Apache NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. It is scalable from 8-bit to 64-bit microcontroller environments. The primary governing standards in NuttX are POSIX and ANSI standards.
NuttX adopts additional standard APIs from Unix and other common RTOSs, such as VxWorks. These APIs are used for functionality not available under the POSIX and ANSI standards. However, some APIs, like fork(), are not appropriate for deeply-embedded environments and are not implemented in NuttX.
For brevity, many parts of the documentation will refer to Apache NuttX as simply NuttX.
I'll be adding libstd support for NuttX in the future, but for now I'll just add the targets.
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target
> maintainers") on record to be CCed when issues arise regarding the target.
> (The mechanism to track and CC such developers may evolve over time.)
I will be the target maintainer for this target on matters that pertain to the NuttX part of the triple.
For matters pertaining to the riscv or arm part of the triple, there should be no difference from all other targets. If there are issues, I will address issues regarding the target.
> Targets must use naming consistent with any existing targets; for instance, a
> target for the same CPU or OS as an existing Rust target should use the same
> name for that CPU or OS. Targets should normally use the same names and
> naming conventions as used elsewhere in the broader ecosystem beyond Rust
> (such as in other toolchains), unless they have a very good reason to
> diverge. Changing the name of a target can be highly disruptive, especially
> once the target reaches a higher tier, so getting the name right is important
> even for a tier 3 target.
This is a new supported OS, so I have taken the origin target like `riscv32imac-unknown-none-elf` or `thumbv7m-none-eabi`
and changed the `os` section to `nuttx`.
> Target names should not introduce undue confusion or ambiguity unless
> absolutely necessary to maintain ecosystem compatibility. For example, if
> the name of the target makes people extremely likely to form incorrect
> beliefs about what it targets, the name should be changed or augmented to
> disambiguate it.
I feel that the target name does not introduce any ambiguity.
> Tier 3 targets may have unusual requirements to build or use, but must not
> create legal issues or impose onerous legal terms for the Rust project or for
> Rust developers or users.
The only unusual requirement for building the compiler-builtins crate is a standard RISC-V or ARM C compiler supported by cc-rs, and using this target does not require any additional software beyond what is shipped by rustup.
> The target must not introduce license incompatibilities.
All of the additional code will use Apache-2.0.
> Anything added to the Rust repository must be under the standard Rust
> license (`MIT OR Apache-2.0`).
Agreed, and there is no problem here.
> The target must not cause the Rust tools or libraries built for any other
> host (even when supporting cross-compilation to the target) to depend
> on any new dependency less permissive than the Rust licensing policy. This
> applies whether the dependency is a Rust crate that would require adding
> new license exceptions (as specified by the `tidy` tool in the
> rust-lang/rust repository), or whether the dependency is a native library
> or binary. In other words, the introduction of the target must not cause a
> user installing or running a version of Rust or the Rust tools to be
> subject to any new license requirements.
No new dependencies are added.
> Compiling, linking, and emitting functional binaries, libraries, or other
> code for the target (whether hosted on the target itself or cross-compiling
> from another target) must not depend on proprietary (non-FOSS) libraries.
> Host tools built for the target itself may depend on the ordinary runtime
> libraries supplied by the platform and commonly used by other applications
> built for the target, but those libraries must not be required for code
> generation for the target; cross-compilation to the target must not require
> such libraries at all. For instance, `rustc` built for the target may
> depend on a common proprietary C runtime library or console output library,
> but must not depend on a proprietary code generation library or code
> optimization library. Rust's license permits such combinations, but the
> Rust project has no interest in maintaining such combinations within the
> scope of Rust itself, even at tier 3.
Linking is performed by rust-lld
> "onerous" here is an intentionally subjective term. At a minimum, "onerous"
> legal/licensing terms include but are *not* limited to: non-disclosure
> requirements, non-compete requirements, contributor license agreements
> (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms,
> requirements conditional on the employer or employment of any particular
> Rust developers, revocable terms, any requirements that create liability
> for the Rust project or its developers or users, or any requirements that
> adversely affect the livelihood or prospects of the Rust project or its
> developers or users.
There are no terms. NuttX is distributed under the Apache 2.0 license.
