tests: Port `jobserver-error` to rmake.rs
Part of #121876.
This PR ports `tests/run-make/jobserver-error` to rmake.rs, and is basically #128789 slightly adjusted.
The complexity involved here is mostly how to get `/dev/null/` piping to fd 3 working with std `Command`, whereas with a shell this is much easier (as is evident with the `Makefile` version).
Supersedes #128789.
This PR is co-authored with `@Oneirical` and `@coolreader18.`
try-job: aarch64-gnu
try-job: i686-gnu-1
try-job: x86_64-gnu-debug
try-job: x86_64-gnu-llvm-18-1
Add test for checking used glibc symbols
This test checks that we do not use too new glibc symbols in the compiler on x64 GNU Linux, in order not to break our [glibc promises](https://blog.rust-lang.org/2022/08/01/Increasing-glibc-kernel-requirements.html).
One thing that isn't solved in the PR yet is to make sure that this test will only run on `dist` CI, more specifically on the `dist-x86_64-linux` runner, in the opt-dist post-optimization tests (it can fail elsewhere, that doesn't matter). Any suggestions on how to do that are welcome.
Fixes: https://github.com/rust-lang/rust/issues/134037
r? `@jieyouxu`
Detect missing fields with default values and suggest `..`
When a struct ctor use has missing fields, if all those missing fields have defaults, suggest `..`:
```
error[E0063]: missing fields `field1` and `field2` in initializer of `S`
--> $DIR/non-exhaustive-ctor.rs:16:13
|
LL | let _ = S { field: () };
| ^ missing `field1` and `field2`
|
help: all remaining fields have default values, you can use those values with `..`
|
LL | let _ = S { field: (), .. };
| ++++
```
Properly note when query stack is being cut off
cc #70953
also, i'm not certain whether we should even limit this at all. i don't see the problem with printing the full query stack, apparently it was limited b/c we used to ICE? but we're already printing the full stack to disk since #108714.
r? oli-obk
Point at invalid utf-8 span on user's source code
```
error: couldn't read `$DIR/not-utf8-bin-file.rs`: stream did not contain valid UTF-8
--> $DIR/not-utf8-2.rs:6:5
|
LL | include!("not-utf8-bin-file.rs");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: byte `193` is not valid utf-8
--> $DIR/not-utf8-bin-file.rs:2:14
|
LL | let _ = "�|�␂!5�cc␕␂��";
| ^
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
```
When we attempt to load a Rust source code file, if there is a OS file failure we try reading the file as bytes. If that succeeds we try to turn it into UTF-8. If *that* fails, we provide additional context about *where* the file has the first invalid UTF-8 character.
Fix#76869.
Fix ICE-133117: multiple never-pattern arm doesn't have false_edge_start_block
Fixes#133117 , and close fixes#133063 , fixes#130779
In order to fix ICE-133117, at first I needed to tackle to ICE-133063 (this fixed 130779 as well).
### ICE-133063 and ICE-130779
This ICE is caused by those steps:
1. An arm has or-pattern, and all of the sub-candidates are never-pattern
2. In that case, all sub-candidates are removed in remove_never_subcandidates(). So the arm (candidate) has no sub-candidate.
3. In the current implementation, if there is no sub-candidate, the function assigns `pre_binding_block` into the candidate ([here](https://github.com/rust-lang/rust/blob/master/compiler/rustc_mir_build/src/builder/matches/mod.rs#L2002-L2004)). However, otherwise_block should be assigned to the candidate as well, because the otherwise_block is unwrapped in multiple place (like in lower_match_tree()). As a result, it causes the panic.
I simply added the same block as pre_binding_block into otherwise_block, but I'm wondering if there is a better block to assign to otherwise_block (is it ok to assign the same block into pre_binding and otherwise?)
### ICE-133117
This is caused by those steps:
1. There are two arms, both are or-pattern and each has one match-pair (in the test code, both are `(!|!)`), and the second arm has a guard.
2. In match_candidate() for the first arm, it expands the second arm’s sub-candidates as well ([here](https://github.com/rust-lang/rust/blob/master/compiler/rustc_mir_build/src/builder/matches/mod.rs#L1800-L1805)). As a result, the root candidate of the second arm is not evaluated/modified in match_candidate(). So a false_edge_start_block is not assigned to the candidate.
3. merge_trivial_subcandidates() is called against the candidate for the second arm. It just returns immediately because the candidate has a guard. So a flase_edge_start_block is not assigned to the candidate also in this function.
4. remove_never_subcandidates() is called against the candidate. Since all sub-candidates are never-pattern. they are removed.
5. In lower_match_tree(), since there is no sub-candidate for the candidate, the candidate itself is evaluated in visit_leave_rev ([here](https://github.com/rust-lang/rust/blob/master/compiler/rustc_mir_build/src/builder/matches/mod.rs#L1532)). Because the candidate has no false_edge_start_block, it causes the panic.
So I modified the order of if blocks in merge_trivial_subcandidates() to assign a false_edge_start_block if the candidate doesn't have.
