim, since this is logically like `PathBuf::push` which normalizes separators (i.e., keeping the current behavior).
`PathBuf::add_extension` is tracked in #127292.
r? `@ChrisDenton`
Use `is_lang_item` and `as_lang_item` instead of handrolling their logic
Various cleanups and deduplication. Most notably `if is_lang_item(foo, bar) {} else if is_lang_item...` chains are turned into matches. No behaviour changes intended beyond turning ICEs into fatal "lang item not found" errors
Clean: rename `open_braces` to `open_delimiters` in lexer and move `make_unclosed_delims_error` into `diagnostics.rs`.
Clean code prepared for resolving #138401. To avoid having too many extraneous changes in one PR, I cleaned up some of the naming and method placement in lexer in this PR.
1. For the make_unclosed_delims_error function defined in mod.rs is only used in lexer, so moved into lexer, which enhances encapsulation.
2. For open_braces in TokenTreeDiagInfo the naming is not canonical, as Brace refers to `{...} ` and this variable can store all kinds of different Delimiters. so I named it open_delimiters.
r? `@chenyukang`
Rollup of 8 pull requests
Successful merges:
- #139617 (Use posix_spawn on cygwin)
- #139921 (improve diagnostic for raw pointer field access with ->)
- #140031 (compiletest: Fix deadline bugs in new executor)
- #140072 (handle function alignment in miri)
- #140104 (Fix auto diff failing on inherent impl blocks)
- #140124 (Update books)
- #140144 (Handle another negated literal in `eat_token_lit`.)
- #140149 (test_nan: ensure the NAN contant is quiet)
r? `@ghost`
`@rustbot` modify labels: rollup