> Neither this policy nor any decisions made regarding targets shall create any
> binding agreement or estoppel by any party. If any member of an approving
> Rust team serves as one of the maintainers of a target, or has any legal or
> employment requirement (explicit or implicit) that might affect their
> decisions regarding a target, they must recuse themselves from any approval
> decisions regarding the target's tier status, though they may otherwise
> participate in discussions.
I'm not the reviewer here.
> This requirement does not prevent part or all of this policy from being
> cited in an explicit contract or work agreement (e.g. to implement or
> maintain support for a target). This requirement exists to ensure that a
> developer or team responsible for reviewing and approving a target does not
> face any legal threats or obligations that would prevent them from freely
> exercising their judgment in such approval, even if such judgment involves
> subjective matters or goes beyond the letter of these requirements.
Again I'm not the reviewer here.
> Tier 3 targets should attempt to implement as much of the standard libraries
> as possible and appropriate (`core` for most targets, `alloc` for targets
> that can support dynamic memory allocation, `std` for targets with an
> operating system or equivalent layer of system-provided functionality), but
> may leave some code unimplemented (either unavailable or stubbed out as
> appropriate), whether because the target makes it impossible to implement or
> challenging to implement. The authors of pull requests are not obligated to
> avoid calling any portions of the standard library on the basis of a tier 3
> target not implementing those portions.
> The target must provide documentation for the Rust community explaining how
> to build for the target, using cross-compilation if possible. If the target
> supports running binaries, or running tests (even if they do not pass), the
> documentation must explain how to run such binaries or tests for the target,
> using emulation if possible or dedicated hardware if necessary.
Building is described in platform support doc, but libstd is not supported now,
I'll implement it later.
> Tier 3 targets must not impose burden on the authors of pull requests, or
> other developers in the community, to maintain the target. In particular,
> do not post comments (automated or manual) on a PR that derail or suggest a
> block on the PR based on a tier 3 target. Do not send automated messages or
> notifications (via any medium, including via `@`) to a PR author or others
> involved with a PR regarding a tier 3 target, unless they have opted into
> such messages.
Understood.
> Backlinks such as those generated by the issue/PR tracker when linking to
> an issue or PR are not considered a violation of this policy, within
> reason. However, such messages (even on a separate repository) must not
> generate notifications to anyone involved with a PR who has not requested
> such notifications.
Understood.
> Patches adding or updating tier 3 targets must not break any existing tier 2
> or tier 1 target, and must not knowingly break another tier 3 target without
> approval of either the compiler team or the maintainers of the other tier 3
> target.
I believe I didn't break any other target.
> In particular, this may come up when working on closely related targets,
> such as variations of the same architecture with different features. Avoid
> introducing unconditional uses of features that another variation of the
> target may not have; use conditional compilation or runtime detection, as
> appropriate, to let each target run code supported by that target.
I think there are no such problems in this PR.
> Tier 3 targets must be able to produce assembly using at least one of
> rustc's supported backends from any host target. (Having support in a fork
> of the backend is not sufficient, it must be upstream.)
Yes, it use standard RISCV or ARM backend to generate assembly.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Represent type-level consts with new-and-improved `hir::ConstArg`
### Summary
This is a step toward `min_generic_const_exprs`. We now represent all const
generic arguments using an enum that differentiates between const *paths*
(temporarily just bare const params) and arbitrary anon consts that may perform
computations. This will enable us to cleanly implement the `min_generic_const_args`
plan of allowing the use of generics in paths used as const args, while
disallowing their use in arbitrary anon consts. Here is a summary of the salient
aspects of this change:
- Add `current_def_id_parent` to `LoweringContext`
This is needed to track anon const parents properly once we implement
`ConstArgKind::Path` (which requires moving anon const def-creation
outside of `DefCollector`).
- Create `hir::ConstArgKind` enum with `Path` and `Anon` variants. Use it in the
existing `hir::ConstArg` struct, replacing the previous `hir::AnonConst` field.
- Use `ConstArg` for all instances of const args. Specifically, use it instead
of `AnonConst` for assoc item constraints, array lengths, and const param
defaults.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at https://github.com/rust-lang/rust/issues/127009.
### Followup items post-merge
- Use `ConstArgKind::Path` for all const paths, not just const params.