Don't pick `T: FnPtr` nested goals as the leaf goal in diagnostics for new solver
r? `@lcnr`
See `tests/ui/traits/next-solver/diagnostics/dont-pick-fnptr-bound-as-leaf.rs` for a minimized example of what code this affects the diagnostics off. The output of running nightly `-Znext-solver` on that test is the following:
```
error[E0277]: the trait bound `Foo: Trait` is not satisfied
--> src/lib.rs:14:20
|
14 | requires_trait(Foo);
| -------------- ^^^ the trait `FnPtr` is not implemented for `Foo`
| |
| required by a bound introduced by this call
|
note: required for `Foo` to implement `Trait`
--> src/lib.rs:7:16
|
7 | impl<T: FnPtr> Trait for T {}
| ----- ^^^^^ ^
| |
| unsatisfied trait bound introduced here
note: required by a bound in `requires_trait`
--> src/lib.rs:11:22
|
11 | fn requires_trait<T: Trait>(_: T) {}
| ^^^^^ required by this bound in `requires_trait`
```
Part of rust-lang/trait-system-refactor-initiative#148
Use `structurally_normalize` instead of manual `normalizes-to` goals in alias relate errors
r? `@lcnr`
I added `structurally_normalize_term` so that code that is generic over ty or const can use the structurally normalize helpers. See `tests/ui/traits/next-solver/diagnostics/alias_relate_error_uses_structurally_normalize.rs` for a description of the reason for the (now fixed) ICEs
Refactor dyn-compatibility error and suggestions
This CL makes a number of small changes to dyn compatibility errors:
- "object safety" has been renamed to "dyn-compatibility" throughout
- "Convert to enum" suggestions are no longer generated when there exists a type-generic impl of the trait or an impl for `dyn OtherTrait`
- Several error messages are reorganized for user readability
Additionally, the dyn compatibility error creation code has been split out into functions.
cc #132713
cc #133267
r? `@compiler-errors`
This CL makes a number of small changes to dyn compatibility errors:
- "object safety" has been renamed to "dyn-compatibility" throughout
- "Convert to enum" suggestions are no longer generated when there
exists a type-generic impl of the trait or an impl for `dyn OtherTrait`
- Several error messages are reorganized for user readability
Additionally, the dyn compatibility error creation code has been
split out into functions.
cc #132713
cc #133267
Properly record metavar spans for other expansions other than TT
This properly records metavar spans for nonterminals other than tokentree. This means that we operations like `span.to(other_span)` work correctly for macros. As you can see, other diagnostics involving metavars have improved as a result.
Fixes#132908
Alternative to #133270
cc `@ehuss`
cc `@petrochenkov`
Update our range `assume`s to the format that LLVM prefers
I found out in https://github.com/llvm/llvm-project/issues/123278#issuecomment-2597440158 that the way I started emitting the `assume`s in #109993 was suboptimal, and as seen in that LLVM issue the way we're doing it -- with two `assume`s sometimes -- can at times lead to CVP/SCCP not realize what's happening because one of them turns into a `ne` instead of conveying a range.
So this updates how it's emitted from
```
assume( x >= LOW );
assume( x <= HIGH );
```
or
```
// (for ranges that wrap the range)
assume( (x <= LOW) | (x >= HIGH) );
```
to
```
assume( (x - LOW) <= (HIGH - LOW) );
```
so that we don't need multiple `icmp`s nor multiple `assume`s for a single value, and both wrappping and non-wrapping ranges emit the same shape.
(And we don't bother emitting the subtraction if `LOW` is zero, since that's trivial for us to check too.)
```
error: couldn't read `$DIR/not-utf8-bin-file.rs`: stream did not contain valid UTF-8
--> $DIR/not-utf8-2.rs:6:5
|
LL | include!("not-utf8-bin-file.rs");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: `[193]` is not valid utf-8
--> $DIR/not-utf8-bin-file.rs:2:14
|
LL | let _ = "�|�␂!5�cc␕␂��";
| ^
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
```
When we attempt to load a Rust source code file, if there is a OS file failure we try reading the file as bytes. If that succeeds we try to turn it into UTF-8. If *that* fails, we provide additional context about *where* the file has the first invalid UTF-8 character.
Fix#76869.
Add fixme and test for issue #135289
This PR:
- adds a test minimizing issue #135289 for PR #135310
- adds a fixme about the suboptimal fix for the ICE
I've verified the test indeed ICEs with 3f2f695d68 reverted.
r? `@estebank`
tests: delete `cat-and-grep-sanity-check`
Part of #121876.
All remaining `Makefile`s have open PRs that do not rely on platform `cat` or `grep` or the `cat-and-grep` script.
When a struct definition has default field values, and the use struct ctor has missing field, if all those missing fields have defaults suggest `..`:
```
error[E0063]: missing fields `field1` and `field2` in initializer of `S`
--> $DIR/non-exhaustive-ctor.rs:16:13
|
LL | let _ = S { field: () };
| ^ missing `field1` and `field2`
|
help: all remaining fields have defaults, use `..`
|
LL | let _ = S { field: (), .. };
| ++++
```
remove support for the (unstable) #[start] attribute
As explained by `@Noratrieb:`
`#[start]` should be deleted. It's nothing but an accidentally leaked implementation detail that's a not very useful mix between "portable" entrypoint logic and bad abstraction.