- Fix (no github dont close this issue) #127009
- If a path in generic args doesn't resolve as a type, try to resolve as a const
instead (do this in rustc_resolve). Then remove the special-casing from
`rustc_ast_lowering`, so that all params will automatically be lowered as
`ConstArgKind::Path`.
- (?) Consider making `const_evaluatable_unchecked` a hard error, or at least
trying it in crater
r? `@BoxyUwU`
Rollup of 8 pull requests
Successful merges:
- #127418 (Wrap too long type name)
- #127594 (Fuchsia status code match arm)
- #127835 (Fix ICE in suggestion caused by `⩵` being recovered as `==`)
- #127858 (match lowering: Rename `MatchPair` to `MatchPairTree`)
- #127871 (Mention that type parameters are used recursively on bivariance error)
- #127913 (remove `debug-logging` default from tools profile)
- #127925 (Remove tag field from `Relation`s)
- #127929 (Use more accurate span for `addr_of!` suggestion)
r? `@ghost`
`@rustbot` modify labels: rollup
Use more accurate span for `addr_of!` suggestion
Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
Remove tag field from `Relation`s
Can just use the relation name w/ `std::any::type_name`. Also changes some printing to use instrument. Also changes some instrument levels to `trace` since I expect relations are somewhat hot, so having them print on debug is probably noisy.
r? lcnr
remove `debug-logging` default from tools profile
`debug-logging` conflicts with `download-rustc` option, and doesn't really make sense to enable it for a profile that is used for tool development.
Mention that type parameters are used recursively on bivariance error
Right now when a type parameter is used recursively, even with indirection (so it has a finite size) we say that the type parameter is unused:
```
struct B<T>(Box<B<T>>);
```
This is confusing, because the type parameter is *used*, it just doesn't have its variance constrained. This PR tweaks that message to mention that it must be used *non-recursively*.
Not sure if we should actually mention "variance" here, but also I'd somewhat prefer we don't keep the power users in the dark w.r.t the real underlying issue, which is that the variance isn't constrained. That technical detail is reserved for a note, though.
cc `@fee1-dead`
Fixes#118976Fixes#26283Fixes#53191Fixes#105740Fixes#110466
match lowering: Rename `MatchPair` to `MatchPairTree`
In #120904, `MatchPair` became able to store other match pairs as children, forming a tree. That has made the old name confusing, so this patch renames the type to `MatchPairTree`.
This PR also includes a patch renaming the `test` method to `pick_test_for_match_pair`, since it would conflict with the main change.
r? `@Nadrieril`
Fix ICE in suggestion caused by `⩵` being recovered as `==`
The second suggestion shown here would previously incorrectly assume that the span corresponding to `⩵` was 2 bytes wide composed by 2 1 byte wide chars, so a span pointing at `==` could point only at one of the `=` to remove it. Instead, we now replace the whole thing (as we should have the whole time):
```
error: unknown start of token: \u{2a75}
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: Unicode character '⩵' (Two Consecutive Equals Signs) looks like '==' (Double Equals Sign), but it is not
|
LL | const A: usize == 2;
| ~~
error: unexpected `==`
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: try using `=` instead
|
LL | const A: usize = 2;
| ~
```
Fix#127823.
Fuchsia status code match arm
Adds a match arm for the Fuchsia status code upon a process abort. An additional change moves the Windows status code down into the match arm itself instead of being defined as a constant elsewhere.
r? tmandry
Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
Rollup of 6 pull requests
Successful merges:
- #124881 (Use ThreadId instead of TLS-address in `ReentrantLock`)
- #127656 (make pub_use_of_private_extern_crate show up in cargo's future breakage reports)
- #127748 (Use Option's discriminant as its size hint)
- #127854 (Add internal lint for detecting non-glob imports of `rustc_type_ir::inherent`)
- #127908 (Update extern linking documentation)
- #127919 (Allow a git command for getting the current branch in bootstrap to fail)
r? `@ghost`
`@rustbot` modify labels: rollup
The second suggestion shown here would previously incorrectly assume that the span corresponding to `⩵` was 2 bytes wide composed by 2 1 byte wide chars, so a span pointing at `==` could point only at one of the `=` to remove it. Instead, we now replace the whole thing (as we should have the whole time):
```
error: unknown start of token: \u{2a75}
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: Unicode character '⩵' (Two Consecutive Equals Signs) looks like '==' (Double Equals Sign), but it is not
|
LL | const A: usize == 2;
| ~~
error: unexpected `==`
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: try using `=` instead
|
LL | const A: usize = 2;
| ~
```
Update extern linking documentation
In particular, remove the note saying cdylibs can't link against dylibs — that hasn't been true for over four years.
* 2019-11-07: note is written: b54e8ecc2e
* 2020-01-23: restriction is lifted (without updating docs): 72aaa3a414
Use Option's discriminant as its size hint
I was looking at this in MIR after a question on discord, and noticed that it ends up with a switch in MIR (<https://rust.godbolt.org/z/3q4cYnnb3>), which it doesn't need because (as `Option::as_slice` uses) the discriminant is already the length.
make pub_use_of_private_extern_crate show up in cargo's future breakage reports
This has been a lint for many years.
However, turns out that outright removing it right now would lead to [tons of crater regressions](https://github.com/rust-lang/rust/pull/127656#issuecomment-2233288534) due to crates depending on an ancient version of `bitflags`. So for now this PR just makes this future-compat lint show up in cargo's reports, so people are warned when they use a dependency that is affected by this.
r? `@petrochenkov`
Use ThreadId instead of TLS-address in `ReentrantLock`
Fixes#123458
`ReentrantLock` currently uses the address of a thread local variable as an ID that's unique across all currently running threads. This can lead to uninituitive behavior as in #123458 if TLS blocks get reused. This PR changes `ReentrantLock` to instead use the `ThreadId` provided by `std` as the unique ID. `ThreadId` guarantees uniqueness across the lifetime of the whole process, so we don't need to worry about reusing IDs of terminated threads. The main appeal of this PR is thus the possibility of changing the `ReentrantLock` API to guarantee that if a thread leaks a lock guard, no other thread may ever acquire that lock again.
This does entail some complications:
- previously, the only way to retrieve the current thread ID would've been using `thread::current().id()` which creates a temporary `Arc` and which isn't available in TLS destructors. As part of this PR, the thread ID instead gets cached in its own thread local, as suggested [here](https://github.com/rust-lang/rust/issues/123458#issuecomment-2038207704).
- `ThreadId` is always 64-bit whereas the current implementation uses a usize-sized ID. Since this ID needs to be updated atomically, we can't simply use a single atomic variable on 32 bit platforms. Instead, we fall back to using a (sound) seqlock on 32-bit platforms, which works because only one thread at a time can write to the ID. This seqlock is technically susceptible to the ABA problem, but the attack vector to create actual unsoundness has to be very specific:
- You would need to be able to lock+unlock the lock exactly 2^31 times (or a multiple thereof) while a thread trying to lock it sleeps
- The sleeping thread would have to suspend after reading one half of the thread id but before reading the other half
- The teared result from combining the halves of the thread ID would have to exactly line up with the sleeping thread's ID
The risk of this occurring seems slim enough to be acceptable to me, but correct me if I'm wrong. This also means that the size of the lock increases by 8 bytes on 32-bit platforms, but this also shouldn't be an issue.
Performance wise, I did some crude testing of the only case where this could lead to real slowdowns, which is the case of locking a `ReentrantLock` that's already locked by the current thread. On both aarch64 and x86-64, there is (expectedly) pretty much no performance hit. I didn't have any 32-bit platforms to test the seqlock performance on, so I did the next best thing and just forced the 64-bit platforms to use the seqlock implementation. There, the performance degraded by ~1-2ns/(lock+unlock) on x86-64 and ~6-8ns/(lock+unlock) on aarch64, which is measurable but seems acceptable to me seeing as 32-bit platforms should be a small minority anyways.
cc `@joboet` `@RalfJung` `@CAD97`
This changes `ReentrantLock` to use `ThreadId` for the thread ownership check instead of the address of a thread local. Unlike TLS blocks, `ThreadId` is guaranteed to be unique across the lifetime of the process, so if any thread ever terminates while holding a `ReentrantLockGuard`, no other thread may ever acquire that lock again.
On platforms with 64-bit atomics, this is a very simple change. On other platforms, the approach used is slightly more involved, as explained in the module comment.