I think the way the stable user-facing entrypoint should work (and works today on stable) is pretty simple:
- `std`-using cross-platform programs should use `fn main()`. the compiler, together with `std`, will then ensure that code ends up at `main` (by having a platform-specific entrypoint that gets directed through `lang_start` in `std` to `main` - but that's just an implementation detail)
- `no_std` platform-specific programs should use `#![no_main]` and define their own platform-specific entrypoint symbol with `#[no_mangle]`, like `main`, `_start`, `WinMain` or `my_embedded_platform_wants_to_start_here`. most of them only support a single platform anyways, and need cfg for the different platform's ways of passing arguments or other things *anyways*
`#[start]` is in a super weird position of being neither of those two. It tries to pretend that it's cross-platform, but its signature is a total lie. Those arguments are just stubbed out to zero on ~~Windows~~ wasm, for example. It also only handles the platform-specific entrypoints for a few platforms that are supported by `std`, like Windows or Unix-likes. `my_embedded_platform_wants_to_start_here` can't use it, and neither could a libc-less Linux program.
So we have an attribute that only works in some cases anyways, that has a signature that's a total lie (and a signature that, as I might want to add, has changed recently, and that I definitely would not be comfortable giving *any* stability guarantees on), and where there's a pretty easy way to get things working without it in the first place.
Note that this feature has **not** been RFCed in the first place.
*This comment was posted [in May](https://github.com/rust-lang/rust/issues/29633#issuecomment-2088596042) and so far nobody spoke up in that issue with a usecase that would require keeping the attribute.*
Closes https://github.com/rust-lang/rust/issues/29633
try-job: x86_64-gnu-nopt
try-job: x86_64-msvc-1
try-job: x86_64-msvc-2
try-job: test-various
Rework dyn trait lowering to stop being so intertwined with trait alias expansion
This PR reworks the trait object lowering code to stop handling trait aliases so funky, and removes the `TraitAliasExpander` in favor of a much simpler design. This refactoring is important for making the code that I'm writing in https://github.com/rust-lang/rust/pull/133397 understandable and easy to maintain, so the diagnostics regressions are IMO inevitable.
In the old trait object lowering code, we used to be a bit sloppy with the lists of traits in their unexpanded and expanded forms. This PR largely rewrites this logic to expand the trait aliases *once* and handle them more responsibly throughout afterwards.
Please review this with whitespace disabled.
r? lcnr
Reexport likely/unlikely in std::hint
Since `likely`/`unlikely` should be working now, we could reexport them in `std::hint`. I'm not sure if this is already approved or if it requires approval
Tracking issue: #26179
When LLVM's location discriminator value limit is exceeded, emit locations with dummy spans instead of dropping them entirely
Dropping them fails `-Zverify-llvm-ir`.
Fixes#135332.
r? `@jieyouxu`
Rollup of 7 pull requests
Successful merges:
- #135542 (Add the concrete syntax for precise capturing to 1.82 release notes.)
- #135700 (Emit single privacy error for struct literal with multiple private fields and add test for `default_field_values` privacy)
- #135722 (make it possible to use ci-rustc on tarball sources)
- #135729 (Add debug assertions to compiler profile)
- #135736 (rustdoc: Fix flaky doctest test)
- #135738 (Replace usages of `map_or(bool, ...)` with `is_{some_and|none_or|ok_and}`)
- #135747 (Rename FileName::QuoteExpansion to CfgSpec)
r? `@ghost`
`@rustbot` modify labels: rollup
Match Ergonomics 2024: document and reorganize the currently-implemented feature gates
The hope here is to make it easier to adjust, understand, and test the experimental pattern typing rules implemented in the compiler. This PR doesn't (or at isn't intended to) change any behavior or add any new tests; I'll be handling that later. I've also included some reasoning/commentary on the more involved changes in the commit messages.
Relevant tracking issue: #123076
r? `@Nadrieril`
fully de-stabilize all custom inner attributes
`#![test]` and `#![rustfmt::skip]` were accidentally accepted in more places than they should. These have been marked as soft-unstable since forever (https://github.com/rust-lang/rust/pull/82399) and shown in future-compat reports since Rust 1.77 (https://github.com/rust-lang/rust/pull/116274).
Cc `@rust-lang/lang` `@petrochenkov`
Emit single privacy error for struct literal with multiple private fields and add test for `default_field_values` privacy
Add test ensuring that struct with default field values is not constructable if the fields are not accessible.
Collect all unreachable fields in a single struct literal struct and emit a single error, instead of one error per private field.
```
error[E0451]: fields `beta` and `gamma` of struct `Alpha` are private
--> $DIR/visibility.rs:18:13
|
LL | let _x = Alpha {
| ----- in this type
LL | beta: 0,
| ^^^^^^^ private field
LL | ..
| ^^ field `gamma` is private
```