This also adds a `CURRENT_ID` thread local in addition to the already existing `CURRENT`. This allows us to access the current `ThreadId` without the relatively heavy machinery used by `thread::current().id()`.
Fix ambiguous cases of multiple & in elided self lifetimes
This change proposes simpler rules to identify the lifetime on `self` parameters which may be used to elide a return type lifetime.
## The old rules
(copied from [this comment](https://github.com/rust-lang/rust/pull/117967#discussion_r1420554242))
Most of the code can be found in [late.rs](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html) and acts on AST types. The function [resolve_fn_params](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html#2006), in the success case, returns a single lifetime which can be used to elide the lifetime of return types.
Here's how:
* If the first parameter is called self then we search that parameter using "`self` search rules", below
* If no unique applicable lifetime was found, search all other parameters using "regular parameter search rules", below
(In practice the code does extra work to assemble good diagnostic information, so it's not quite laid out like the above.)
### `self` search rules
This is primarily handled in [find_lifetime_for_self](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html#2118) , and is described slightly [here](https://github.com/rust-lang/rust/issues/117715#issuecomment-1813115477) already. The code:
1. Recursively walks the type of the `self` parameter (there's some complexity about resolving various special cases, but it's essentially just walking the type as far as I can see)
2. Each time we find a reference anywhere in the type, if the **direct** referent is `Self` (either spelled `Self` or by some alias resolution which I don't fully understand), then we'll add that to a set of candidate lifetimes
3. If there's exactly one such unique lifetime candidate found, we return this lifetime.
### Regular parameter search rules
1. Find all the lifetimes in each parameter, including implicit, explicit etc.
2. If there's exactly one parameter containing lifetimes, and if that parameter contains exactly one (unique) lifetime, *and if we didn't find a `self` lifetime parameter already*, we'll return this lifetime.
## The new rules
There are no changes to the "regular parameter search rules" or to the overall flow, only to the `self` search rules which are now:
1. Recursively walks the type of the `self` parameter, searching for lifetimes of reference types whose referent **contains** `Self`.[^1]
2. Keep a record of:
* Whether 0, 1 or n unique lifetimes are found on references encountered during the walk
4. If no lifetime was found, we don't return a lifetime. (This means other parameters' lifetimes may be used for return type lifetime elision).
5. If there's one lifetime found, we return the lifetime.
6. If multiple lifetimes were found, we abort elision entirely (other parameters' lifetimes won't be used).
[^1]: this prevents us from considering lifetimes from inside of the self-type
## Examples that were accepted before and will now be rejected
```rust
fn a(self: &Box<&Self>) -> &u32
fn b(self: &Pin<&mut Self>) -> &String
fn c(self: &mut &Self) -> Option<&Self>
fn d(self: &mut &Box<Self>, arg: &usize) -> &usize // previously used the lt from arg
```
### Examples that change the elided lifetime
```rust
fn e(self: &mut Box<Self>, arg: &usize) -> &usize
// ^ new ^ previous
```
## Examples that were rejected before and will now be accepted
```rust
fn f(self: &Box<Self>) -> &u32
```
---
*edit: old PR description:*
```rust
struct Concrete(u32);
impl Concrete {
fn m(self: &Box<Self>) -> &u32 {
&self.0
}
}
```
resulted in a confusing error.
```rust
impl Concrete {
fn n(self: &Box<&Self>) -> &u32 {
&self.0
}
}
```
resulted in no error or warning, despite apparent ambiguity over the elided lifetime.
Fixes https://github.com/rust-lang/rust/issues/117715
`debug-logging` conflicts with `download-rustc` option, and doesn't really
make sense to enable it for a profile that is used for tool development.
Signed-off-by: onur-ozkan <work@onurozkan.dev>
Rollup of 7 pull requests
Successful merges:
- #127491 (Migrate 8 very similar FFI `run-make` tests to rmake)
- #127687 (Const-to-pattern-to-MIR cleanup)
- #127822 (Migrate `issue-85401-static-mir`, `missing-crate-dependency` and `unstable-flag-required` `run-make` tests to rmake)
- #127842 (Remove `TrailingToken`.)
- #127864 (cleanup: remove support for 3DNow! cpu features)
- #127899 (Mark myself as on leave)
- #127901 (Add missing GHA group for building `llvm-bitcode-linker`)
r? `@ghost`
`@rustbot` modify labels: rollup
In particular, remove the note saying cdylibs can't link against dylibs — that hasn't been true for over four years.
* 2019-11-07: note is written: b54e8ecc2e
* 2020-01-23: restriction is lifted (without updating docs): 72aaa3a414
cleanup: remove support for 3DNow! cpu features
In llvm/llvm-project@f0eb5587ce all support for 3DNow! intrinsics and instructions were removed. Per the commit message there, only AMD chips between 1998 and 2011 or so actually supported these instructions, and they were effectively replaced by SSE which was available on many more chips. I'd be very surprised if anyone had ever used these from Rust.
`@rustbot` label: +llvm-main
Remove `TrailingToken`.
It's used in `Parser::collect_tokens_trailing_token` to decide whether to capture a trailing token. But the callers actually know whether to capture a trailing token, so it's simpler for them to just pass in a bool.
Also, the `TrailingToken::Gt` case was weird, because it didn't result in a trailing token being captured. It could have been subsumed by the `TrailingToken::MaybeComma` case, and it effectively is in the new code.
r? `@petrochenkov`
Migrate `issue-85401-static-mir`, `missing-crate-dependency` and `unstable-flag-required` `run-make` tests to rmake
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
try-job: armhf-gnu
try-job: test-various
try-job: x86_64-msvc
try-job: aarch64-apple
try-job: dist-x86_64-linux
Const-to-pattern-to-MIR cleanup
Now that all uses of constants without structural equality are hard errors, there's a bunch of cleanup we can do in the code that handles patterns: we can always funnel patterns through valtrees first (rather than having a fallback path for when valtree construction fails), and we can make sure that if we emit a `PartialEq` call it is not calling anything user-defined.
To keep the error messages the same, I made valtree construction failures return the information of *which* type it is that cannot be valtree'd. `search_for_structural_match_violation` is now not needed any more at all, so I removed it.
r? `@oli-obk`
Migrate 8 very similar FFI `run-make` tests to rmake
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
There are some more of these, but while the code is almost always the same, I want to keep the number reasonable so my doc comments can be inspected for potential inaccuracies. Tell me if 8 is too much, I can cut this down.
For the tracking issue:
- issue-25581
- extern-fn-with-extern-types
- extern-fn-struct-passing-abi
- longjmp-across-rust
- static-extern-type
- extern-fn-explicit-align
- extern-fn-with-packed-struct
- extern-fn-mangle
It's used in `Parser::collect_tokens_trailing_token` to decide whether
to capture a trailing token. But the callers actually know whether to
capture a trailing token, so it's simpler for them to just pass in a
bool.
Also, the `TrailingToken::Gt` case was weird, because it didn't result
in a trailing token being captured. It could have been subsumed by the
`TrailingToken::MaybeComma` case, and it effectively is in the new code.
Rollup of 8 pull requests
Successful merges:
- #127077 (Make language around `ToOwned` for `BorrowedFd` more precise)
- #127783 (Put the dots back in RTN pretty printing)
- #127787 (Migrate `atomic-lock-free` to `rmake`)
- #127810 (Rename `tcx` to `cx` in `rustc_type_ir`)
- #127878 (Fix associated item removal suggestion)
- #127886 (Accurate `use` rename suggestion span)
- #127888 (More accurate span for type parameter suggestion)
- #127889 (More accurate span for anonymous argument suggestion)
r? `@ghost`
`@rustbot` modify labels: rollup
More accurate span for anonymous argument suggestion
Use smaller span for suggesting adding `_:` ahead of a type:
```
error: expected one of `(`, `...`, `..=`, `..`, `::`, `:`, `{`, or `|`, found `)`
--> $DIR/anon-params-denied-2018.rs:12:47
|
LL | fn foo_with_qualified_path(<Bar as T>::Baz);
| ^ expected one of 8 possible tokens
|
= note: anonymous parameters are removed in the 2018 edition (see RFC 1685)
help: explicitly ignore the parameter name
|
LL | fn foo_with_qualified_path(_: <Bar as T>::Baz);
| ++
```
